* 2:1 or 4:1 wide input range * 2kVDC/1 second isolation * -40C to +80C operating temperature @ full load * Industry standard pinout (SIP8) * EN/UL62368 and UL60950 certified, CB report Features Regulated Converters * Low cost Description The RSOE(-Z) is a low cost isolated, regulated and short-circuit protected DC/DC converter designed for industrial applications. A compact SIP8 case size, 2:1 input or 4:1 input, 2kVDC isolation and a wide operating temperature range of -40C to +80C without derating makes the RSOE(-Z) series ideal for industrial, transport and general-purpose on-board 5V power supplies. Industrial Class A EMC levels can be met with a simple Pi-filter and the converters come with a three year warranty. DC/DC Converter RSOE(-Z) 1 Watt 3 SIP8 Single Output Selection Guide Part Number Input Input Current Output Output Efficiency max. Capacitive Voltage Range @ full load Voltage Current typ. (1) Load (2) [VDC] [mA] [VDC][mA] [%] [F] RSOE-0505S/H2 4.5 - 9 265 5 200 76 6800 RSOE-2405S/H2 18 - 36 52 5 200 80 6800 RSOE-1205SZ/H2 4.5 - 18 105 5 200 79 6800 RSOE-2405SZ/H2 9 - 36 53 5 200 79 6800 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max. cap load is tested at minimum input and full resistive load Model Numbering RE CO NVE R T S U TS M P C TS compliant C D IA N T PRO M REACH CO 10 from 10 PL O R S Isolation Voltage (3) M C E R RE T compliant U LIA D N T PRO Input Voltage Range (4) E224736 Notes: Note3: suffix "/H2" standard isolation voltage 2kVDC/1 second Note4: without suffix 2:1 input voltage range with suffix "Z" 4:1 input voltage range Ordering Examples: www.recom-power.com C O N V ER RoHS 2 + Single RSOE-1205SZ/H2 RSOE-0505S/H2 M CO nom. Input Voltage Output Voltage O E RSOE-__ __S /_ C 12Vin 5Vin 4:1 input voltage range 2:1 input voltage range 5Vout 5Vout UL62368-1 certified C22.2 No. 62368-1-14 certfied UL60950 certified C22.2 No. 60950-1-07 certified IEC/EN62368-1 certified EN55032/55024 compliant CB Report 2kVDC/1 second isolation 2kVDC/1 second isolation REV.: 4/2020 ECO-1 RSOE(-Z) DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal Vin, full load unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor 2:1 input nom. Vin= 5VDC nom. Vin= 24VDC 4.5VDC 18VDC 5VDC 24VDC 9VDC 36VDC 4:1 input (suffix "Z") nom. Vin= 12VDC nom. Vin= 24VDC 4.5VDC 9VDC 12VDC 24VDC 18VDC 36VDC 0VDC Input Voltage Range Maximum Reverse Voltage Input Surge Voltage 100ms max. 2:1 input Quiescent Current 4:1 input (suffix "Z") nom. Vin= 5VDC nom. Vin= 12VDC nom. Vin= 24VDC nom. Vin= 5VDC nom. Vin= 24VDC 15VDC 25VDC 50VDC 40mA 3mA nom. Vin= 12VDC nom. Vin= 24VDC 10mA 5mA Start-up time 500s Rise time 450s Hold-up time 10s Internal Operating Frequency 2:1 input 4:1 input (suffix "Z") 130kHz 250kHz Minimum Load (5) 2:1 input 4:1 input (suffix "Z") 0% 10% Output Ripple and Noise (6) 20MHz BW 2:1 input 4:1 input (suffix "Z") 75mVp-p 100mVp-p Open or 0VDC< VCTRL<0.8VDC 2VDC< VCTRL<6VDC DC-DC ON DC-DC OFF VCTRL= 5VDC VCTRL= 3.3VDC ON/OFF CTRL Input Current of CTRL Pin 3ms 15mA 10mA 0.75mA Standby Current 1.5mA Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met Note6: Measurements are made with a 0.1F MLCC across output (low ESR) ON/OFF CTRL Circuit +Vin VCTRL -Vin +Vin 1N4148 68 +Vout +Vout DC-DC ON: Open or 0VDC<VCTRL<0.8VDC DC-DC OFF: 2VDC<VCTRL<6VDC CTRL -Vin -Vout -Vout continued on next page www.recom-power.com REV.: 4/2020 ECO-2 RSOE(-Z) DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal Vin, full load unless otherwise specified) Efficiency vs. Load RSOE-2405S/H2 100 100 90 90 80 80 70 70 Efficiency [%] Efficiency [%] RSOE-0505S/H2 60 50 40 30 10 0 0 10 20 30 40 50 60 70 80 90 50 40 18Vin 20Vin 24Vin 30Vin 36Vin 30 4.5Vin 5Vin 7Vin 9Vin 20 60 20 10 0 100 0 10 20 30 Output Load [%] 90 90 80 80 70 70 Efficiency [%] Efficiency [%] 100 60 50 40 30 20 10 20 30 40 50 60 70 80 90 100 70 80 90 60 50 40 30 4.5Vin 5Vin 12Vin 18Vin 10 60 RSOE-2405SZ/H2 100 0 50 Output Load [%] RSOE-1205SZ/H2 0 40 9Vin 12Vin 24Vin 36Vin 20 10 0 100 0 10 Output Load [%] 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Output Accuracy Value 2.0% max. Line Regulation low line to high line, full load 2:1 input 4:1 input (suffix "Z") 0.2% max. 0.5% typ. Load Regulation 0% to 100% load 2:1 input 4:1 input (suffix "Z") 0.5% max. 0.5% typ. continued on next page www.recom-power.com REV.: 4/2020 ECO-3 RSOE(-Z) DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal Vin, full load unless otherwise specified) Deviation vs. Load RSOE-0505S/H2 1.5 1.5 1.0 1.0 0.5 0 -0.5 0.5 0 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0 10 20 30 40 50 60 RSOE-2405S/H2 2.0 Deviation [%] Deviation [%] 2.0 70 80 90 -2.0 100 0 10 20 30 Output Load [%] 1.5 1.5 1.0 1.0 0.5 0 -0.5 -1.5 40 50 60 90 100 70 80 90 100 -0.5 -1.5 30 80 0 -1.0 20 70 0.5 -1.0 10 60 RSOE-2405SZ/H2 2.0 Deviation [%] Deviation [%] RSOE-1205SZ/H2 0 50 Output Load [%] 2.0 -2.0 40 70 80 90 -2.0 100 0 10 20 30 40 50 60 Output Load [%] Output Load [%] PROTECTIONS Parameter Type Short Circuit Protection (SCP) Isolation Voltage (7) Isolation Resistance Value below 100mW I/P to O/P continuous, auto recovery tested for 1 second Isolation Capacitance 100pF max. Insulation Grade Notes: Note7: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note8: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type www.recom-power.com 2kVDC 1G min. REV.: 4/2020 functional ECO-4 RSOE(-Z) DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal Vin, full load unless otherwise specified) ENVIRONMENTAL Parameter Condition without derating (refer to "Derating Graph") Operating Temperature Range Value 2:1 input 4:1 input (suffix "Z") -40C to +80C -40C to +75C Maximum Case Temperature +105C Temperature Coefficient 0.05%/K Operating Altitude 5000m Operating Humidity non-condensing 5% - 95% RH max. Pollution Degree PD2 Vibration MIL-STD-202G according to MIL-HDBK-217F, G.B. MTBF 2:1 input +25C +80C 3073 x 103 hours 845 x 103 hours 4:1 input (suffix "Z") +25C +75C 2800 x 103 hours 950 x 103 hours Derating Graph (@ Chamber and natural convection 0.1m/s) RSOE-xx05SZ/H2 100 100 90 90 80 80 70 70 Output Load [%] Output Load [%] RSOE-xx05S/H2 60 50 40 60 50 40 30 30 20 20 10 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 75 Ambient Temperature [C] Ambient Temperature [C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety Audio/Video, information and communication technology equipment Safety requirements Audio/Video, information and communication technology equipment Safety requirements (CB Scheme) E224736-A48 L0339m37-CB-1-B1 RoHS2 Standard UL60950-1, 2nd Edition, 2014 CSA C22.2 No. 60950-1-07, 2nd Ed. 2014 UL62368-1, 2nd Edition, 2014 CSA C22.2 Nr. 62368-1-14, 2nd Ed. 2014 IEC/EN62368-1, 2nd Edition, 2014 RoHS 2011/65/EU + AM2015/863 continued on next page www.recom-power.com REV.: 4/2020 ECO-5 RSOE(-Z) DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal Vin, full load unless otherwise specified) EMC Compliance Conditions Standard / Criterion with external filter (see filter suggestion below) Electromagnetic compatibility of multimedia equipment - Emission requirements EN55032, Class A EN55032, Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement EN55024, 2015 ESD Electrostatic discharge immunity test 8kV Air; 4kV Contact IEC61000-4-2, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 3V/m IEC61000-4-3, Criteria A Fast Transient and Burst Immunity DC Power Port: 0.5kV IEC61000-4-4, Criteria A Surge Immunity DC Power Port: 0.5kV IEC61000-4-5, Criteria A DC Power Port: 3V IEC61000-4-6, Criteria A IEC61000-4-8, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields Power Magnetic Field 50Hz, 1A/m Surge Protection Circuit according to IEC61000-4-5, Criteria A +Vin F1 +Vin DSr1 +Vout +Vout C1 -Vin -Vin -Vout -Vout DSr1 C1 RSOE-0505S/H2 P4SMAJ11A N/A RSOE-2405S/H2 P4SMAJ18A 220F/100V RSOE-1205SZ/H2 P4SMAJ36A 470F/100V RSOE-2405SZ/H2 P4SMAJ36A 470F/100V Model EMC Filtering Suggestions for EN55032 L1 +Vin +Vin C1 +Vout +Vout CMC1 +Vin C2 C1 -Vin -Vin -Vout -Vout C2 -Vin C3 Component List Class A Model C1 RSOE-0505S/H2 RSOE-2405S/H2 +Vout 22F/50V MLCC +Vout C3 L1 22F/50V MLCC N/A 3H choke -Vout RSOE-1205SZ/H2 RSOE-2405SZ/H2 22F/50V MLCC CMC1 +Vin C1 -Vout Component List Class A Model C1 C2 +Vin +Vout -Vin -Vout C2 C3 L1 22F/50V MLCC 150pF/3kV 3H choke C2 C3 CMC1 22F/50V MLCC 1000pF/3kV 0.45mH CMC +Vout C2 -Vin -Vout C3 Component List Class B Model C1 RSOE-0505S/H2 RSOE-2405S/H2 22F/50V MLCC www.recom-power.com C2 C3 CMC1 Component List Class B Model C1 22F/50V MLCC 1000pF/3kV 0.45mH CMC RSOE-2405SZ/H2 RSOE-1205SZ/H2 REV.: 4/2020 22F/50V MLCC ECO-6 RSOE(-Z) DC/DC Converter Series Specifications (measured @ Ta= 25C, nominal Vin, full load unless otherwise specified) DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case potting PCB non-conductive black plastic (UL94V-0) epoxy (UL94V-0) FR4 (UL94V-0) Dimension (LxWxH) 21.8 x 9.2 x 11.1mm Weight 4.7g typ. Dimension Drawing (mm) Pinning Information embossed logo 21.8 11.1 9.2 0.50 Marking 0.250.05 4.10 0.51+0.10/-0.05 Recommended Footprint Details 2.00 5 6 7 8 2.54 Bottom View 1 2 3 Single -Vin +Vin CTRL NC +Vout -Vout NC NC= no connection Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 3.20 1.00 O +0.15/-0 Pin # 1 2 3 5 6 7 8 1 2 3 5 6 7 8 Top View 7x2.54= 17.78 2.54 PACKAGING INFORMATION Packaging Dimension (LxWxH) tube Packaging Quantity 22pcs Storage Temperature Range Storage Humidity 520.0 x 11.2 x 18.2mm -55C to +125C non-condensing 5% - 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 4/2020 ECO-7