www.clare.com
DS-CPC1301-R04 1
CPC1301
Optocoupler with
High-Voltage Darlington Output
RoHS
2002/95/EC e3
Pb
Part Number Description
CPC1301G 4-Pin DIP (100/Tube)
CPC1301GR 4-Pin Surface Mount (100/Tube)
CPC1301GRTR 4-Pin Surface Mount (1000/Reel)
Parameter Rating Units
Breakdown Voltage - BVCEO 350 VP
Current Transfer Ratio - CTR 1000-8000 %
Applications
Features
Description
Ordering Information
Pin Configuration
• Telecom Switching
• Tip/Ring Circuits
• Hook Switch
• Modem Switching (Laptop, Notebook, Pocket Size)
• Loop Detect
• Ringing Detect
• Current Sensing
• 5000Vrms Input/Output Isolation
• 350VP Breakdown Voltage
• Small 4-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
The CPC1301 is a unidirectional input optocoupler
with a high-voltage Darlington output. Light output
from the highly efficient GaAlAs infrared LED
activates the optically coupled silicon NPN
photo-Darlington output transistor. The input LED and
the output transistor are separated by a 5000Vrms
isolation barrier.
With a LED current of only 1mA, a current transfer
ratio of 1000% to 8000% is guaranteed at the
collector of the 350V Darlington output transistor.
The CPC1301's low input current, high current
transfer ratio, high output voltage capability, and
large isolation barrier rating make it ideal for many
applications such as telecom, industrial, and power
control.
Approvals
1
A
K
C
E
2
4
3
• UL 1577 Approved Component: File E76270
• CSA Certified Component: Certificate 1172007
• EN 60950 Certified Component:
TUV Certificate B 10 05 49410 006
www.clare.com
2R04
CPC1301
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Electrical Characteristics @ 25ºC
Parameters Conditions Symbol Min Typ Max Units
Output Characteristics
Phototransistor Breakdown Voltage ICEO=100µA BVCEO 350 - - VP
Emitter-Collector Breakdown Voltage IE=0.1mA BVECO 0.3 - - V
Phototransistor Output (Dark) Current VCEO=200V, IF=0mA ICEO - - 100 nA
Saturation Voltage IC=10mA, IF=1mA VCE(Sat)
--1V
IC=100mA, IF=10mA - - 1.2 V
Current Transfer Ratio IF=1mA, VCE=1V CTR 1000 5500 8000 %
Output Capacitance VCEO=50V, f=1MHz COUT -13-pF
Input Characteristics
Input Control Current IC=10mA, VCE=1V IF- 0.07 1 mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Input Reverse Current VR=5V IR- - 10 µA
Common Characteristics
Input to Output Capacitance - CI/O -3-pF
Parameter Ratings Units
Breakdown Voltage, BVCEO 350 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Phototransistor Power Dissipation 2150 mW
Isolation Voltage, Input to Output 5000 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / oC
2 Derate linearly 1.5 mW / oC
Characteristic Symbol Test Condition Typ Units
Rise Time tR
VCC=10V
IF=10mA
RL=100Ω
40
μs
Fall Time tF2.6
Turn-On Time ton 2.75
Storage Time tS20
Turn-Off Time toff 60
Turn-On Time ton VCC=10V
IF=16mA
RL=180Ω
1
Storage Time tS40
Turn-Off Time toff 80
Switching Characteristics @ 25ºC
Switching Time Test Circuit VCC
VCE
RL
IF
Pulse Width=5ms
Duty Cycle=50%
IF
10%
90%
ton toff
t S
VCE t Ft R
CPC1301
www.clare.com 3
R04
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
LED Forward Voltage (V)
1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55
LED Current (mA)
0
10
20
30
40
50
LED Current (IF)
vs. LED Forward Voltage (VF)
(TA=25ºC)
LED Forward Voltage (V)
1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55
LED Current (mA)
0.1
1
10
100
LED Current (IF)
vs. LED Forward Voltage (VF)
(TA=25ºC)
100,000
0.1 110 100
10,000
1000
100
10
LED Current (mA)
CTR (%)
VCE=1.5V
VCE=1.0V
CTR vs. LED Current (IF)
(TA=25ºC)
LED Forward Current (mA)
Collector Current IC (mA)
0.01
1000
100
10
1
0.1 1 10 100
VCE=1.0V
VCE=1.5V
Collector Current
vs. LED Current (IF)
(TA=25ºC)
Temperature (ºC)
Collector Current IC (mA)
Collector Current vs. Temperature
(VCE = 1.2V)
375
300
225
150
75
0
-40 -20 0 20 40 60 80 100
I
F
=10mA
I
F
=5mA
I
F
=1mA
I
F
=0.5mA
Collector-Emitter Voltage VCE (V)
Collector Current IC (mA)
0
180
160
140
120
100
80
60
40
20
00.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Collector Current vs.
Collector-Emitter Voltage
(TA=25ºC)
IF = 1mA
IF = 0.5mA
IF = 2mA
IF = 5mA
IF = 10mA
Breakdown Voltage vs. Temperature
Temperature (ºC)
Breakdown Voltage BVCEO (VP)
-40
450
440
430
420
410
400
390
380
370
-15 10 35 60 85
Load Resistance (Ω)
10 100 1K 10K 100K
Switching Time (μs)
0.1
1
10
100
1000
Switching Time vs. Load Resistance
(TA=25ºC)
tOFF, IF=16mA
tOFF, IF=1.6mA
tON, IF=1.6mA
tON, IF=16mA
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
LED Forward Voltage
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
IF=2mA
Temperature (ºC)
Leakage Current (µA)
Leakage vs. Temperature
(VCEO
= 350V)
3.0
2.5
2.0
1.5
1.0
0.5
0-40 -20 0 20 40 60 80 120100
www.clare.com
4R04
CPC1301
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1301G / CPC1301GR MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1301G / CPC1301GR 250ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
CPC1301
www.clare.com 5
R04
MECHANICAL DIMENSIONS
PC Board Pattern (Top View)
Dimensions
mm
(inches)
PIN 1
6.350 ± 0.127
(0.250 ± 0.005)
4.572 ± 0.127
(0.180 ± 0.005)
0.991
(0.039)
9º (ALL)
3.30 ± 0.050
(0.130 ± 0.002)
0.254
(0.010)
9.144 ± 0.508
(0.360 ± 0.020)
7.620 ± 0.250
(0.300 ± 0.010)
7.620 ± 0.127
(0.300 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
6.350 ± 0.127
(0.250 ± 0.005)
9º (ALL)
0.457 ± 0.076
(0.018 ± 0.003)
2.540 ± 0.127
(0.100 ± 0.005) 3.175
(0.125)
0.508
(0.020)
2.159
(0.085)
Dimensions
mm
(inches)
PCB Land Pattern
PIN #1
6.350 ± 0.127
(0.250 ± 0.005)
0.991
(0.039)
9.525
(0.375)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.254
(0.025 ± 0.010)
0.254
(0.010)
3.300 ± 0.050
(0.130 ± 0.002)
3.480 ± 0.076
(0.137 ± 0.003)
2.287
(0.09)
8.80
(0.346)
1.60
(0.063)
0.95
(0.037)
9º ± 1º
(ALL)
0.102 min / 0.254 max
(0.004 min / 0.010 max)
4.572 ± 0.127
(0.180 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
2.287 ± 0.127
(0.090 ± 0.005)
CPC1301G
CPC1301GR
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1301-R04
©Copyright 2010, Clare, Inc.
All rights reserved. Printed in USA.
10/21/2010
For additional information please visit our website at: www.clare.com
6
CPC1301
Dimensions
mm
(inches)
NOTES:
1. All dimensions meet EIA-481-C requirements
2. Unless otherwise noted, tolerances = ±0.10 (0.004)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max) K0=4.20
(0.165)
K1=3.70
(0.146)
W=16.00±0.30
(0.630±0.012)
A0=10.01
(0.394)
P=12.00
(0.472)
B0=5.00
(0.197)
CPC1301GR Tape & Reel
