date 11/09/2011
page 1 of 4
cui.com
MODEL: CDM-20008 │ DESCRIPTION: SPEAKER
SPECIFICATIONS
parameter conditions/description min typ max units
diameter 20 mm
depth 3.1 mm
input power max. power: IEC-60268-5, lter 60 s on / 120 s
off, 10 cycles at room temp
0.3 0.5 W
impedance at 1 kHz, 1 V 6.8 8 9.2 Ω
resonant frequency at 1 V 448 560 672 Hz
sound pressure level 0.3 W, 10 cm ave. at 1, 1.2, 1.5, 2.0 kHz
1 W, 1 m ave. at 1, 1.2, 1.5, 2.0 kHz
89
75
92
78
95
81
dB
dB
response 7,000 Hz
distortion at 1 kHz, 0.3 W 5 %
buzz, rattle, etc. must be normal at sine wave 1.54 V
magnet size 8.0 x 1.0 mm
operating temperature -20 55 °C
weight 2.3 g
material metal
RoHS yes
FEATURES
•metal frame
•mylar cone
RoHS
MECHANICAL DRAWING
units: mm
tolerance: ± 0.5mm
SOLDERING POINT
NON-WOVEN
FABRIC
-+
CUI
0111
DATE STAMP
01(MONTH)
11(YEAR)
3.1 0.122
0.44511.3
1.0 0.039
BLACK
POLYESTER
20.0 0.787
SOLDERABILITY
parameter conditions/description
hand soldering 370 ±10°C for 3 ±1 seconds
For more information, please visit the product page.
CUI Inc │ MODEL: CDM-20008 │ DESCRIPTION: SPEAKER date 11/09/2011 │ page 4 of 4
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
techsupport@cui.com
rev. description date
1.0 initial release 11/09/2011
The revision history provided is for informational purposes only and is believed to be accurate.
REVISION HISTORY
For more information, please visit the product page.
