VII 130-06P1 IC25 = 121 A VCES = 600 V VCE(sat) typ. = 2.3 V IGBT Modules in ECO-PAC 2 Short Circuit SOA Capability Square RBSOA Preliminary data sheet OP9 VII L9 GH10 X13 E2 NTC B3 X15 Pin arangement see outlines VX18 K10 X16 Features IGBTs Symbol Conditions Maximum Ratings VCES TVJ = 25C to 150C VGES 600 V 20 V * NPT IGBT's - positive temperature coefficient of saturation voltage - fast switching IC25 IC80 TC = 25C TC = 80C 121 83 A A * FRED diodes - fast reverse recovery - low forward voltage ICM VCEK VGE = 15 V; RG = 2.2 ; TVJ = 125C RBSOA, Clamped inductive load; L = 100 H 200 360 A V * Industry Standard Package - solderable pins for PCB mounting - isolated DCB ceramic base plate tSC (SCSOA) VCE = VCES; VGE = 15 V; RG = 2.2 ; TVJ = 125C non-repetitive 10 s Ptot TC = 25C 379 W Symbol Conditions VCE(sat) IC = 130 A; VGE = 15 V; TVJ = 25C TVJ = 125C VGE(th) IC = 1.5 mA; VGE = VCE ICES VCE = VCES; IGES VCE = 0 V; VGE = 20 V td(on) tr td(off) tf Eon Eoff 2.3 2.6 4.5 VGE = 0 V; TVJ = 25C TVJ = 125C Inductive load, TVJ = 125C VCE = 300 V; IC = 80 A VGE = 15/0 V; RG = 2.2 Cies VCE = 25 V; VGE = 0 V; f = 1 MHz RthJC RthJH (per IGBT) with heatsink compound (0.42 K/m.K; 50 m) IXYS reserves the right to change limits, test conditions and dimensions. (c) 2006 IXYS All rights reserved 2.9 V V 6.5 V 1.2 7.5 mA mA 400 nA 25 11 150 30 0.8 2.3 ns ns ns ns mJ mJ 4.2 nF 0.66 0.33 K/W K/W * space and weight savings * reduced protection circuits * leads with expansion bend for stress relief Typical Applications * AC and DC motor control * AC servo and robot drives * power supplies * welding inverters 0650 Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. Advantages 1-2 VII 130-06P1 VII Reverse diodes (FRED) Symbol Conditions Maximum Ratings IF25 IF80 TC = 25C TC = 80C Symbol Conditions VF IF = 80 A; TVJ = 25C TVJ = 125C 1.85 1.40 IRM trr IF = 60 A; diF/dt = 500 A/s; TVJ = 125C VR = 300 V; VGE = 0 V 28 100 A ns RthJC RthJH with heatsink compound (0.42 K/m.K; 50 m) 1.32 0.66 K/W K/W 134.0 82.3 A A Characteristic Values min. typ. max. 2.06 V V B3 Temperature Sensor NTC Symbol Conditions Characteristic Values min. typ. max. R25 B25/50 T = 25C 4.75 5.0 3375 5.25 k K Module Conditions Maximum Ratings TVJ Tstg -40...+150 -40...+150 C C VISOL IISOL 1 mA; 50/60 Hz 3000 V~ Md mounting torque (M4) a Max. allowable acceleration 1.5 - 2.0 14 - 18 50 Nm lb.in. m/s2 Symbol Conditions Characteristic Values min. typ. max. dS dA Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) 11.2 11.2 Weight mm mm 24 Data according to IEC 60747 and refer to a single transistor or diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. (c) 2006 IXYS All rights reserved g 0650 Symbol 2-2