1. General description
The 74HC125-Q100; 74HCT125-Q100 is a quad buffer/line driver with 3-state outputs
controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to
assume a high impedance OFF-state. Inputs include clamp diodes which enable the use
of current limiting resistors to interface inputs to voltages in excess of VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Complies with JEDEC standard no. 7A
Input levels:
The 74HC125-Q10 0: CMOS levels
The 74HCT125-Q100: TTL levels
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
Multiple package options
3. Ordering information
74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
Rev. 2 — 19 January 2015 Product data sheet
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC125D-Q100 40 C to +125 C SO14 plastic small outline package; 14 leads; body width
3.9 mm SOT108-1
74HCT125D-Q100
74HC125PW-Q100 40 C to +125 C TSSOP14 plastic thin shrink small outline package; 14 leads;
body wid th 4.4 mm SOT402-1
74HCT125PW-Q100
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 2 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
4. Functional diagram
5. Pinning information
5.1 Pinning
Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram (one buffer)
PQD
$ <
2(
$ <
2(
$ <

2(
$ <



2(
PQD
(1




PQD
Q2(
Q$ Q<
Fig 4. Pin configuration SO1 4 an d TSSO P1 4
+&4
+&74
2
(
9&&
$
2(
<
$
2
(
<
$
2(
<
$
*1
'
<





DDD
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 3 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
5.2 Pin description
6. Functional description
[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
7. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SO14 packages: Ptot derates linearly with 8 mW/K above 70 C.
For TSSOP14 packages: Ptot derates linearly with 5.5 mW/K above 60 C.
Table 2. Pin de scription
Symbol Pin Description
1OE, 2OE, 3OE, 4OE 1, 4, 10, 13 output enable input (active LOW)
1A, 2A, 3A, 4A 2, 5, 9, 12 data input
1Y, 2Y, 3Y, 4Y 3, 6, 8, 11 data output
GND 7 ground (0 V)
VCC 14 supply voltage
Table 3. Function table[1]
Control Input Output
nOE nA nY
LLL
HH
HXZ
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +7 V
IIK input clamping current VI < 0.5 V or VI>V
CC +0.5 V [1] -20 mA
IOK output clamping current VO<0.5 V or VO>V
CC +0.5V [1] -20 mA
IOoutput current VO = 0.5 V to (VCC +0.5V) - 35 mA
ICC supply current - +70 mA
IGND ground current - 70 mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation [1] - 500 mW
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 4 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
8. Recommended operating conditions
9. Static characteristics
Table 5. Re commended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol Parameter Conditions 74HC125-Q100 74HCT125-Q100 Unit
Min Typ Max Min Typ Max
VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V
VIinput voltage 0 - VCC 0-V
CC V
VOoutput voltage 0 - VCC 0-V
CC V
Tamb ambient temperature 40 +25 +125 40 +25 +125 C
t/V input transition rise and fall rate VCC = 2.0 V - - 625 - - - ns/V
VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V
VCC = 6.0 V - - 83 - - - ns/V
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GN D (ground = 0 V).
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
74HC125-Q100
VIH HIGH-level
input voltage VCC = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V
VCC = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V
VCC = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V
VIL LOW-level
input voltage VCC = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V
VCC = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V
VCC = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V
VOH HIGH-level
output voltage VI=V
IH or VIL
IO=20 A; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V
IO=20 A; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V
IO=20 A; VCC = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V
IO=6.0 mA; VCC = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V
IO=7.8 mA; VCC = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V
VOL LOW-level
output voltage VI=V
IH or VIL
IO=20A; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V
IO=20A; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V
IO=20A; VCC = 6.0 V - 0 0.1 - 0.1 - 0.1 V
IO= 6.0 mA; VCC = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V
IO= 7.8 mA; VCC = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V
IIinput leakage
current VI=V
CC or GND;
VCC =6.0V --0.1 - 1.0 - 1.0 A
IOZ OFF-state
output current VI=V
IH or VIL;
VO=V
CC or GND;
VCC =6.0V
--0.5 - 5.0 - 10.0 A
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 5 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
ICC supply current VI=V
CC or GND; IO=0A;
VCC =6.0V - - 8.0 - 80 - 160 A
CIinput
capacitance -3.5- pF
74HCT125-Q100
VIH HIGH-level
input voltage VCC = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V
VIL LOW-level
input voltage VCC = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V
VOH HIGH-level
output voltage VI=V
IH or VIL; VCC =4.5V
IO=20 A 4.4 4.5 - 4.4 - 4.4 - V
IO=6 mA 3.98 4.32 - 3.84 - 3.7 - V
VOL LOW-level
output voltage VI=V
IH or VIL; VCC =4.5V
IO=20A - 0 0.1 - 0.1 - 0.1 V
IO= 6.0 mA - 0.16 0.26 - 0.33 - 0.4 V
IIinput leakage
current VI=V
CC or GND;
VCC =5.5V --0.1 - 1.0 - 1.0 A
IOZ OFF-state
output current VI=V
IH or VIL; VCC =5.5V;
VO=V
CC or GND --0.5 - 5.0 - 10 A
ICC supply current VI=V
CC or GND; IO=0A;
VCC =5.5V - - 8.0 - 80 - 160 A
ICC additional
supply current per input pin;
VI=V
CC 2.1 V; IO=0A;
other inputs at VCC or GND;
VCC = 4.5 V to 5.5 V
- 100 360 - 450 - 490 A
CIinput
capacitance -3.5- pF
Table 6. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GN D (ground = 0 V).
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 6 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
10. Dynamic characteristics
Table 7. Dy namic characteristics
Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; for test circuit see Figure 7.
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
74HC125-Q100
tpd propagation
delay nA to nY; see Figure 5 [1]
VCC = 2.0 V - 30 100 - 125 - 150 ns
VCC = 4.5 V - 11 20 - 25 - 30 ns
VCC =5V; C
L=15pF - 9 - - - - - ns
VCC = 6.0 V - 9 17 - 21 - 26 ns
ten enable time nOE to nY; see Figure 6 [2]
VCC = 2.0 V - 41 125 - 155 - 190 ns
VCC = 4.5 V - 15 25 - 31 - 38 ns
VCC = 6.0 V - 12 21 - 26 - 32 ns
tdis disable time nOE to nY; see Figure 6 [3]
VCC = 2.0 V - 41 125 - 155 - 190 ns
VCC = 4.5 V - 15 25 - 31 - 38 ns
VCC = 6.0 V - 12 21 - 26 - 32 ns
tttransition
time nY; see Figure 5 [4]
VCC = 2.0 V - 14 60 - 75 - 90 ns
VCC = 4.5 V - 5 12 - 15 - 18 ns
VCC = 6.0 V - 4 10 - 13 - 15 ns
CPD power
dissipation
capacitance
CL=50pF;f=1 MHz;
VI=GNDtoV
CC
[5] -22- - - - -pF
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 7 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
[1] tpd is the same as tPLH and tPHL.
[2] ten is the same as tPZH and tPZL.
[3] tdis is the same as tPLZ and tPHZ.
[4] tt is the same as tTHL and tTLH.
[5] CPD is used to determine the dynamic power dissipation (PD in W).
PD=C
PD VCC2fiN+(CLVCC2fo) where:
fi = input frequency in MHz;
fo= output frequency in MHz;
CL= output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CLVCC2fo) = sum of outputs.
11. Waveforms
74HCT125-Q100
tpd propagation
delay nA to nY; see Figure 5 [1]
VCC = 4.5 V - 15 25 - 31 - 38 ns
VCC =5V; C
L=15pF - 12 - - - - - ns
ten enable time nOE to nY; see Figure 6 [2]
VCC = 4.5 V - 15 28 - 35 - 42 ns
tdis disable time nOE to nY; see Figure 6 [3]
VCC = 4.5 V - 15 25 - 31 - 38 ns
tttransition
time nY; see Figure 5 [4] - 5 12 - 15 - 18 ns
CPD power
dissipation
capacitance
CL=50pF;f=1 MHz;
VI=GNDtoV
CC 1.5 V [5] -24- - - - -pF
Table 7. Dy namic characteristics …continued
Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; for test circuit see Figure 7.
Symbol Parameter Conditions 25 C40 C to +85 C40 C to +125 CUnit
Min Typ Max Min Max Min Max
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 5. Propagation delay input (nA) to output (nY)


Q$
LQSXW
Q<
RXWSXW
9
,
9090
90
90
*1'
92+
92/
W7+/ W7/+
W3+/ W3/+
DDD
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 8 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 6. Enable an d disable times


*1'
*1'
90
DDD
9,
90
W3/=
W3+=
Q2(LQSXW
RXWSXW
/2:WR2))
2))WR/2:
RXWSXW
+,*+WR2))
2))WR+,*+
92/
92+
RXWSXWV
HQDEOHG
RXWSXWV
HQDEOHG
RXWSXWV
GLVDEOHG
90
W3=+
W3=/
9&&
Table 8. Measurement points
Type Input Output
VMVM
74HC125-Q100 0.5VCC 0.5VCC
74HCT125-Q100 1.3 V 1.3 V
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 9 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
Test data is given in Table 9.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch.
Fig 7. Test circuit for measuring switching times
9
0
9
0
W
:
W
:


9
9
,
9
,
QHJDWLYH
SXOVH
SRVLWLYH
SXOVH
9
9
0
9
0


W
I
W
U
W
U
W
I
DDG
'87
9
&&
9
&&
9,92
57
5/6
&/
RSHQ
*
Table 9. Test data
Type Input Load S1 position
VItr, tfCLRLtPHL, tPLH tPZH, tPHZ tPZL, tPLZ
74HC125-Q100 VCC 6ns 15pF, 50 pF 1kopen GND VCC
74HCT125-Q100 3 V 6 ns 15 pF, 50 pF 1 kopen GND VCC
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 10 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
12. Package outline
Fig 8. Package outline SOT108-1 (SO14)
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 11 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
Fig 9. Package outline SOT402-1 (TSSOP14)
81,7 $
 $
 $
 E
S F ' ( 
H +
( / /
S 4 =\ZY ș
5()(5(1&(6
287/,1(
9(56,21
(8523($1
352-(&7,21 ,668('$7(
,(& -('(& -(,7$
PP 










  







R
R
 
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG


627 02 

Z 0
E
S
'
=
H

 
 
ș
$
$

$

/
S
4
GHWDLO;
/
$

+
(
(
F
Y 0 $
;
$
\
  PP
VFDOH
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
$
PD[

SLQLQGH[
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 12 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
13. Abbreviations
14. Revision history
Table 10. Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
LSTTL Low-power Schottky Transistor-Transistor Logic
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
MIL Military
TTL Transistor-Transistor Logic
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74HC_HCT125_Q100 v.2 2015011 9 Product data sheet - 74HC_HCT125_Q100 v.1
Modifications: •Table 7: Power dissipation capacitance condition for 74HCT125-Q100 is corrected.
74HC_HCT125_Q100 v.1 20130226 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 13 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is document m ay have cha nged since thi s document w as publish ed and may di ffe r in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not b e relied u pon to cont ain det ailed and
full information. For detailed and full informatio n see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conf lict with the short data sheet, the
full data sheet shall pre va il.
Product specificat ion — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
15.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warrant ies, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an information
source outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use in automotive applications — This Nexperia
product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in perso nal injury, death or severe propert y or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and t her efo re su ch inclu si on a nd/or use is at the cu stome r's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applicati ons or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Custo mers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party custo mer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
74HC_HCT125_Q100 All information provided in this document is subject to legal disclaimers.
Product data sheet Rev. 2 — 19 January 2015 14 of 15
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
No offer to sell or license — Nothing in this document may be interpret ed or
construed as an of fer to se ll product s that is op en for accept ance or the grant ,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
15.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respective ow ners.
16. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia 74HC125-Q100; 74HCT125-Q100
Quad buffer/line driver; 3-state
17. Contents
1 General description. . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 1
4 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
5 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
5.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Functional description . . . . . . . . . . . . . . . . . . . 3
7 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
8 Recommended operating conditions. . . . . . . . 4
9 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4
10 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6
11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
12 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
13 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 12
14 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12
15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
15.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
15.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
15.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
15.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
16 Contact information. . . . . . . . . . . . . . . . . . . . . 14
17 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
19 January 2015