Document Number: 63106 For any questions, contact: foil@vishay.com www.vishay.com
Revision: 28-Jun-07 1
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
IMPROVED PRODUCT
Any value at tolerance available within resistance range
INTRODUCTION
One of the most important parameters influencing stability is
the Temperature Coefficient of Resistance (TCR). Although
the TCR of Bulk Metal® Foil resistors is considered extremely
low, this characteristic has been further refined over the
years.
The VFCP Series utilizes ultra precision Bulk Metal® Z-Foil.
The Z-Foil technology provides a significant reduction to the
resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
Along with the inherently low PCR and TCR, Z-Foil
technology also provides remarkably improved load life
stablility, low noise and availability of tight tolerance.
The Flip Chip configuration provides a substantial PCB
space saving of more than 35 % vs. a surface mount chip
with wraparound terminations. The VFCP is available in any
value within the specified resistance range.
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
FEATURES
•
Temperature Coefficient of Resistance (TCR):
± 0.05 ppm/°C typical (0 °C to + 60 °C)
± 0.2 ppm/°C typical (- 55 °C to + 125 °C, +
25 °C Ref.)
•
Tolerance: to ± 0.01 % (100 ppm)
•Power Coefficient “ΔR due to self heating”
5 ppm at Rated Power
•
Load Life Stability (70 °C for 2000 hours):
± 0.005 % (50 ppm)
•
Power Rating to: 600 mW at + 70 °C
•
Electrostatic Discharge (ESD) above 25 000 V
•
Resistance Range: 10
Ω
to 150 k
Ω
(for lower and higher
values, please contact us)
•
Non Inductive, Non Capacitive Design
•
Short time overload
≤
0.005 % (50 ppm)
•
Non hot spot design
•
Rise time: 1ns without ringing
•
Current Noise: - 40 dB
•
Voltage Coefficient < 0.1 ppm/V
•
Non Inductive: < 0.08 µH
•
Terminal Finishes available: Lead (Pb)-free
Tin/Lead Alloy
•
Matched sets are available per request
•Any value available within resistance range (e.g. 1K2345)
•Prototype samples available from 48 hours. For more
information, please contact foil@vishay.com
•
For better performances please contact us
APPLICATIONS
•
Automatic Test Equipment (ATE)
•
High Precision Instrumentation
•
Laboratory, Industrial and Medical
•
Audio
•
EB Applications (electron beam scanning and recording
equipment, electron microscopes)
•
Military and Space
•
Airborne
•
Down Hole instrumentation
•
Communication
* Pb containing terminations are not RoHS compliant, exemptions may apply
TABLE 1 - TOLERANCE AND TCR VS
RESISTANCE VALUE
RESISTANCEVALUE
(Ω)
TOLERANCE
(%)
TYPICAL TCR AND
MAX. SPREAD
(- 55 °C to + 125 °C,
+ 25 °C Ref.)
250 to 150K ± 0.01 ± 0.2 ± 1.6
100 to < 250 ± 0.02 ± 0.2 ± 1.6
50 to < 100 ± 0.05 ± 0.2 ± 1.8
25 to < 50 ± 0.1 ± 0.2 ± 2.8
10 to < 25 ± 0.25 ± 0.2 ± 2.8
Bottom View
FIGURE 1 - POWER DERATING CURVE
Available
Pb-free
RoHS*
COMPLIANT
100
75
50
25
0
- 75 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temperature (°C)
Percent of Rated Power
+ 70 °C
- 55 °C
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
www.vishay.com For any questions, contact: foil@vishay.com Document Number: 63106
2Revision: 28-Jun-07
IMPROVED PRODUCT
Note
• For VFCP0805, VFCP1506, VFCP2010 and VFCP2512 DSCC Drawings, please contact foil@vishay.com
Note
1. As shown + 0.01 W to allow for measurement errors at low values.
TABLE 2 - DSCC SPECIFICATIONS (Vishay resistors are listed on the following DSCC specifications)
MODEL DSCC MIL SPEC
VFCP1206 2009 MIL-PRF-55342
FIGURE 2 -TRIMMING TO VALUES (Conceptual Illustration)
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Note: Foil shown in black, etched spaces in white
Interloop Capacitance
Reduction in Series
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Current Path
After Trimming
TABLE 3 - SPECIFICATIONS
CHIP
SIZE
RATED
POWER
(mW)
at + 70 °C
MAXIMUM
VOLTAGE
RATING
(≤)
RESISTANCE
RANGE (Ω)
MAXIMUM
WEIGHT
(mg)
0805 100 mW 34 V 10 to 12K 5.2
1206 250 mW 86 V 10 to 30K 10.3
1506 300 mW 109 V 10 to 40K 12
2010 400 mW 200 V 10 to 100K 25
2512 600 mW 220 V 10 to 150K 35
PR×
TABLE 4 - LOAD LIFE STABILITY
(+ 70 °C FOR 2000 HOURS)
CHIP SIZE
MAXIMUM
Δ
R LIMITS
0805 ± 0.005 % at 50 mW
± 0.01 % at 100 mW
1206 ± 0.005 % at 150 mW
± 0.01 % at 250 mW
1506 ± 0.005 % at 150 mW
± 0.01 % at 300 mW
2010 ± 0.005 % at 200mW
± 0.01 % at 400 mW
2512 ± 0.005 % at 500 mW
± 0.01 % at 600 mW
TABLE 5 - PERFORMANCES
TEST OR CONDITION
MIL-PRF-55342
CHARACTERISTIC E
ΔR LIMITS
TYPICAL
ΔR LIMITS
MAXIMUM
ΔR LIMITS1)
Thermal Shock ± 0.1 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
Low Temperature Operation ± 0.1 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
Short Time Overload ± 0.1 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
High Temperature Exposure ± 0.1 % ± 0.01 % (100 ppm) ± 0.02 % (200 ppm)
Resistance to Soldering Heat ± 0.2 % ± 0.005 % (50 ppm) ± 0.015 % (150 ppm)
Moisture Resistance ± 0.2 % ± 0.005 % (50 ppm) ± 0.02 % (200 ppm)
Load Life Stability + 70 °C for 2000 hours
at Rated Power
± 0.5 % ± 0.005 % (50 ppm) ± 0.01 % (100 ppm)
Document Number: 63106 For any questions, contact: foil@vishay.com www.vishay.com
Revision: 28-Jun-07 3
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
Vishay Foil Resistors
IMPROVED PRODUCT
Note
1. Land Pattern Dimensions are per IPC-782
Note
• The TCR values for < 100Ω are influenced by the termination
composition and result in deviation from this curve
TABLE 6 - DIMENSIONS AND LAND PATTERN in inches (millimeters)
CHIP
SIZE
L W THICKNESS D Z1) G1) X1)
± 0.005 (0.13) ± 0.005 (0.13) MAXIMUM ± 0.005 (0.13) MAXIMUM MINIMUM MAXIMUM
0805 0.079 (2.01) 0.049 (1.24) 0.025 (0.64) 0.010 (0.25) 0.078 (1.98) 0.053 (1.35) 0.049 (1.24)
1206 0.126 (3.20) 0.062 (1.57) 0.025 (0.64) 0.015 (0.38) 0.125 (3.18) 0.090 (2.29) 0.062 (1.57)
1506 0.150 (3.81) 0.062 (1.57) 0.025 (0.64) 0.012 (0.30) 0.150 (3.81) 0.120 (3.05) 0.062 (1.57)
2010 0.200 (5.08) 0.100 (2.54) 0.025 (0.64) 0.020 (0.51) 0.199 (5.05) 0.153 (3.89) 0.100 (2.54)
2512 0.250 (6.35) 0.126 (3.20) 0.025 (0.64) 0.024 (0.61) 0.250 (6.35) 0.196 (4.98) 0.126 (3.20)
D
W
L
L - 0.005 (0.13)
W1 [W - 0.003"]
Solder Terminals
BOTTOM VIEW (showing terminals for mounting)LAND PATTERN
G
Z
X
FIGURE 3 - CHIP CONFIGURATION
Protective Coating
High Purity Alumina Substrate
Resistive
Bulk
®
Metal Foil
Solder
FIGURE 4 - TYPICAL TCR CURVE Z-FOIL
(For more details, see Table 1)
+ 500
+ 200
+ 100
0
- 100
- 200
- 300
- 500
- 55 - 25 + 25 + 60 + 75 + 100 + 125
Ambient Temperature (°C)
ΔR
R
(ppm)
0
0.05 ppm/°C
- 0.1 ppm/°C 0.1 ppm/°C
0.14 ppm/°C
0.2 ppm/°C
- 0.16 ppm/°C
- 400
+ 300
+ 400
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
www.vishay.com For any questions, contact: foil@vishay.com Document Number: 63106
4Revision: 28-Jun-07
IMPROVED PRODUCT
Note
* For non-standard requests, please contact Application Engineering.
TABLE 7 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y162910K0000T9W (preferred part number format)
DENOTES PRECISION VALUE AER*
YR = Ω
K = kΩ
0 = Standard
9 = Lead (Pb)-free
1 - 999 = Custom
PRODUCT CODE RESISTANCE TOLERANCE PACKAGING
1629 = VFCP0805
1630 = VFCP1206
1631 = VFCP1506
1632 = VFCP2010
1633 = VFCP2512
T= ± 0.01 %
Q= ± 0.02 %
A= ± 0.05 %
B= ± 0.10 %
C= ± 0.25 %
D= ± 0.50 %
F= ± 1.00 %
R= Tape and Reel
W= Waffle Pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1629 10K0000 T 9 W:
TYPE: VFCP0805
VALUE: 10.0 kΩ
ABSOLUTE TOLERANCE: ± 0.01 %
TERMINATION: Lead (Pb)-free
PACKAGING: Waffle Pack
HISTORICAL PART NUMBER: VFCP0805 10K000 TCR0.2 T S W (will continue to be used)
VFCP0805 10K000 TCR0.2 T S W
MODEL OHMIC VALUE TCR RESISTANCE
TOLERANCE TERMINATION PACKAGING
VFCP0805
VFCP1206
VFCP1506
VFCP2010
VFCP2512
10.0 kΩCharacteristic T= ± 0.01 %
Q= ± 0.02 %
A= ± 0.05 %
B= ± 0.10 %
C= ± 0.25 %
D= ± 0.50 %
F= ± 1.00 %
S= Lead (Pb)-free
B= Tin/Lead
T= Tape and Reel
W= Waffle Pack
6291 K000Y1 T90 W0
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
