VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power FEATURES PR O DU CT Any value at tolerance available within resistance range INTRODUCTION One of the most important parameters influencing stability is the Temperature Coefficient of Resistance (TCR). Although the TCR of Bulk Metal(R) Foil resistors is considered extremely low, this characteristic has been further refined over the years. The VFCP Series utilizes ultra precision Bulk Metal(R) Z-Foil. The Z-Foil technology provides a significant reduction to the resistive element's sensitivity to ambient temperature variations (TCR) and to self heating when power is applied (power coefficient). IM PR O VE D Along with the inherently low PCR and TCR, Z-Foil technology also provides remarkably improved load life stablility, low noise and availability of tight tolerance. The Flip Chip configuration provides a substantial PCB space saving of more than 35 % vs. a surface mount chip with wraparound terminations. The VFCP is available in any value within the specified resistance range. Our Application Engineering Department is available to advise and make recommendations. For non-standard technical requirements and special applications, please contact us. TABLE 1 - TOLERANCE AND TCR VS RESISTANCE VALUE RESISTANCEVALUE () TOLERANCE (%) TYPICAL TCR AND MAX. SPREAD (- 55 C to + 125 C, + 25 C Ref.) 250 to 150K 0.01 0.2 1.6 100 to < 250 0.02 0.2 1.6 50 to < 100 0.05 0.2 1.8 25 to < 50 0.1 0.2 2.8 10 to < 25 0.25 0.2 2.8 APPLICATIONS * * * * * * * * * Automatic Test Equipment (ATE) High Precision Instrumentation Laboratory, Industrial and Medical Audio EB Applications (electron beam scanning and recording equipment, electron microscopes) Military and Space Airborne Down Hole instrumentation Communication FIGURE 1 - POWER DERATING CURVE Percent of Rated Power Bottom View * Temperature Coefficient of Resistance (TCR): 0.05 ppm/C typical (0 C to + 60 C) Pb-free Available 0.2 ppm/C typical (- 55 C to + 125 C, + 25 C Ref.) RoHS* * Tolerance: to 0.01 % (100 ppm) COMPLIANT * Power Coefficient "R due to self heating" 5 ppm at Rated Power * Load Life Stability (70 C for 2000 hours): 0.005 % (50 ppm) * Power Rating to: 600 mW at + 70 C * Electrostatic Discharge (ESD) above 25 000 V * Resistance Range: 10 to 150 k (for lower and higher values, please contact us) * Non Inductive, Non Capacitive Design * Short time overload 0.005 % (50 ppm) * Non hot spot design * Rise time: 1ns without ringing * Current Noise: - 40 dB * Voltage Coefficient < 0.1 ppm/V * Non Inductive: < 0.08 H * Terminal Finishes available: Lead (Pb)-free Tin/Lead Alloy * Matched sets are available per request * Any value available within resistance range (e.g. 1K2345) * Prototype samples available from 48 hours. For more information, please contact foil@vishay.com * For better performances please contact us + 70 C - 55 C 100 75 50 25 0 - 75 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature (C) * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63106 Revision: 28-Jun-07 For any questions, contact: foil@vishay.com www.vishay.com 1 VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power TABLE 2 - DSCC SPECIFICATIONS (Vishay resistors are listed on the following DSCC specifications) MODEL DSCC MIL SPEC VFCP1206 2009 MIL-PRF-55342 PR O DU CT Note * For VFCP0805, VFCP1506, VFCP2010 and VFCP2512 DSCC Drawings, please contact foil@vishay.com FIGURE 2 -TRIMMING TO VALUES (Conceptual Illustration) Current Path Before Trimming Interloop Capacitance Reduction in Series Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Mutual Inductance Reduction due to Change in Current Direction Note: Foil shown in black, etched spaces in white TABLE 4 - LOAD LIFE STABILITY (+ 70 C FOR 2000 HOURS) TABLE 3 - SPECIFICATIONS MAXIMUM VOLTAGE RATING ( P x R ) RESISTANCE RANGE () MAXIMUM WEIGHT (mg) 0805 100 mW 34 V 10 to 12K 5.2 IM PR O VE D CHIP SIZE RATED POWER (mW) at + 70 C CHIP SIZE MAXIMUM R LIMITS 0805 0.005 % at 50 mW 0.01 % at 100 mW 1206 0.005 % at 150 mW 0.01 % at 250 mW 1506 0.005 % at 150 mW 0.01 % at 300 mW 1206 250 mW 86 V 10 to 30K 10.3 1506 300 mW 109 V 10 to 40K 12 2010 400 mW 200 V 10 to 100K 25 2010 0.005 % at 200mW 0.01 % at 400 mW 2512 600 mW 220 V 10 to 150K 35 2512 0.005 % at 500 mW 0.01 % at 600 mW TABLE 5 - PERFORMANCES MIL-PRF-55342 CHARACTERISTIC E R LIMITS TYPICAL R LIMITS MAXIMUM R LIMITS1) Thermal Shock 0.1 % 0.005 % (50 ppm) 0.01 % (100 ppm) Low Temperature Operation 0.1 % 0.005 % (50 ppm) 0.01 % (100 ppm) Short Time Overload 0.1 % 0.005 % (50 ppm) 0.01 % (100 ppm) High Temperature Exposure 0.1 % 0.01 % (100 ppm) 0.02 % (200 ppm) Resistance to Soldering Heat 0.2 % 0.005 % (50 ppm) 0.015 % (150 ppm) Moisture Resistance 0.2 % 0.005 % (50 ppm) 0.02 % (200 ppm) Load Life Stability + 70 C for 2000 hours at Rated Power 0.5 % 0.005 % (50 ppm) 0.01 % (100 ppm) TEST OR CONDITION Note 1. As shown + 0.01 W to allow for measurement errors at low values. www.vishay.com 2 For any questions, contact: foil@vishay.com Document Number: 63106 Revision: 28-Jun-07 VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Ultra High Precision Z-Foil Flip Chip Resistor with TCR Vishay Foil Resistors of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power TABLE 6 - DIMENSIONS AND LAND PATTERN in inches (millimeters) BOTTOM VIEW (showing terminals for mounting) LAND PATTERN Solder Terminals PR O DU CT D W L - 0.005 (0.13) X G W1 [W - 0.003"] Z L CHIP SIZE L W THICKNESS D Z1) G1) X1) 0.005 (0.13) 0.005 (0.13) MAXIMUM 0.005 (0.13) MAXIMUM MINIMUM MAXIMUM 0805 0.079 (2.01) 0.049 (1.24) 0.025 (0.64) 0.010 (0.25) 0.078 (1.98) 0.053 (1.35) 0.049 (1.24) 1206 0.126 (3.20) 0.062 (1.57) 0.025 (0.64) 0.015 (0.38) 0.125 (3.18) 0.090 (2.29) 0.062 (1.57) 1506 0.150 (3.81) 0.062 (1.57) 0.025 (0.64) 0.012 (0.30) 0.150 (3.81) 0.120 (3.05) 0.062 (1.57) 2010 0.200 (5.08) 0.100 (2.54) 0.025 (0.64) 0.020 (0.51) 0.199 (5.05) 0.153 (3.89) 0.100 (2.54) 2512 0.250 (6.35) 0.126 (3.20) 0.025 (0.64) 0.024 (0.61) 0.250 (6.35) 0.196 (4.98) 0.126 (3.20) IM PR O VE D Note 1. Land Pattern Dimensions are per IPC-782 FIGURE 3 - CHIP CONFIGURATION High Purity Alumina Substrate Resistive Bulk(R) Metal Foil Solder Protective Coating Document Number: 63106 Revision: 28-Jun-07 FIGURE 4 - TYPICAL TCR CURVE Z-FOIL (For more details, see Table 1) + 500 + 400 + 300 + 200 + 100 R 0 R (ppm) - 100 0.05 ppm/C - 200 - 0.1 ppm/C - 300 0.1 ppm/C 0.14 ppm/C - 400 0.2 ppm/C - 0.16 ppm/C - 500 - 55 - 25 0 + 25 + 60 + 75 + 100 + 125 Ambient Temperature (C) Note * The TCR values for < 100 are influenced by the termination composition and result in deviation from this curve For any questions, contact: foil@vishay.com www.vishay.com 3 VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil) Vishay Foil Resistors Ultra High Precision Z-Foil Flip Chip Resistor with TCR of 0.05 ppm/C, 35 % Space Saving versus Wraparound Design and PCR of 5 ppm at Rated Power TABLE 7 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y162910K0000T9W (preferred part number format) VALUE AER* Y R= K = k 0 = Standard 9 = Lead (Pb)-free 1 - 999 = Custom Y 1 6 2 9 1 0 PR O DU CT DENOTES PRECISION K 0 0 0 0 T 9 W PRODUCT CODE RESISTANCE TOLERANCE PACKAGING 1629 = VFCP0805 1630 = VFCP1206 1631 = VFCP1506 1632 = VFCP2010 1633 = VFCP2512 T = 0.01 % Q = 0.02 % A = 0.05 % B = 0.10 % C = 0.25 % D = 0.50 % F = 1.00 % R = Tape and Reel W = Waffle Pack FOR EXAMPLE: ABOVE GLOBAL ORDER Y1629 10K0000 T 9 W: TYPE: VFCP0805 VALUE: 10.0 k ABSOLUTE TOLERANCE: 0.01 % TERMINATION: Lead (Pb)-free PACKAGING: Waffle Pack HISTORICAL PART NUMBER: VFCP0805 10K000 TCR0.2 T S W (will continue to be used) 10K000 TCR0.2 MODEL OHMIC VALUE TCR VFCP0805 VFCP1206 VFCP1506 VFCP2010 VFCP2512 10.0 k Characteristic IM PR O VE D VFCP0805 T S W RESISTANCE TOLERANCE TERMINATION PACKAGING S = Lead (Pb)-free B = Tin/Lead T = Tape and Reel W = Waffle Pack T = 0.01 % Q = 0.02 % A = 0.05 % B = 0.10 % C = 0.25 % D = 0.50 % F = 1.00 % Note * For non-standard requests, please contact Application Engineering. www.vishay.com 4 For any questions, contact: foil@vishay.com Document Number: 63106 Revision: 28-Jun-07 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1