! NEW PTS 840 Series Microminiature SMT Side Actuated Features/Benefits * 3.5 x 3.55 mm footprint * Front PIP leads option for Typical Applications * Nomad devices * Remote controls * Personal health diagnostics * Consumer electronics strong shear resistance * ESD pin option * Reduced footprint Tactile Switches B Specifications Electrical FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST N.O. TERMINALS: G and front PIP types for SMT TRAVEL: 0.2mm + 0.2mm / -0.1 mm LIFE: 100,000 cycles MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTACT RESISTANCE: INSULATION RESISTANCE: BOUNCE TIME: 12 VDC 50 mA 250 VA C (1mn) 500 m 100 M 10 ms Environmental Type without ground pin Operating Force (gf) SMT Leads Pegs PTS840 GM SMTR LFS PTS840 GK SMTR LFS PTS840 PM SMTR LFS PTS840 PK SMTR LFS PTS840 GMP SMTR LFS PTS840 GKP SMTR LFS with ground pin PTS840 ESDGM SMTR LFS PTS840 ESDGK SMTR LFS PTS840 ESDPM SMTR LFS PTS840 ESDPK SMTR LFS PTS840 ESDGMP SMTR LFS PTS840 ESDGKP SMTR LFS 160 220 160 220 160 220 -40/+70 -70/+80 -40/+70 -70/+80 -40/+70 -70/+80 G leads G leads P leads P leads G leads G leads No No No No Yes Yes 160 220 160 220 160 220 -40/+70 -70/+80 -40/+70 -70/+80 -40/+70 -70/+80 G leads G leads P leads P leads G leads G leads No No No No Yes Yes OPERATING TEMPERATURE: -40C to 85C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 Packaging In reels of 3,500 pieces Dimensions of reels according to EIA 481B External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 4 S M T 0 ESD Pin VOID No ESD Yes R L F S LFS RoHS, silver plated SMT Style G Gullwing P Front PIP Packaging SMTR Tape & reel Pegs* P with pegs Void no pegs Actuation Force M 160 gf K 220 gf * Peg option not valid for P SMT leads type Design Recommendations - "P" leads are recommended for applications where shear resistance is of importance - When a precise alignment between application button and the switch is requested, version with pegs are the right choice to limit the possible floating of the switch during solderability. Dimensions are shown: mm Specifications and dimensions subject to change 5 aug 13 B-24 www.ck-components.com ! NEW PTS 840 Series Microminiature SMT Side Actuated Standard G SMT Leads with ESD and Peg options 5 2 3 4 0,5 1,35 1 SCHEMATIC This ground pin is for ESD function only and not solderable Ground terminal can 00,05 be effective even if not soldered 50,1 2,20,1 1,10,1 1 2 3 4 2x 1 +0,2 0,7 -0,1 RECOMMENDED PCB LAYOUT 20 0,05 Scale Max 0,1 Max 1,7 1,80,05 4 3 2,50,1 0,40,1 1,80,1 2 1,50,1 3,55 2,9 1 1,450,1 1,950,1 0,6 0,5 0,2 4,7 3,5 0,5 5 B P SMT Leads with ESD option SCHEMATIC 5 PCB MOUNTING FACE 3 4 This ground pin is for ESD function only and not solderable 1 4 1 0,6 0 ,1 Max 1,7 0 ,5 0,1 3 2 ,5 0,1 0 ,4 0,1 2 Ground terminal can be effective even if not soldered 2 O 0,65 +0,1 0 Through hole metalized 1,1 5 1 2 1,9 5 0,1 5 1,45 0,1 0 ,6 1,35 00,05 5,50,1 2,20,1 4 3 4,050,1 0 ,8 0 ,1 3,5 0,5 0 ,5 0, 2 2 ,9 1 ,5 0,1 2 3,90,15 4,7 3, 55 1 0 ,0 5 Max RECOMMENDED PCB LAYOUT Dimensions are shown: mm Specifications and dimensions subject to change 5 aug 13 B-25 www.ck-components.com Tactile Switches 0 0,65 -0,1 PCB MOUNTING FACE ! NEW PTS 840 Series Microminiature SMT Side Actuated TAPE & REEL 4 1 ,7 5 1,5 2 5 ,5 CARRIER TAPE 1 2 0 ,3 9 ,3 C o v e r ta p e Tactile Switches B 8 18,4 Max 12,4+2 0 330 13 0,5 20,5 21 0,8 VOIR DETAIL A DETAIL A SCALE 0,5 REEL Dimensions are shown: mm Specifications and dimensions subject to change 5 aug 13 B-26 www.ck-components.com