200004A
HIGH SPEED
TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL DUAL-CHANNEL
6N135, 6N136 HCPL-2530
HCPL-2503 HCPL-2531
HCPL-4502
1. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%.
6. The 4.1 k$"load represents 1 LSTTL unit load of 0.36 mA and 6.1k$"pull-up resistor.
7. The 1.9 k$"load represents 1 TTL unit load of 1.6 mA and 5.6 k$"pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the
common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO%2.0 V). Common mode transient
immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM,
to assure that the output will remain in a logic low state (i.e., VO&0.8 V).
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
NOTES
Characteristics Test Conditions Symbol Min Typ** Max Unit
(Relative humidity = 45%)
Input-output (TA = 25°C, t = 5 s) II-O 1.0 µA
insulation leakage current (VI-O = 3000 VDC)
(Note 9)
Withstand insulation test voltage (RH !50%, TA = 25°C) VISO 2500 VRMS
(Note 9) ( t = 1 min.)
Resistance (input to output) (Note 9) (VI-O = 500 VDC) RI-O 1012 $
Capacitance (input to output) (Note 9) (f = 1 MHz) CI-O 0.6 pF
DC Current gain (IO = 3 mA, VO = 5 V) HFE 150
Input-Input (RH !45%, VI-I = 500 VDC) (Note 10) II-I 0.005 µA
Insulation leakage current t = 5 s, (HCPL-2530/2531 only)
Input-Input Resistance (VI-I = 500 VDC) (Note 10) RI-I 1011 $
(HCPL-2530/2531 only)
Input-Input Capacitance (f = 1 MHz) (Note 10) CI-I 0.03 pF
(HCPL-2530/2531 only)
ISOLATION CHARACTERISTICS (TA= 0 to 70°C Unless otherwise specified)
** All typicals at TA= 25°C