ABR600 - ABR610 AVALANCHE BRIDGE
RECTIFIERS
PRV : 50 - 1000 Volts
Io : 6.0 Amperes
FEATURES :
* High case dielectric strength
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* ldeal for printed circuit board
MECHANICAL DATA :
* Case : Reliable low cost construction
utilizing molded plastic technique
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per
MIL - STD 202 , Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Any
* Weight : 3.6 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
°
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL ABR
600 ABR
601 ABR
602 ABR
604 ABR
606 ABR
608 ABR
610 UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
Minimum Avalanche Breakdown Voltage at 100 µA VBO(min.) 100 150 250 450 700 900 1100 Volts
Maximum Avalanche Breakdown Voltage at 100 µA VBO(max.) 550 600 700 900 1150 1350 1550 Volts
Maximum Average Forward Current Tc = 50°CIF(AV) 6.0 Amps.
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method) IFSM 200 Amps.
Rating for fusing at ( t < 8.3 ms. ) I2t64 A2S
Maximum Forward Voltage per Diode at IF = 3.0 Amps. VF1.0 Volts
Maximum DC Reverse Current Ta = 25 °CIR10 µA
at Rated DC Blocking Voltage Ta = 100 °CIR(H) 200 µA
Typical Thermal Resistance (Note 1) RθJC 8.0 °C/W
Operating Junction Temperature Range TJ - 50 to + 150 °C
Storage Temperature Range TSTG - 50 to + 150 °C
Notes :
1 ) Thermal resistance from Junction to case with units mounted on a 2.6" x 1.4" x 0.06" THK ( 6.5 x 3.5 x 0.15 cm ) Al. plate.
UPDATE : APRIL 21, 1998
RATING
0.27 (6.9)
0.23 (5.8)
AC
AC
Dimensions in inches and ( millimeters )
BR6
0.62 (15.75)
0.58 (14.73)
0.127 (3.20)
0.047 (1.20)
0.445 (11.30)
0.405 (10.30)
0.158 (4.00)
0.142 (3.60)
0.042 (1.06)
0.038 (0.96)
0.75 (19.1)
Min.
RATING AND CHARACTERISTIC CURVES ( ABR600 - ABR610 )
FIG.1 - DERATING CURVE FOR OUTPUT FIG.2 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
PER DIODE
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
FORWARD VOLTAGE, VOLTS
8.0
6.0
4.0
2.0
10
100 10
1.0
160
0
200
0
120
80
40
0.1
10
80
0.01
0.01
1.0 0.1
100
140
0
20
40
60
120
PERCENT OF RATED REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FORWARD CURRENT, AMPERES
REVERSE CURRENT, MICROAMPERES
TJ = 25 °C
TJ = 100 °C
TJ = 25 °C
Pulse Width = 300 µs
1% Duty Cycle
HEAT SINK MOUNTING ON
2.6" x 1.4" x0.06" THK.
(7.5x7.5x0.3 cm.) Al. Plate
TJ = 25 °C
8.3 ms SINGLE SINE WAVE
JEDEC METHOD
