Surface mount type TPFSeries RoHS compliance Low ESR High capacitance Update TPF series achieves low ESR and high capacitance in the standard form. Specifications Items Condition Specifications Rated voltage (V) - 2.0 2.5 4.0 6.3 10 Surge voltage (V) - 2.3 2.9 4.6 7.2 12 Category temperature range () - -55 to 105 () 120Hz/20 M : 20 Rated capacitance range (F) 120Hz/20 150 to 1000 Capacitance tolerance 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 5 minutes Please see the attached characteristics list 100kHz/20 Please see the attached characteristics list Dissipation Factor (DF) Leakage current Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 100kHz/20 105, 2,000h, rated voltage applied Endurance 0.6 to 2.0 -55 Z/Z20 105 Z/Z20 0.6 to 2.0 C/C Within20% of the initial value DF < 1.5 times of the initial limit LC Damp heat (Steady State) 60, 90 to 95%RH, 500h, No-applied voltage Within the initial limit Within50%,-20% of the initial value(2TPF220M6,2TPF330M6,ETPF1000M6H5H) C/C Within40%, -20% of the initial value (Except for the above model) DF < LC 105, 1,000 cycles, 1k discharge resistance, surge voltage applied Surge 1.5 times of the initial limit < C/C 3 times of the initial limit Within5% of the initial value DF Within the initial limit LC < 3 times of the initial limit POSCAP Line-up Guidelines and precautions for use Products list Explanation of part numbers Packing specifications L W Image of case size (unit: mm) Dimensions Selection guide Series system diagram Size code L 0.3 W 0.2 H 0.21 S 0.2 W1 0.1 D2E D3L D4 7.3 7.3 7.3 4.3 4.3 4.3 1.8 2.8 3.8 1.3 1.3 1.3 2.4 2.4 2.4 1 0.1:D2E Fundamental structure haracteristics Reliability TPU TPH TPSF TPC TPE TPB TPLTPLF TPF TPF TA Surface mount type TPG TV TH TQC 100 H Recommended land pattern dimension Recommended soldering condition Technical data Marking S S Size list W1 RV F 150 220 330 470 680 1,000 2.0 RV : Rated voltage 2.5 4.0 6.3 10.0 D3L D2E D2E D3L D4,D3L D4,D3L D4 D3L D3L D4 D3L D3L D4 Surface mount type TPF Series TPF series characteristics list 2.0 2.0 10 6.3 6.3 6.3 6.3 4.0 4.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 6.3 4.0 2.5 2.5 2.5 2.5 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 330 220 150 330 220 220 220 470 330 680 680 680 470 470 470 330 470 680 1000 1000 680 470 2.0 2.0 10 6.3 6.3 6.3 6.3 4.0 4.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 6.3 4.0 2.5 2.5 2.5 2.5 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Please refer to page 65 for the compensation coefficient of maximum allowable ripple current. 132.0 88.0 150.0 207.9 138.6 138.6 138.6 188.0 132.0 170.0 170.0 170.0 117.5 117.5 117.5 82.5 296.1 272.0 250.0 250.0 170.0 117.5 6 6 15 9 12 9 5 10 12 10 7 6 10 7 6 7 10 10 6 5 5 5 4400 4400 3600 3900 4000 3900 4400 4400 4000 4400 4400 4400 4400 4400 4400 4400 4400 4400 5600 6100 6100 6100 1 100k to 500kHz,45 2 260 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 250 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a Under development POSCAP Line-up Guidelines and precautions for use Selection guide 2TPF330M6 2TPF220M6 10TPF150ML 6TPF330M9L 6TPF220ML 6TPF220M9L2 6TPF220M5L2 4TPF470ML 4TPF330ML D3L 2R5TPF680ML 2R5TPF680M7L 2R5TPF680M6L 2R5TPF470ML 2R5TPF470M7L 2R5TPF470M6L 2R5TPF330M7L 6TPF470MAH 4TPF680MAH ETPF1000M6H D4 ETPF1000M5H ETPF680M5H2 ETPF470M5H2 D2E Maximum allowable MSL Rated Category Category ESR LC Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms max () F V max/5min. 100kHz/20 100kHz1