2005-02-07Rev. 2.2Page 1
SPB12N50C3
Cool MOS™ Power Transistor VDS @ Tjmax 560 V
RDS(on) 0.38 Ω
ID11.6 A
Feature
• New revolutionary high voltage technology
• Ultra low gate charge
• Periodic avalanche rated
• Extreme dv/dtrated
• Ultra low effective capacitances
• Improved transconductance
P-TO263-3-2
-
Marking
12N50C3
Type Package Ordering Code
SPB12N50C3 P-TO263-3-2 Q67040-S4641
Maximum Ratings
Parameter Symbol Value Unit
SPB
Continuous drain current
TC = 25 °C
TC = 100 °C
I
D
11.6
7
A
Pulsed drain current,
t
p
limited by
T
j
ma
x
I
D
p
uls 34.8 A
Avalanche energy, single pulse
ID=5.5A, VDD=50V
E
AS 340 mJ
Avalanche energy, repetitive
t
AR limited by
T
jmax2)
ID=11.6A, VDD=50V
E
AR 0.6
Avalanche current, repetitive
t
AR
limited by T
j
ma
x
I
AR
11.6 A
Gate source voltage V
GS ±20 V
Gate source voltage AC (f >1Hz)
V
GS
±
30
Power dissipation,
TC = 25°C
P
tot 125 W
Operating and storage temperature T
j
,
T
st
g
-55...+150 °C
2005-02-07Rev. 2.2Page 2
SPB12N50C3
Maximum Ratings
Parameter Symbol Value Unit
Drain Source voltage slope
VDS = 400 V, ID = 11.6 A, Tj = 125 °C
dv/dt50 V/ns
Thermal Characteristics
Parameter Symbol Values Unit
min. typ. max.
Thermal resistance, junction - case RthJC - - 1 K/W
Thermal resistance, junction - case, FullPAK RthJC
_
FP - - 3.8
Thermal resistance, junction - ambient, leaded RthJA - - 62
Thermal resistance, junction - ambient, FullPAK RthJA
FP - - 80
SMD version, device on PCB:
@ min. footprint
@ 6 cm2 cooling area 3)
RthJA
-
-
-
35
62
-
Soldering temperature, reflow soldering, MSL1
1.6 mm (0.063 in.) from case for 10s4)
Tsold - - 220 °C
Electrical Characteristics, at Tj=25°C unless otherwise specified
Parameter Symbol Conditions Values Unit
min. typ. max.
Drain-source breakdown voltage V(BR)DSS VGS=0V, ID=0.25mA 500 - - V
Drain-Source avalanche
breakdown voltage
V(BR)DS VGS=0V, ID=11.6A - 600 -
Gate threshold voltage VGS(th) ID=500µA, VGS=VDS 2.1 3 3.9
Zero gate voltage drain current IDSS VDS=500V, VGS=0V,
Tj=25°C
Tj=150°C
-
-
0.1
-
1
100
µA
Gate-source leakage current IGSS VGS=20V, VDS=0V - - 100 nA
Drain-source on-state resistance RDS(on) VGS=10V, ID=7A
Tj=25°C
Tj=150°C
-
-
0.34
0.92
0.38
-
Ω
Gate input resistance RGf=1MHz, open drain - 1.4 -
2005-02-07Rev. 2.2Page 3
SPB12N50C3
Electrical Characteristics, at T
j
= 25 °C, unless otherwise specified
Parameter Symbol Conditions Values Unit
min. typ. max.
Characteristics
Transconductance gfs VDS≥2*ID*RDS(on)max,
ID=7A
- 8 - S
Input capacitance Ciss VGS=0V, VDS=25V,
f=1MHz
- 1200 - pF
Output capacitance Coss - 400 -
Reverse transfer capacitance Crss - 30 -
Effective output capacitance,5)
energy related
Co(er) VGS=0V,
VDS=0V to 400V
- 45 -
Effective output capacitance,6)
time related
Co(tr) - 92 -
Turn-on delay time td(on) VDD=380V, VGS=0/10V,
ID=11.6A, RG=6.8Ω
- 10 - ns
Rise time tr- 8 -
Turn-off delay time td(off) - 45 -
Fall time tf- 8 -
Gate Charge Characteristics
Gate to source charge Qgs VDD=400V, ID=11.6A - 5 - nC
Gate to drain charge Qgd - 26 -
Gate charge total QgVDD=400V, ID=11.6A,
VGS=0 to 10V
- 49 -
Gate plateau voltage V(plateau) VDD=400V, ID=11.6A - 5 - V
1Limited only by maximum temperature
2Repetitve avalanche causes additional power losses that can be calculated as PAV=EAR*f.
3Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (one layer, 70 µm thick) copper area for drain
connection. PCB is vertical without blown air.
4Soldering temperature for TO-263: 220°C, reflow
5Co(er) is a fixed capacitance that gives the same stored energy as Coss while VDS is rising from 0 to 80% VDSS.
6Co(tr) is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS.
2005-02-07Rev. 2.2Page 4
SPB12N50C3
Electrical Characteristics
Parameter Symbol Conditions Values Unit
min. typ. max.
Inverse diode continuous
forward current
ISTC=25°C - - 11.6 A
Inverse diode direct current,
pulsed
ISM - - 34.8
Inverse diode forward voltage VSD VGS=0V, IF=IS- 1 1.2 V
Reverse recovery time trr VR=400V, IF=IS ,
diF/dt=100A/µs
- 380 - ns
Reverse recovery charge Qrr - 5.5 - µC
Peak reverse recovery current Irrm - 38 - A
Peak rate of fall of reverse
recovery current
dirr/dt Tj=25°C - 1100 - A/µs
Typical Transient Thermal Characteristics
Symbol Value Unit Symbol Value Unit
SPB SPB
Rth1 0.015 K/W Cth1 0.0001878 Ws/K
Rth2 0.03 Cth2 0.0007106
Rth3 0.056 Cth3 0.000988
Rth4 0.197 Cth4 0.002791
Rth5 0.216 Cth5 0.007285
Rth6 0.083 Cth6 0.063
External Heatsink
TjTcase
Tamb
Cth1 Cth2
Rth1 Rth,n
Cth,n
Ptot (t)
2005-02-07Rev. 2.2Page 5
SPB12N50C3
1 Power dissipation
Ptot = f(TC)
0 20 40 60 80 100 120 °C 160
TC
0
10
20
30
40
50
60
70
80
90
100
110
120
W
140
SPP12N50C3
Ptot
2 Power dissipation FullPAK
Ptot = f(TC)
0 20 40 60 80 100 120 °C 160
TC
0
4
8
12
16
20
24
28
W
36
Ptot
3 Safe operating area
ID= f ( VDS )
parameter : D = 0 , TC=25°C
10 010 110 210 3
V
VDS
-2
10
-1
10
0
10
1
10
2
10
A
ID
tp = 0.001 ms
tp = 0.01 ms
tp = 0.1 ms
tp = 1 ms
DC
4 Safe operating area FullPAK
ID = f (VDS)
parameter: D = 0, TC = 25°C
10 010 110 210 3
V
VDS
-2
10
-1
10
0
10
1
10
2
10
A
ID
tp = 0.001 ms
tp = 0.01 ms
tp = 0.1 ms
tp = 1 ms
tp = 10 ms
DC
2005-02-07Rev. 2.2Page 6
SPB12N50C3
5 Transient thermal impedance
ZthJC = f(tp)
parameter: D=tp/T
10 -7 10 -6 10 -5 10 -4 10 -3 10 -1
s
tp
-4
10
-3
10
-2
10
-1
10
0
10
1
10
K/W
ZthJC
D = 0.5
D = 0.2
D = 0.1
D = 0.05
D = 0.02
D = 0.01
single pulse
6 Transient thermal impedance FullPAK
ZthJC = f(tp)
parameter: D = tp/t
10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 1
s
tp
-4
10
-3
10
-2
10
-1
10
0
10
1
10
K/W
ZthJC
D = 0.5
D = 0.2
D = 0.1
D = 0.05
D = 0.02
D = 0.01
single pulse
7 Typ. output characteristic
ID = f (VDS); Tj=25°C
parameter: tp= 10 µs, VGS
0 5 10 15 V25
VDS
0
4
8
12
16
20
24
28
32
A
40
ID
4.5V
5V
5.5V
6V
6.5V
7V
20V
10V
8V
8 Typ. output characteristic
ID = f (VDS); Tj=150°C
parameter: tp= 10 µs, VGS
0 5 10 15 V 25
VDS
0
2
4
6
8
10
12
14
16
18
A
22
ID
4V
4.5V
5V
5.5V
6V
20V
8V
7.5V
7V
2005-02-07Rev. 2.2Page 7
SPB12N50C3
9 Typ. drain-source on resistance
RDS(on)=f(ID)
parameter: Tj=150°C, VGS
0 2 4 6 8 10 12 14 16 A 20
ID
0.4
0.6
0.8
1
1.2
1.4
1.6
Ω
2
RDS(on)
4V 4.5V 5V 5.5V 6V
6.5V
8V
20V
10 Drain-source on-state resistance
RDS(on) = f(Tj)
parameter : ID = 7 A, VGS = 10 V
-60 -20 20 60 100 °C 180
Tj
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
Ω
2.1 SPP12N50C3
RDS(on)
typ
98%
11 Typ. transfer characteristics
ID= f ( VGS ); VDS≥ 2 x ID x RDS(on)max
parameter: tp = 10 µs
0 1 2 3 4 5 6 7 8 V 10
VGS
0
4
8
12
16
20
24
28
32
A
40
ID
25°C
150°C
12 Typ. gate charge
VGS =f (QGate)
parameter: ID = 11.6 A pulsed
0 10 20 30 40 50 nC 70
QGate
0
2
4
6
8
10
12
V
16 SPP12N50C3
VGS
0,8 VDS max
DS max
V
0,2
2005-02-07Rev. 2.2Page 8
SPB12N50C3
13 Forward characteristics of body diode
IF = f (VSD)
parameter: T
j
, tp= 10 µs
0 0.4 0.8 1.2 1.6 2 2.4 V3
VSD
-1
10
0
10
1
10
2
10
A
SPP12N50C3
IF
Tj = 25 °C typ
Tj = 25 °C (98%)
Tj = 150 °C typ
Tj = 150 °C (98%)
14 Avalanche SOA
IAR = f (tAR)
par.: Tj≤ 150 °C
10 -3 10 -2 10 -1 10 010 110 210 4
µs
tAR
0
1
2
3
4
5
6
7
8
9
A
11
IAR
Tj(START)=125°C
Tj(START)=25°C
15 Avalanche energy
EAS = f(Tj)
par.: ID = 5.5 A, VDD = 50 V
20 40 60 80 100 120 °C 160
Tj
0
50
100
150
200
250
mJ
350
EAS
16 Drain-source breakdown voltage
V(BR)DSS = f(Tj)
-60 -20 20 60 100 °C 180
Tj
450
460
470
480
490
500
510
520
530
540
550
560
570
V
600
SPP12N50C3
V(BR)DSS
2005-02-07Rev. 2.2Page 9
SPB12N50C3
17 Avalanche power losses
PAR = f (f )
parameter: EAR=0.6mJ
10 410 510 6
Hz
f
0
50
100
150
200
W
300
PAR
18 Typ. capacitances
C = f(VDS)
parameter: VGS=0V, f=1 MHz
0 100 200 300 V 500
VDS
-1
10
0
10
1
10
2
10
3
10
4
10
pF
C
Ciss
Coss
Crss
19 Typ. Coss stored energy
Eoss=f(VDS)
0 100 200 300 V 500
VDS
0
1
2
3
4
µJ
6
Eoss
2005-02-07Rev. 2.2Page 10
SPB12N50C3
Definition of diodes switching characteristics
2005-02-07Rev. 2.2Page 11
SPB12N50C3
P-TO-263-3-2 (D2-PAK)
2005-02-07Rev. 2.2Page 12
SPB12N50C3
Published by
Infineon Technologies AG,
Bereichs Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 1999
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device
or system Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.