19-117/T1D-AP2Q2QY/3T - EVERLIGHT ELECTRONICS

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Technical Data Sheet

0603 Package Chip LED (0.4mm Height)

19-117/T1D-AP2Q2QY/3T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․ESD protection.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 19-117 SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Part No. Material Emitted Color Lens Color

19-117/T1D-AP2Q2QY/3T InGaN Pure White Yellow Diffused

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Package Outline Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Peak Forward Current

(Duty 1/10 @1KHz) IFP 100 mA

Power Dissipation Pd 110 mW

Electrostatic Discharge

(HBM) ESD 2000 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol

Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

.

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv 57.0 ----- 112.0 mcd

Viewing Angle 2θ1/2 ----- 130 ----- deg

Forward Voltage VF 2.70 ----- 3.20 V

IF=5mA

Bin Range Of Luminous Intensity & Forward Voltage

Symbol Bin Code Min. Max. Unit Condition

P2 57.0 72.0

Q1 72.0 90.0

IV

Q2 90.0 112

mcd

29 2.7 2.8

30 2.8 2.9

31 2.9 3.0

32 3.0 3.1

VF

33 3.1 3.2

V

IF=5mA

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Forward Voltage ±0.05V

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Chromaticity Coordinates Specifications for Bin Grading

Group Bin Code CIE_x CIE_y Condition

0.274 0.226

0.274 0.258

0.294 0.286

1

0.294 0.254

0.274 0.258

0.274 0.291

0.294 0.319

2

0.294 0.286

0.294 0.254

0.294 0.286

0.314 0.315

3

0.314 0.282

0.294 0.286

0.294 0.319

0.314 0.347

4

0.314 0.315

0.314 0.282

0.314 0.315

0.334 0.343

5

0.334 0.311

0.314 0.315

0.314 0.347

0.334 0.376

A

6

0.334 0.343

IF= 5mA

Notes:

1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).

2.The products are sensitive to static electricity and care must be fully taken when

handling products.

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

CIE Chromaticity Diagram

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Label explanation

CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates Rank REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm , Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles

Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260 ±5 ℃℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100 15min℃

∫ 5 min

L : -40 15min℃

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100 5min℃

∫ 10 sec

L : -10 5min℃

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85 / 85%RH℃ 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 11 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

19-117/T1D-AP2Q2QY/3T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 12 of 12

Device No:DSE-197-W21 Prepared date: 23-Jan-2007 Prepared by: Zhifang Pan

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,

a double-head soldering iron should be used (as below figure). It should be confirmed beforehand

whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com