Light Touch Switches/EVPBA 3.0 mmx2.6 mm 2 terminals SMD Light Touch Switches Type: EVPBA Features External dimensions: 3.0 mmx2.6 mm, Height 0.58 mm High operability Equipped with an actuator (push plate) Recommended Applications Operation switches for portable electronic equipment (Mobile phone, Portable audio) Explanation of Part Numbers 1 2 3 Product Code 4 5 6 7 8 9 Type Specifications Type Snap action/Push-on type SPST 10 A 2 V DC to 20 mA 15 V DC (Resistive load) Rating Contact Resistance Electrical 500 m max. Insulation Resistance 50 M min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing Mechanical Endurance 10 ms max. (ON, OFF) Operating Force 1.8 N Travel 0.13 mm Operating Life 300,000 cycles min. Operating Temperature -40 C to +85 C -40 C to +85 C (Bulk) -20 C to +60 C (Taping) Storage Temperature Minimum Quantity/Packing Unit 20,000 pcs. Embossed Taping (Reel Pack) 100,000 pcs. Quantity/Carton Note: Non washable Designandspecificationsareeachsubjecttochangewithoutnotice.Askfactoryforthecurrenttechnicalspecificationsbeforepurchaseand/oruse. Shouldasafetyconcernariseregardingthisproduct,pleasebesuretocontactusimmediately. LQGXVWULDOSDQDVRQLFFRPDFH 1 (c) PanasonicCorporation2019 ANCTB16E201903-Fd Light Touch Switches/EVPBA Dimensions in mm (not to scale) EVPBA (Embossed Taping) General dimension tolerance : 0.1 ( )dimensions are reference dimensions. 1.3 2.6 (Without the remainder of the gate) 3.5 3 A' A (0.7) (Push plate) A A' (0.04) 0.35 0.38 0.58 Circuit diagram A A' 2- 1.5 3.8 2.6 Land pattern plan Soldering thicknes t=0.080.01 The opening ratio of the solder stencil to a land pattern shall be 70% If you design different stencil mask and land pattern, or apply different soldering thickness compared with our recommended pattern as described above, please ask us in advance. Part Numbers Operating Force Height Operating Life EVPBABA3A 1.8 N 0.58 mm 300,000 cycles Designandspecificationsareeachsubjecttochangewithoutnotice.Askfactoryforthecurrenttechnicalspecificationsbeforepurchaseand/oruse. Shouldasafetyconcernariseregardingthisproduct,pleasebesuretocontactusimmediately. PanasonicCorporationElectromechanicalControlBusinessDivision industrial.panasonic.com/ac/e/ 2 (c) PanasonicCorporation2019 ANCTB16E201903-Fd Light Touch Switches/EVPBA Recommended Reflow Soldering Conditions Operation Top (C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 9030 4010 Soldering Time (s) Reflow temperature may vary by location even in the same reflow condition. Please check the reflow temperature at terminals and at the top of a switch to make sure the both temperatures are withiin the specification. If even one of them is out of the specifi cations, please adjust. Embossed Carrier Taping Tape width=12.0 mm (A=12.0 mm) I F E G J B D H K A C Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. t Tape running direction Part No. Height EVPBA 0.58 A B C 12.00.3 1.750.10 5.50.1 D E F 4.00.1 4.00.1 2.00.1 G H I J K 1.50.3 3.750.20 2.850.20 0.80.2 (10.25) Unit: mm t 0.3 +0.15 -0.1 Designandspecificationsareeachsubjecttochangewithoutnotice.Askfactoryforthecurrenttechnicalspecificationsbeforepurchaseand/oruse. Shouldasafetyconcernariseregardingthisproduct,pleasebesuretocontactusimmediately. PanasonicCorporationElectromechanicalControlBusinessDivision industrial.panasonic.com/ac/e/ 3 (c) PanasonicCorporation2019 ANCTB16E201903-Fd Requests to customers Please refer to "the latest product specifications" when designing your product. Requests to customers : https://industrial.panasonic.com/ac/e/salespolicies/ Safety Precautions When using our products, no matter what sort of equipment they might be used for, be sure to confirm the applications and environmental conditions with our specifications in advance. Please contact .......... Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industrial.panasonic.com/ac/e/ (c)Panasonic Corporation 2019 ANCTB16E-1 201903-Fd Specifications are subject to change without notice.