UDA1325 config map 2 - Philips Semiconductors / NXP Semiconductors

International Technology Centre Leuven

Addendum Change Request 10

UDA 1325 USB_CODEC

PLR-10240

Pg. 1/7

Editor: H e rman D’HAESELEER Version:

\\BESLV6\PRO-ITCL\20249.1325\SW\TechnicalSpecifications\PLR101240.doc

PVCS $Revision:: 1.22 $

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name : Herman

D’HAESELEER 7 193 - 1 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND

Config map 2

UDA 1325

SIGNATURES FOR AGREEMENT

Function Name Date Signature

FRS: UDA 1335 USB_CODEC Version: Pg. 2/7

PLR-10240

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name: Herman

D’HAESELEER 7 193 - 2 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND

4.6.2 General descriptors

The general USB (CODEC) de scriptors describe in general terms the capabilities of the device, like; ‘how many

configurations it supports’, ‘how many interfaces’ etc. A detailed description of these descriptors can be found in

the USB specification [USBSpec]. It layouts a framework to which the additional class specific descriptors can be

integrated. (See paragraph ‘Descriptors’ of the [USBSpec]).

This USB_CODEC supports 4 ‘different’ interfaces. The control, the AudioStreaming out, the AudioStreaming

in and the human interface (HID) are declared in the Configuration Descriptor. The audio interfaces support

different audio topologies see paragraph 4.6.3.1 Audio function topology. It is possible to switch the HID

interface ON or OFF.

Each internal and the external hardware selectable configuration-map has its own Descriptor Map, depending of

the selected Audio topology and the supported HID interface. At start-up time only one Descriptor map can be

implicit selected with a predefined combination of selection diodes. This selection will be discussed in paragraph

4.10.

For each descriptor a column is added to indicate if it is allowed to change the value in the external

configuration-map. The described descriptors are these of configuration-map 1

Fixed Device Descriptor Value hex

XbLength 12

XbDescriptorType 01 DEVICE descriptor Type

bcdUSB 0100 Version USB 1.00 in BCD

XcDeviceClass 00 each interface specifies its own class information

XcDeviceSubClass 00 0 because cDeviceClass is 0

XcDeviceProtocol 00 no class specific protocols on a device basis

XbMaxPacketSize0 08 The amount of bytes/packet on the control endpoint is limited by the PSIE

MMU hardware to 8 bytes/packet.

idVendor 05FC Harman = FC05

idProduct 0101 Product 1 version 1 USB CODEC [USBPROD]

bcdDevice 0100 Device Release Number Mode 1.0 or Actual Software version Nb

iManufactor 01 Index to stringdescriptor manufacturer

iProduct 02 Index to stringdescriptor product

iSerialNumber 00 Index to stringdescriptor serial number

XbNumConfigurations 01 Number of possible configurations at a time

Table 4-3 Standard Device Descriptor

FRS: UDA 1335 USB_CODEC Version: Pg. 3/7

PLR-10240

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name: Herman

D’HAESELEER 7 193 - 3 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND

4.6.4.1 ReportDescriptor’s Main Item: Input and Output

Fixed Name ReportDescriptor line

Main Item: Input hex

Usage Page(Consumer Devices) 050C  Header Collection

Usage (Consumer Control) 0901  Consumer Controls

XCollection(Application) A101

XLogical Minimum(0) 1500  global remain true until defined otherwise

XLogical Maximum(1) 2501 

XReport Count (6) 9506 Create 6 one bits reports

xReport Size (1) 7501

Usage (Unassigned) 0900 HID In 1 not assigned

Usage (Unassigned) 0900 HID In 2 not assigned

Usage (Volume Up) 09E9 HID In 3 Volume Up

Usage (Volume Down) 09EA HID In 4 VolumeDown

Usage (Mute) 09E2 HID In 5 Mute

Usage (Unassigned) 0900 HID In 6 not assigned

xInput (Data,Var,Abs,Null) 8142 .

xReport Count (1) 9501 Padding with one two bit report

xReport Size (2) 7502

xInput (Constant) 8101 Constants.

xReport Count (3) 9503 Create 3 one bit report fields global items

xReport Size (1) 7501

Usage (Unassigned) 0900 HID Device output 1 not implemented

Usage (Unassigned) 0900 HID device output 2 not implemented

Usage (Unassigned) 0900 HID device output 3 not implemented

xOutput (Data, Variable, Relative) 9106 Add fields to the Output reporter; 1 out bits.

xReport Count (1) 9501 Create 1 five bit report fields

xReport Size (5) 7505

xOutput (Constant) 9103 Padding constants

xEnd Collection C0

Table 4-601 USBCODECIC Reportdescriptor with 6 inputs and 3 outputs.

FRS: UDA 1335 USB_CODEC Version: Pg. 4/7

PLR-10240

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name: Herman

D’HAESELEER 7 193 - 4 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND

4.10.2 Configuration Map 2

Main Features:

• Audio Playback configuration with No DBB and Clipping prevention on (no distortion)

• Audio Input configuration Analog Input

• With HID, external port expander

• Mute function on codec

• Volume Up and Down and mute

• Self powered

• Powerup time for amp = 300mSec (x time = 0Fh)

• Time between play and mute = 5Sec (y time = 5)

• go into standby after 2 min (z time = 18h)

• Default volume = -10dB

• Vendor ID = Harman

• Manufactor = Harman

• Product = Harman USB Digital Speaker System

• Gain setting for mike = 0dB

Value

Hex Affects Comment

00 Clockshop control Register 1000

00 Rstgen and PLL control Register 1001

00 Power Control Register 1003

8B ASR _UDAO Reg. Register 2000

09 PGA control Anal. Input Terminal 1 Register 800

09 PGA control Anal. Input Terminal 2 Only for Interface 2 Analog configuration

5C ADIF Control Register 801

60 ADAC feature setting (Reg0) via L3

90 ADAC lock mode (Reg1)via L3

D7 I/O-Selection register

bit 7 : Clipping preventio n

bit 6 : Expander

bit 5 : Selector o utp ut

bit 4 : Mute/Standb y (Expander)

bit 3 : Mute/Standby (Codec)

bit 2 : outp ut pin 3

bit 1 : outp ut pin 2

bit 0 : outp ut pin 1

1 = Clipping prevention on

1 = external I2C expander used

0 = normal logic for outputs

1 = Standby

0 = Mute

1 = Inverted logic for outputpin 3

1 = Inverted logic for outputpin 2

1 = Inverted logic for outputpin 1

00 Output pin function 1 Functions are available if declared in ADC

0 = Mute LED according Mute function in ADC

1 = DBB LED according BB function in ADC

01 Output pin function 2 Functions are available if declared in ADC

0 = Mute LED according Mute function in ADC

1 = DBB LED according BB function in ADC

00 Output pin function 3 Functions are available if declared in ADC

0 = Mute LED according Mute function in ADC

1 = DBB LED according BB function in ADC

A1 IIS selector

bit 7 : Output I2S

bit 6 : Output I2S 4 or 6 pins

bit 5 : HID

bit 4 :

bit 3 : Input I2S

bit 2 :

1 = 4 pins I2S

1 = HID included

1 = input configuration 1

FRS: UDA 1335 USB_CODEC Version: Pg. 5/7

PLR-10240

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name: Herman

D’HAESELEER 7 193 - 5 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND

Value

Hex Affects Comment

bit 1 :

bit 0 :

0F X rise Time power Amp Steps of 20 msec : 300 msec

05 Y Time between Mute and Play steps of 1 sec: 5 sec

18 Z Time between Mute an Standby steps of 5 sec: 2 min

00 Selector preferred state 0 = Anal. Input Terminal 1 Mike

00 DBB value (dB) must be pair Will be used in according with Feature Unit

descriptor

0A Volume Default init Attenuation Volume in 1 dB steps

-32 dB

00 Maximum distortion in dB

80BB

00 Sample fre quency :

LSB

Mid

MSB

48 kHz

0030 pointer to the Device Descriptor 0x0012 bytes long

0045 pointer to the Configuration Descriptor 0x035A bytes long

0210 pointer to the length of HID Report

Descriptor 0x0035 bytes long

0003 Number of String pointers N strings as mentioned in the descriptors < 33

025E Pointer to 0 String According the 0 string

0260 Pointer to first String According first string in descriptor

0290 Pointer to Second String According second string in descriptor

etc.

Device Descriptor

0x12 bLength

0x 01 bDescriptorType

0x 0100 bcdUSB

0x 00 cDeviceClass

etc.

Descriptors are in Little Endian

Table 4-3 Standard Device Descriptor

etc.

Configuration Descripto r

Including ADC and HID Configuration descriptor according topology 2

HID Descriptors

Table 4 – 57 Standard Interface descriptor +

Table 4 – 59 HID Endpoint Descriptor +

Table 4 – 58 HID Descriptor

3500 Length of HID Report Descriptor

LSB

MSB

etc

HID Report Descriptor

0x 050CUsage page (Consumer Dev)

0x0901 Usage(Consumer Control)

HID Report Descriptor according the new descriptor in this

document (Table 4 – 60)

Zero string

0x04 String 0 length

0x03 Descriptor Type

Supported Language

0409 English

0E String 1

0x0E String 1 length String Ma nufacturer : Harman

FRS: UDA 1335 USB_CODEC Version: Pg. 6/7

PLR-10240

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name: Herman

D’HAESELEER 7 193 - 6 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND

Value

Hex Affects Comment

etc.

0x03 Descriptor Type

etc.

String 2

0x34 String 1 length

0x03 Descriptor Type

etc.

String Produc t String :

Harman USB Speaker System

Table 4-119 USB_CODEC Configuration map 0

FRS: UDA 1335 USB_CODEC Version: Pg. 7/7

PLR-10240

4AE400 FRS: UDA 1335 USB_CODEC .... ... .....

n.a.

Name: Herman

D’HAESELEER 7 193 - 7 10 A4

PL Or. date : 29-07-97  Property of PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN NEDERLAND