SPECIFICATION
LPS-75-3.3
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
SAFETY STANDARDS
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
REMOTEON/OFF
DIMENSION
OTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
FUNCTION
ACCURRENT (Typ.)
3.3V
15A
0~16.5A
49.5W
54.45W
80mVp-p
3~3.5V
3.0%
1.0%
3.0%
100ms,35ms/230VAC100ms,35ms/115VACatfullload
60ms/230VAC12ms/115VACatfullload
90~264VAC127~370VDC
47~63Hz
69%
1.9A/115VAC1.1A/230VAC
COLDSTART 18A/115VAC36A/230VAC
<1mA /240VAC
115~150% ratedoutputpower
3.8~4.45V 5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V 57.6~67.2V
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
UL60950-1, TUVEN60950-1approved
CompliancetoEN55011,EN55022(CISPR22)ClassB, EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2(EN50082-2),heavyindustrylevel,criteria A
-20~+70 (Referto"DeratingCurve")
20~90%RHnon-condensing
-20~+85 ,10~95%RH
0.04%/ (0~50
10~500Hz,2G10min./1cycle,periodfor60min. eachalongX, Y,Zaxes
355Khrsmin.MIL-HDBK-217F(25 )
RC+/RC-:0~0.8Vpoweron;4~10Vpoweroff
222*55*30mm(L*W*H)
0.3Kg;48pcs/15.6Kg/1.12CUFT
77% 80% 81% 83% 83%
3.0% 2.0% 2.0% 1.0% 1.0%
1.0% 1.0% 1.0% 1.0% 1.0%
3.0% 2.0% 2.0% 2.0% 2.0%
80mVp-p
4.75~5.5V
100mVp-p
11~13.5V
100mVp-p
13.5~16.5V
120mVp-p
22~27V
120mVp-p
45~54V
5V
15A
0~16.5A
75W
82.5W
12V
6.2A
0~6.8A
74.4W
81.6W
15V
5A
0~5.5A
75W
82.5W
24V
3.2A
0~3.5A
76.8W
84W
48V
1.56A
0~1.7A
75W
74.88W
LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48
FileName:LPS-75-SPEC2011-08-10
75WSingleOutputSwitchingPowerSupply
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
PWM control and regulated
Small and compact size
Built-in remote ON-OFF control
LED indicator for power on
100% full load burn-in test
2 years warranty
Features :
LPS-75 series
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
PEAKLOAD(10sec.) Note.4
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC/25 /70%RH
ENVIRONMENT
SAFETY &
EMC
(Note5)
PROTECTION
EMCIMMUNITY
EMCEMISSION