DO NOT
SCALE FROM
THIS PRINT
.485 12.32
REF
.770 19.56
REF
"A"
"A"
PMSSX-05-XX-XX-XX.XX-S SHOWN
FIG. 1
IPBD-XX-S
(No OF POS x .165[4.19])
+ .040[1.02]) REF
.213
REF
5.41.313
REF
7.95
01
02
XX.XX
(SEE NOTE 12)
SECTION "A"-"A"
DWCX-XX-XX-XXX
(SEE TABLE 1)
C1
C-169-XX-XX-T
(SEE TABLE 1)
No OF POSITIONS
-02 THRU -10
-S: SINGLE END
-D: DOUBLE END
(MUST CHOOSE LUS, LDS, MUS,
OR MDS OPTIONS)
LEAD STYLE
-SP: STANDARD POWER (C-169-XX-SP-T)
-HP: HIGH POWER (C-169-XX-HP-T)
(SEE NOTE 13)
WIRE GAUGE (AWG)
[SEE TABLE 1]
PVC: -16, -18, -206, -203, -22, -24
FEP: -18, -24
END OPTION
OPTION
SPECIFY IN INCHES (03.00 INCH MINIMUM)
[USE DWCX-XX-XX-XXX]
ASSEMBLED LENGTH
PMSSX-XX-XXXX-XX-XX.XX-X-XXX
WIRE COLOR
LEAVE BLANK FOR ALL BLACK WIRE
C: COLOR CODED WIRE
(SEE COLOR SEQUENCE TABLE, SHEET 2)
(NOT AVAILABLE WITH FEP OPTION)
FEP CABLE OPTION
SINGLE
XX.XX
(SEE NOTE 12)
FIG. 2
PMSSX-05-XX-XX-XX.XX-D-LUS SHOWN
C2
IPBD-XX-S
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1]
C
C3
-T: FEP INSULATION
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
-M: METAL LATCH (USE IPBD-XX-D-M)
(LEAVE BLANK FOR PLASTIC)
DOUBLE
-LUS: PLASTIC LATCH UP, STRAIGHT
(SEE FIG. 3, SHEET 2)
-LDS: PLASTIC LATCH DOWN, STRAIGHT
(SEE FIG. 4, SHEET 2)
-MUS: METAL LATCH UP, STRAIGHT
-MDS: METAL LATCH DOWN, STRAIGHT
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.165[4.19] SOCKET DISCREET CABLE ASSEMBLY
BY:
PMSSX-XX-XXXX-XX-XX.XX-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
04/14/2005
3
1
SHEET SCALE: 1:1
HOUSING: VALOX 457, COLOR: NATURAL
CONTACT: PHOS BRONZE
CABLE; INSULATION: SEE CALLOUT
WIRE: SEE CABLE PRINT
(NOT LEAD FREE)
F:\DWG\MISC\MKTG\PMSSX-XX-XXXX-XX-XX.XX-X-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .003[.08] MAX.
3. PARTS TO BE MOLDED TO POSITION.
4. MINIMUM PULLOUT FORCE: 5 lbs[22.24 N].
5. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE.
6. ALL FINISHED GOODS ARE TO BE LAYER PACKAGED IN SHIPPING.
7. ONLY AVAILABLE IN TIN PLATING
.
8. ALL PARTS TO PASS ELECTRICAL TEST UPON ASSEMBLY (INCLUDING HI-POT
TESTAT 1000 VOLTS DC). AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
9. APPLICATIONS INVOLVING SEVERE BENDING REQUIRE 6" MINIMUM
CABLE LENGTH.
10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, AND TOOLING.
11. NOTE DELETED.
12. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL
BE ±.125[3.18]. FOR OTHER LENGTHS, TOLERANCES SHALL BE ±2%.
13. AVAILABLE TO EXISTING CUSTOMERS ONLY. DO NOT DESIGN IN AS OF REVISION H.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION R
-LUS
LATCH-
END 1
LATCH-
END 2
[LATCH UP]
PMSSX-05-XX-XX-XX.XX-D-LUS SHOWN
FIG. 3
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1]
-LDS
LATCH-
END 1
LATCH-
END 2
[LATCH DOWN]
[DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1]
PMSSX-05-XX-XX-XX.XX-D-LDS SHOWN
FIG. 4
SHEET OF
.165[4.19] SOCKET DISCREET CABLE ASSEMBLY
BY:
PMSSX-XX-XXXX-XX-XX.XX-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
04/14/2005
3
2
SHEET SCALE: 0.875:1
REVISION R
F:\DWG\MISC\MKTG\PMSSX-XX-XXXX-XX-XX.XX-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.618 15.70
REF
LTC-14-01-N
IPBD-XX-S-R
.223 5.66
.125
REF
3.18
FIG. 5
(PMSSX-08-XXX-XX-XX.XX-S-M SHOWN)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
SHEET OF
.165[4.19] SOCKET DISCREET CABLE ASSEMBLY
BY:
PMSSX-XX-XXXX-XX-XX.XX-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
04/14/2005
3
3
SHEET SCALE: 1:1
REVISION R
F:\DWG\MISC\MKTG\PMSSX-XX-XXXX-XX-XX.XX-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
