Silizium-PIN-Fotodiode Silicon PIN Photodiode Lead (Pb) Free Product - RoHS Compliant SFH 203 P SFH 203 PFA SFH 203 P SFH 203 PFA Wesentliche Merkmale Features * Wellenlangenbereich (S10%) 400nm bis 1100nm (SFH 203 P) und 750nm bis 1100nm (SFH 203 PFA) * Kurze Schaltzeit (typ. 5 ns) * 5 mm-Plastikbauform im LED-Gehause * Wavelength range (S10%) 400 nm to 1100 nm (SFH 203 P) and 750nm to 1100nm (SFH 203 PFA) * Short switching time (typ. 5 ns) * 5 mm LED plastic package Anwendungen Applications * Industrieelektronik * Messen/Steuern/Regeln" * Schnelle Lichtschranken * Industrial electronics * For control and drive circuits * High speed photointerrupters Typ Type Bestellnummer Fotostrom, Ev=1000 lx, standard light A, VR = 5 V (SFH 203 P) Ordering Code Photocurrent, Ee=1 mW/cm2, = 870nm, VR = 5 V(SFH 203 PFA) Ip (A) SFH 203 P Q62702P0942 9.5 (5.0) SFH 203 PFA Q62702P0947 6.2 (3.6) 2011-10-20 1 SFH 203 P, SFH 203 PFA Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Sperrspannung Reverse voltage VR VR (t < 2 min) 20 50 V V Verlustleistung Total power dissipation Ptot 150 mW Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit SFH 203 P SFH 203 PFA IP 9.5 (5.0) - A IP - 6.2 (3.6) A Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 850 900 nm Spektraler Bereich der Fotoempfindlichkeit S = 10 % von Smax Spectral range of sensitivity S = 10 % of Smax 400 ... 1100 750 ... 1100 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 1 1 mm2 1x1 1x1 mm x mm Fotostrom Photocurrent VR = 5 V, Normlicht/standard light A, T = 2856 K, EV = 1000 lx VR = 5 V, = 870 nm, Ee = 1 mW/cm2 Abmessung der bestrahlungsempfindlichen Flache L x B Dimensions of radiant sensitive area LxW Halbwinkel Half angle 75 75 Grad deg. Dunkelstrom, VR = 20 V Dark current IR 1 ( 10) 1 ( 10) nA Spektrale Fotoempfindlichkeit, = 850 nm Spectral sensitivity S 0.62 0.59 A/W Quantenausbeute, = 850 nm Quantum yield 0.89 0.86 Electrons Photon 2011-10-20 2 SFH 203 P, SFH 203 PFA Kennwerte (TA = 25 C) Characteristics (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value SFH 203 P SFH 203 PFA Einheit Unit Leerlaufspannung Open-circuit voltage Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 870 nm VO 350 ( 300) - mV VO - 300 ( 250) mV Kurzschlustrom Short-circuit current Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 870 nm ISC 9.3 - A ISC - 3.0 A Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 ; VR = 20 V; = 850 nm; Ip = 800 A tr , tf 5 5 ns Durchlaspannung, IF = 80 mA, E = 0 Forward voltage VF 1.3 1.3 V Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 11 11 pF Temperaturkoeffizient von VO Temperature coefficient of VO TCV - 2.6 - 2.6 mV/K Temperaturkoeffizient von ISC Temperature coefficient of ISC Normlicht/standard light A = 870 nm TCI Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 20 V, = 850 nm Nachweisgrenze, VR = 20 V, = 850 nm Detection limit 2011-10-20 3 %/K 0.18 - - 0.1 NEP 2.9 x 10- 14 2.9 x 10- 14 D* 3.5 x 1012 3.5 x 1012 W -----------Hz cm x Hz -------------------------W SFH 203 P, SFH 203 PFA Relative Spectral Sensitivity SFH 203 P, Srel = f () Relative Spectr. Sensitivity SFH 203 PFA, Srel = f () OHF01129 100 OHF01773 100 S rel % S rel % 80 80 Total Power Dissipation Ptot = f (TA) OHF00394 160 mW Ptot 140 120 60 100 60 80 40 40 20 20 60 40 20 0 400 600 800 0 400 1000 nm 1200 P 800 OHF01765 10 4 mV VO 10 1 Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) SFH 203 P P OHF01025 10 2 A 10 3 mV VO VO 10 1 10 0 10 2 20 40 60 80 C 100 TA Dark Current IR = f (VR), E = 0 R OHF01026 10 4 pA 10 0 -1 10 10 1 10 2 W/cm 2 10 3 10 1 10 2 10 0 10 3 lx 10 4 EV 10 1 1 10 0 10 4 10 -1 10 0 10 1 10 2 Ee Directional Characteristics 0 10 20 V VR Capacitance C = f (VR), f = 1 MHz, E = 0 Srel = f () 2011-10-20 10 2 P P 10 -2 10 0 0 10 3 VO 10 0 1000 nm 1200 Photocurrent IP = f (Ee), VR = 5 V Open-Circuit Voltage VO = f (Ee) SFH 203 PFA 10 2 A 600 4 30 SFH 203 P, SFH 203 PFA Mazeichnung Package Outlines 1.0 (0.039) 0.5 (0.020) 2.54 (0.100) spacing 0.6 (0.024) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) o5.1 (0.201) o4.8 (0.189) Area not flat 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) Cathode 5.9 (0.232) 5.5 (0.217) 0.6 (0.024) 0.4 (0.016) 3.85 (0.152) 3.35 (0.132) 5.0 (0.197) 4.2 (0.165) Chip position GEOY6648 Mae in mm (inch) / Dimensions in mm (inch). Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2011-10-20 5 s 250 SFH 203 P, SFH 203 PFA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. Attention please!2011-10-20The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2011-10-20 6