LAA100 DUAL POLE OptoMOS(R) Relay Load Voltage Load Current Max RON LAA100 350 120 25 Description LAA100 is a 350V, 120mA, 25 2-Form-A relay. It features improved on-resistance. Current limiting version is available ("L" suffix). Units V mA Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # LAA100 LAA100P LAA100PTR LAA100S LAA100STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration LAA100/LAA100L Pinout AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-LAA100-R1 www.clare.com TOFF 1 LAA100 Absolute Maximum Ratings (@ 25 C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V - - 8002 mW Total Power Dissipation Isolation Voltage Input to Output 3750 - - VRMS Operational Temperature -40 - +85 C Storage Temperature -40 - +125 C - - +260 +220 C C Soldering Temperature DIP Package Flatpack/Surface Mount Pkg (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units - VL - - 350 V Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration - IL - - 120 mA 10ms ILPK - - 350 mA AC/DC Configuration IL=120mA RON - - 25 Off-State Leakage Current Peak Load Current On-Resistance VL=35OV ILEAK - - 1 A Switching Speeds Turn-On Turn-Off IF=5mA, VL=10V IF=5mA, VL=10V TON TOFF - - 5 5 ms ms Output Capacitance 50V; f=1MHz COUT - 35 - pF - - - 3 - pF IL=120mA IF 5 - 50 mA Capacitance Input to Output Input Characteristics @ 25C Input Control Current - IF 0.4 0.7 - mA IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 A Input Dropout Current Input Voltage Drop 2 www.clare.com Rev. 1 LAA100 PERFORMANCE DATA* Device Count (N) Device Count (N) 30 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 1.25 15 10 0 390 LAA100 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25oC) (Load Current = 120mADC) 20 20 20 10 5 Device Count (N) 25 Device Count (N) 25 15 15 10 5 0 0.65 0.70 0.75 0.80 0.85 0.90 0.60 0.65 0.70 0.75 0.80 5 100 One Pole Operating Two Poles Operating IF=10mA IF=10mA IF=5mA IF=5mA 80 60 40 0.15 0.17 -20 0 20 40 60 Temperature Turn-Off (ms) 3.000 440 2.500 Turn-On (ms) 430 420 410 400 80 100 -20 0 20 40 60 Temperature (oC) 0.008 0.006 0 120 -40 80 100 IF=10mA 2.000 1.500 1.000 -20 0 20 40 0 60 20 40 60 80 100 LAA100 Typical Turn-Off vs. Temperature (Load Current = 70mADC) IF=5mA -40 -20 Temperature (oC) 0 380 -40 0.010 (oC) 0.500 390 1.8 0.012 LAA100 Typical Turn-On vs. Temperature (Load Current = 70mADC) LAA100 Typical Blocking Voltage vs. Temperature 450 1.7 0.002 -40 0.19 1.6 0.004 80 100 120 Temperature (oC) Turn-Off (ms) 0.13 1.5 0.014 140 0 0 0.10 1.4 0.016 20 0.08 1.3 LAA100 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Leakage (A) 10 0.06 5 Turn-On (ms) 180 120 420 10 1.2 LAA100 Maximum Continuous DC Load Current vs. Temperature * Load Current (mA) 15 415 15 0.85 160 20 410 LAA100 Typical Turn-On Time (N=50 Ambient Temperature = 25oC) (Load Current = 120mADC; IF = 5mA) LED Current (mA) LAA100 Typical Turn-Off Time (N=50 Ambient Temperature = 25oC) (Load Current = 120mADC; IF = 5mA) 405 0 0.55 LED Current (mA) 25 400 Blocking Voltage (V) 25 0.60 395 On-Resistance () 0 Device Count (N) 20 13.93 14.05 14.17 14.29 14.41 14.54 14.66 LAA100 Typical IF for Switch Operation (N=50 Ambient Temperature = 25oC) (Load Current = 120mADC) Blocking Voltage (VRMS) 25 5 LED Forward Voltage Drop (V) Device Count (N) LAA100 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25oC) Device Count (N) 35 LAA100 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25oC) (Load Current = 120mADC) LAA100 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25oC) IF = 5mA 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 120 Temperature (oC) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1 www.clare.com 3 LAA100 PERFORMANCE DATA* LAA100 Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) 0.30 2.5 0.25 1.4 50mA 1.2 10mA 5mA 2.0 1.5 1.0 1.0 0.5 0.8 0 20 40 60 Temperature 80 100 0 Pulsed IL=100mA 40 60 Temperature 35 40 45 50 0 80 100 120 -40 -20 0 20 40 60 Temperature 4.0 100 Load Current (mA) 150 3.0 2.0 1.0 80 20 40 60 80 -1 0 1 -40 0.30 0.20 0.10 0.0 2 3 19.00 22.00 Ron () -20 0 25.00 20 40 60 80 100 120 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time LAA100 Steady State Performance (75oC, Still Air) (Von=3.5VCD, IL=70mA) 0.50 0.40 0.30 0.20 0.10 0.0 16.00 50 LAA100 Energy Rating Curve Proportion per Bar Proportion per Bar 0.40 45 0 LAA100 Steady State Performance (75oC, Still Air) (IL=70mA, IF=15mA) 0.50 40 1.0 Load Voltage (V) LAA100 Steady State Performance (25oC, Still Air) (IL=120mA, IF=15mA) 0.50 -2 35 Temperature (oC) 0 -3 30 2.0 100 120 -50 100 120 25 3.0 (oC) 50 Temperature (oC) 20 4.0 -150 0 15 5.0 -100 0 -20 10 LAA100 Typical IF for Switch Operation vs. Temperature (Load Current = 70mADC) LAA100 Typical Load Current vs. Load Voltage (Ambient Temperature = 25oC) IF = 5mA 5.0 -40 5 LED Forward Current (mA) IF=5mA IF=10mA (oC) LAA100 Typical IF for Switch Dropout vs. Temperature (Load Current = 70mADC) LED Current (mA) 30 10 0 20 25 15 0 0 20 20 5 -20 15 25 5 -40 10 LAA100 Typical On-Resistance vs. Temperature (Load Current = Max Rated at Temperature, Both Poles Operating; IF = 5mA, 10mA) 30 On-Resistance () On-Resistance () IF=10mA IF=5mA IF=10mA 10 5 LED Forward Current (mA) Continuous Load IL=Max Rated 15 0 120 IF=5mA 20 0.10 0.05 (oC) LAA100 Typical On-Resistance vs. Temperature (Load Current = Max Rated at Temperature, One Pole Operating; IF = 5mA, 10mA) 30 25 0.15 LED Current (mA) 0 0.20 Load Current (A) -20 Turn-Off (ms) 3.0 1.6 -40 Proportion per Bar LAA100 Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) 1.8 Turn-On (ms) LED Forward Voltage Drop (V) LAA100 Typical LED Forward Voltage Drop vs. Temperature 0.40 0.30 0.20 0.10 0.0 21.00 22.50 24.00 Ron () 25.50 3.00 6.00 9.00 12.00 15.00 Ron () *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 1 LAA100 Mechanical Dimensions 9.652 .381 (.380 .015) 8 Pin DIP Through Hole (Standard) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) 9.144 TYP. (.360) .457 .076 (.018 .003) 7.620 .127 (.300 .005) 8.077 .127 (.318 .005 ) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) 8 Pin Flatpack ("P" Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 6.350 .127 (.250 .005) 2.286 MAX. .635 .127 (.090) (.025) 9.398 .127 (.370 .005) 1.193 (.047) .457 .076 (.018 .003) .787 (.031) 9.652 .381 (.380 .015) 8 Pin DIP Surface Mount ("S" Suffix) PC Board Pattern (Top View) 2.540 .127 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 3.302 (.130) .635 TYP. (.025) 8.763 .127 (.345 .005) .203 (.008) 8.077 .127 (.318 .005) 4.445 .127 (.175 .005) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) 9.525 .254 (.375 .010) 6.350 .127 (.250 .005) .254 TYP. (.010) (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 1.498 .127 (.059 .005) Dimensions mm (inches) Rev. 1 www.clare.com 5 LAA100 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 16.002 .305 (.630 .012) 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier .050R TYP. Embossment 11.988 .102 (.472 .004) 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Dimensions mm (inches) 6 www.clare.com Rev. 1 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LAA100-R1.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02