PhotoMOS RELAYS RF (Radio Frequency) Type [1-Channel (Form A) Type] FEATURES 8.80.05 .346.002 1. High frequency characteristics with low capacitance between output terminals Low capacitance: Typ. 5 pF (between output terminals) Isolation loss: 40 dB or more (at 1 MHz) 2. High sensitivity, high speed response Controls load current of 0.12 A (max.), with input current of 5 mA. Operate time is 100 s (Typical) 3. Low-level off state leakage current PhotoMOS AQV22 types exhibit an OFF state leakage current in the order of 100 picoamperes at a load voltage of 80 V compared with several milliamperes in solid-state relay. 6.40.05 .252.002 3.90.2 .154.008 6.40.05 .252.002 3.60.2 .142.008 8.80.05 .346.002 mm inch 4. Controls low-level analog signals PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 5. Low terminal electromotive force (Approx. 1 mV) 6. Small LED voltage drop on input side (Max. 1.5 V) TYPICAL APPLICATIONS * Measuring devices Scanner, IC checker, Board tester * Audio visual equipment CD, VCR TYPES Output rating* Type Part No. Through hole terminal Packing quantity Surface-mount terminal Load voltage Load current 40 V 80 mA AQV221 AQV221A AQV221AX AQV221AZ 80 V 50 mA AQV225 AQV225A AQV225AX AQV225AZ Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AC/DC type Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (Peak AC) Continuous load current Output Type of Symbol connection IF VR IFP Pin VL A IL B C AQV221(A) AQV225(A) 50 mA 3V 1A 75 mW f = 100 Hz, Duty factor = 0.1% 40 V 0.08 A 0.09 A 0.12 A 80 V 0.05 A 0.06 A 0.075 A 0.18 A 0.15 A Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso 230 mW 280 mW 1,500 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F Temperature limits Remarks A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperatures 541 AQV22 2. Electrical characteristics (Ambient temperature: 25C 77F) Type of Symbol connection** Item Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED turn off current LED dropout voltage IFon -- IFoff -- VF -- Ron A Ron B Ron C Cout -- Typical Maximum Typical On resistance Maximum Typical Output Maximum Turn on time* Transfer characteristics AQV225(A) 0.9 mA 3 mA 0.4 mA 0.85 mA 1.14 V*** 1.5 V Remarks IL= Max. IL= Max. IF = 5 mA 22 36 35 50 13 21 18 25 6.5 10.5 9 12.5 5.6 pF 4.8 pF IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time Maximum 8 pF IF = 0 VB = 0 f = 1 MHz Typical Maximum Typical IF = 0 VL = Max. Typical Output capacitance Off state leakage current AQV221(A) Maximum Switching speed Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/O isolation Minimum resistance ILeak -- 30 pA 10 nA Ton -- 0.10 ms 0.3 ms IF = 5 mA IL = Max. Toff -- 0.03 ms 0.1 ms IF = 5 mA IL = Max. Ciso -- 0.8 pF 1.5 pF f = 1 MHz VB = 0 Riso -- 1,000 M 500 V DC Recommendable LED forward current IF = 5mA. *Turn on/Turn off time **For type of connection, see Page 444. ***1.25 V at IF = 50 mA Input 90% Output 10% Ton Toff For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 444. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV221, AQV225; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) AQV221 60 AQV225 40 AQV225 50 40 AQV221 30 0.5 Turn on time, ms 80 On resistance, Load current, mA 100 0.4 0.3 0.2 20 20 0 -40 -20 542 0 20 40 60 80 85 Ambient temperature, C 0.1 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C AQV22 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics Sample: AQV221, AQV225; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV221, AQV225; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV221, AQV225; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 0.1 LED turn off current, mA 5 LED operate current, mA Turn off time, ms 0.2 4 3 2 0 0 20 40 60 8085 Ambient temperature, C -40 -20 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion Sample: AQV221, AQV225; LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Current, mA LED dropout voltage, V 1.5 1.4 50mA 30mA 1.3 20mA 10mA 1.2 5mA -2.0 -1.0 100 AQV221 80 60 40 20 AQV225 1.0 2.0 -20 Voltage, V -40 1.1 -60 -80 -100 1.0 -40 -20 2 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Off state leakage current, A -40 -20 3 1 1 0 4 10-3 10-6 10-9 AQV221 10-12 0 20 40 60 80 85 Ambient temperature, C AQV225 0 10 20 30 40 50 60 70 80 Load voltage, V 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Sample: AQV221, AQV225; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Sample: AQV221, AQV225; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F Output capacitance, pF 6 Turn off time, ms Turn on time, ms 0.05 0.3 0.2 0.04 0.03 0.02 5 4 AQV221 3 AQV225 2 0.1 1 0.01 0 10 0 20 30 40 50 LED forward current, mA 0 10 0 20 30 40 50 LED forward currnt, mA 13. Isolation characteristics (50 impedance) 14. Insertion loss characteristics (50 impedance) Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F 0 10 20 30 40 50 60 70 Applied voltage, V 80 100 90 5 70 60 50 AQV221 Isolation, dB Isolation, dB 80 AQV225 AQV225 AQV221 40 0 30 20 10 0 9/1/2000 105 106 Frequency, Hz 107 105 106 Frequency, Hz 107 All Rights Reserved, (c) Copyright Matsushita Electric Works, 543 Ltd. Go To Online Catalog