MMBTA28 PZTA28 C C E E C B TO-92 SuperSOT-3 E C B B SOT-223 Mark: 3SS NPN Darlington Transistor This device is designed for applications requiring extremely high current gain at collector currents to 500 mA. Sourced from Process 03. Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter Value Units VCES Collector-Emitter Voltage 80 V VCBO Collector-Base Voltage 80 V VEBO Emitter-Base Voltage 12 V IC Collector Current - Continuous 800 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD TA = 25C unless otherwise noted Characteristic RJC Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case RJA Thermal Resistance, Junction to Ambient Max Units MPSA28 625 5.0 83.3 *MMBTA28 350 2.8 **PZTA28 1,000 8.0 200 357 125 mW mW/C C/W C/W *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." **Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2. 2001 Fairchild Semiconductor International MPSA28/MMBTA28/PZTA28, Rev A MPSA28 / MMBTA28 / PZTA28 MPSA28 (continued) Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CES Collector-Emitter Breakdown Voltage IC = 100 A, VBE = 0 80 V V(BR)CBO Collector-Base Breakdown Voltage IC = 100 A, IE = 0 80 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 A, IC = 0 12 ICBO Collector Cutoff Current VCB = 60 V, IE = 0 ICES Collector Cutoff Current VCE = 60 V, VBE = 0 500 nA IEBO Emitter Cutoff Current VEB = 10 V, IC = 0 100 nA 1.2 1.5 2.0 V V 100 nA MPSA28 / MMBTA28 / PZTA28 NPN Darlington Transistor ON CHARACTERISTICS hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage VBE(on) Base-Emitter On Voltage IC = 10 mA, VCE = 5.0 V IC = 100 mA, VCE = 5.0 V IC = 10 mA, IB = 0.01 mA IC = 100 mA, IB = 0.1 mA IC = 100 mA, VCE = 5.0 V 10,000 10,000 V SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product Cobo Output Capacitance IC = 10 mA, VCE = 5.0, f = 100 MHz VCB = 1.0 V, IE = 0, f = 1.0 MHz 125 MHz 8.0 pF *Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% 3 Typical Pulsed Current Gain vs Collector Current 100 V CE = 5V 125 C 80 60 25 C 40 20 0 0.001 - 40 C 0.01 0.1 I C - COLLECTOR CURRENT (A) 0.2 V CE(SAT) - COLLECTOR EM ITTE R VOLTAGE (V) h F E - TYPICAL PULSED CURRENT GAIN (K) Typical Characteristics Collector-Emitter Saturation Voltage vs Collector Current 1.6 = 1000 1.2 0.8 - 40 C 25 C 125 C 0.4 0 1 10 100 I C - COLLECTOR CURRE NT (mA) 1000 MPSA28/MMBTA28/PZTA28, Rev A (continued) (continued) Base-Emitter Saturation Voltage vs Collector Current 2 = 1000 1.6 - 40 C 1.2 25 C 125 C 0.8 0.4 0 1 10 100 I C - COLLECTOR CURRE NT (mA) 1000 V BE( ON)- BAS E EMITTER ON VOLTAGE (V) V BE(SAT) - BASE EMITTE R VOLTAGE (V) Typical Characteristics Base Emitter ON Voltage vs Collector Current 2 VCE = 5V 1.6 - 40 C 1.2 25 C 125 C 0.8 0.4 0 1 10 100 I C - COLLECTOR CURRE NT (mA) Input and Output Capacitance vs Reverse Voltage 100 f = 1.0 MHz V CB = 80V CAPACITANCE (pF) 20 10 1 0.1 0.01 25 50 75 100 T A - AMBIE NT TEMP ERATURE ( C) 15 5 400 V ce = 5V 300 200 100 0 10 20 50 I C - COLLECTOR CURRENT (mA) C ob 1 10 100 V CE - COLLECTOR VOLTAGE(V) Collector-Emitter Breakdown Voltage with Resistance Between Emitter-Base Gain Bandwidth Product vs Collector Current 1 C ib 10 2 0.1 125 100 200 150200 300 BV CER - BREAKDOWN VOLTAGE (V) f T - GAIN BANDWIDTH PRODUCT (MHz) I CBO- COLLE CTOR CURRENT (nA) Collector-Cutoff Current vs Ambient Temperature 1000 114.2 114 113.8 113.6 113.4 113.2 113 112.8 0.1 1 10 100 RESISTANCE (k ) 1000 MPSA28/MMBTA28/PZTA28, Rev A MPSA28 / MMBTA28 / PZTA28 NPN Darlington Transistor (continued) Typical Characteristics (continued) Power Dissipation vs Ambient Temperature PD - POWER DISSIPATION (W) 1 SOT-223 0.75 TO-92 0.5 SOT-23 0.25 0 0 25 50 75 100 o TEMPERATURE ( C) 125 MPSA28 / MMBTA28 / PZTA28 NPN Darlington Transistor 150 3 MPSA28/MMBTA28/PZTA28, Rev A TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample See Fig 2.0 for various Reeling Styles FAIRCHILD SEMICONDUCTOR CORPORATION LOT: CBVK741B019 PN2222N NSID: D/C1: HTB:B QTY: 10000 SPEC: D9842 SPEC REV: FSCINT Label B2 QA REV: 5 Reels per Intermediate Box (FSCINT) Customized Label F63TNR Label sample LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: F63TNR Label QTY: 2000 SPEC: QTY1: QTY2: SPEC REV: CPN: N/F: F Customized Label (F63TNR)3 375mm x 267mm x 375mm Intermediate Box TO-92 TNR/AMMO PACKING INFROMATION Packing Style Quantity EOL code Reel A 2,000 D26Z E 2,000 D27Z Ammo M 2,000 D74Z P 2,000 D75Z AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options FSCINT Label Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units 327mm x 158mm x 135mm Immediate Box Customized Label (TO-92) BULK PACKING INFORMATION EOL CODE DESCRIPTION QUANTITY TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX NO LEADCLIP 2.0 K / BOX NO LEADCLIP 2.0 K / BOX TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 L34Z TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 Customized Label F63TNR Label 333mm x 231mm x 183mm Intermediate Box BULK OPTION LEADCLIP DIMENSION J18Z NO EOL CODE 5 Ammo boxes per Intermediate Box See Bulk Packing Information table Anti-static Bubble Sheets FSCINT Label 2000 units per EO70 box for std option 114mm x 102mm x 51mm Immediate Box 5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label FSCINT Label 10,000 units maximum per intermediate box for std option (c)2001 Fairchild Semiconductor Corporation March 2001, Rev. B1 TO-92 Tape and Reel Data, continued TO-92 Reeling Style Configuration: Figure 2.0 Machine Option "A" (H) Machine Option "E" (J) Style "A", D26Z, D70Z (s/h) Style "E", D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ORDER STYLE D74Z (M) FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D75Z (P) FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP September 1999, Rev. B TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Hd P Pd b Ha W1 d L H1 HO L1 S WO t W2 W t1 P1 F1 DO P2 PO User Direction of Feed TO-92 Reel Configuration: Figure 5.0 ITEM DESCRIPTION SYMBOL DIMENSION Base of Package to Lead Bend b 0.098 (max) Component Height Ha 0.928 (+/- 0.025) Lead Clinch Height HO 0.630 (+/- 0.020) Component Base Height H1 0.748 (+/- 0.020) Component Alignment ( side/side ) Pd 0.040 (max) Component Alignment ( front/back ) Hd 0.031 (max) Component Pitch P 0.500 (+/- 0.020) Feed Hole Pitch PO 0.500 (+/- 0.008) Hole Center to First Lead P1 0.150 (+0.009, -0.010) Hole Center to Component Center P2 0.247 (+/- 0.007) Lead Spread F1/F2 0.104 (+/- 0 .010) Lead Thickness d 0.018 (+0.002, -0.003) Cut Lead Length L 0.429 (max) Taped Lead Length L1 0.209 (+0.051, -0.052) Taped Lead Thickness t 0.032 (+/- 0.006) Carrier Tape Thickness t1 0.021 (+/- 0.006) Carrier Tape Width W 0.708 (+0.020, -0.019) Hold - down Tape Width WO 0.236 (+/- 0.012) Hold - down Tape position W1 0.035 (max) Feed Hole Position W2 0.360 (+/- 0.025) Sprocket Hole Diameter DO 0.157 (+0.008, -0.007) Lead Spring Out S 0.004 (max) Note : All dimensions are in inches. ELECT ROSTATIC SEN SITIVE D EVICES D4 D1 D2 F63TNR Label ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM Reel Diameter D1 13.975 14.025 Arbor Hole Diameter (Standard) D2 1.160 1.200 D2 0.650 0.700 Customized Label (Small Hole) W1 Core Diameter D3 3.100 3.300 Hub Recess Inner Diameter D4 2.700 3.100 Hub Recess Depth W1 0.370 0.570 Flange to Flange Inner Width W2 1.630 Hub to Hub Center Width W3 1.690 2.090 W3 W2 Note: All dimensions are inches D3 July 1999, Rev. A TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 (c)2000 Fairchild Semiconductor International January 2000, Rev. B SuperSOTTM-3 Tape and Reel Data SSOT-3 Packaging Configuration: Figure 1.0 Customize Label Packaging Description: SSOT-3 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. Antistatic Cover Tape These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. Human Readable Embossed Label Carrier Tape 3P 3P 3P 3P SSOT-3 Std Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR D87Z SSOT-3 Std Unit Orientation TNR 3,000 10,000 7" Dia 13" 187x107x183 343x343x64 Max qty per Box 24,000 30,000 Weight per unit (gm) 0.0097 0.0097 Weight per Reel (kg) 0.1230 0.4150 343mm x 342mm x 64mm Intermediate box for D87Z Option Human Readable Label Note/Comments Human Readable Label sample Human Readable Label 187mm x 107mm x 183mm Intermediate Box for Standard Option SSOT-3 Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 75 empty pockets (c)2000 Fairchild Semiconductor International Leader Tape 500mm minimum or 125 empty pockets August 1999, Rev. C SuperSOTTM-3 Tape and Reel Data, continued SSOT-3 Embossed Carrier Tape Configuration: Figure 3.0 P0 P2 D1 D0 T E1 W F E2 Wc B0 Tc A0 P1 K0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SSOT-3 (8mm) 3.15 +/-0.10 2.77 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.30 +/-0.10 0.228 +/-0.013 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 0.06 +/-02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 5.2 +/-0.3 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SSOT-3 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 2.165 55 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 - 0.429 7.9 - 10.9 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 - 0.429 7.9 - 10.9 8mm 7" Dia 7.00 177.8 8mm 13" Dia 13.00 330 Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) July 1999, Rev. C SuperSOTTM-3 Package Dimensions SuperSOT-3 (FS PKG Code 32) 1:1 Scale 1:1 on letter size paper Di mensions shown below are in: inches [mil limeters] Part Weight per unit (gram): 0.0097 (c)2000 Fairchild Semiconductor International September 1998, Rev. A SOT-223 Tape and Reel Data SOT-223 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: F63TNR Label Antistatic Cover Tape SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. Static Dissipative Embossed Carrier Tape F852 014 F852 014 F852 014 F852 014 SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR 2,500 D84Z SOT-223 Unit Orientation TNR 500 13" Dia 7" Dia 343x64x343 184x187x47 Max qty per Box 5,000 1,000 Weight per unit (gm) 0.1246 0.1246 Weight per Reel (kg) 0.7250 0.1532 343mm x 342mm x 64mm Intermediate box for Standard F63TNR Label Note/Comments F63TNR Label F63TNR Label sample 184mm x 184mm x 47mm Pizza Box for D84Z Option SOT-223 Tape Leader and Trailer Configuration: Figure 2.0 LOT: CBVK741B019 QTY: 3000 FSID: PN2222A SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 38 empty pockets (c)2000 Fairchild Semiconductor International Leader Tape 500mm minimum or 62 empty pockets September 1999, Rev. B SOT-223 Tape and Reel Data, continued SOT-223 Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type SOT-223 (12mm) A0 6.83 +/-0.10 B0 7.42 +/-0.10 W 12.0 +/-0.3 D0 D1 1.55 +/-0.05 1.50 +/-0.10 E1 E2 1.75 +/-0.10 F 10.25 min P1 5.50 +/-0.05 P0 8.0 +/-0.1 4.0 +/-0.1 K0 1.88 +/-0.10 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). T Wc 0.292 +/0.0130 9.5 +/-0.025 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SOT-223 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 5.906 150 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 - 0.606 11.9 - 15.4 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 7.00 178 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 - 0.606 11.9 - 15.4 12mm 7" Dia 7.00 177.8 12mm 13" Dia 13.00 330 Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) July 1999, Rev. B SOT-223 Package Dimensions SOT-223 (FS PKG Code 47) 1:1 Scale 1:1 on letter size paper Part Weight per unit (gram): 0.1246 (c)2000 Fairchild Semiconductor International September 1999, Rev. C TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G