T-13/4 (5 mm), T-1 (3 mm), Low Current, Double Heterojunction AlGaAs Red LED Lamps Technical Data HLMP-D150/D155 HLMP-K150/K155 Features Applications * Minimum Luminous Intensity Specified at 1 mA * High Light Output at Low Currents * Wide Viewing Angle * Outstanding Material Efficiency * Low Power/Low Forward Voltage * CMOS/MOS Compatible * TTL Compatible * Deep Red Color * Low Power Circuits * Battery Powered Equipment * Telecommunication Indicators Description These solid state LED lamps utilize newly developed double heterojunction (DH) AlGaAs/GaAs material technology. This LED material has outstanding light output efficiency at very low drive currents. The color is deep red at the dominant wavelength of 637 nanometres. These lamps are ideally suited for use in applications where high light output is required with minimum power output. 3.43 (0.135) 2.92 (0.115) 3.17 (0.125) 2.67 (0.105) Package Dimensions 4.70 (0.185) 4.19 (0.165) 6.35 (0.250) 5.58 (0.220) 1.14 (0.045) 0.51 (0.020) SHOULDER 0.65 (0.026) MAX. 0.55 (0.022) SQ. TYP. 0.40 (0.016) 24.1 MIN. (0.95) CATHODE A 2.79 (0.110) 2.29 (0.090) 1.52 (0.060) 1.02 (0.040) B C 2 Selection Guide Package Description T-1 3/4 Red Tinted Diffused T-1 3/4 Red Untinted Non-diffused T-1 Red Tinted Diffused T-1 Red Untinted Non-diffused Device HLMPD150 Luminous Intensity Iv (mcd) at 1 mA Min. Typ. Max. 1.3 3.0 - 21/2[1] Degree 65 Package Outline A D150-C00xx D150-CD0xx 1.3 1.3 3.0 3.0 - 4.2 65 65 A A D155 D155-F00xx K150 5.4 5.4 1.3 10.0 10.0 2.0 - - - 24 24 60 B B C K150-C00xx K150-CD0xx 1.3 1.3 2.0 3.0 - 4.2 60 60 C C K155 K155-CD0xx K155-D00xx 2.1 1.3 2.1 3.0 3.0 3.0 - 4.2 - 45 45 45 C C C K155-DE0xx 2.1 3.0 6.8 45 C Note: 1. 1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 the on-axis value. Part Numbering System HLMP - x 1 xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads A1, B1: Right Angle Housing, Uneven Leads A2, B2: Right Angle Housing, Even Leads DD, DH: Ammo Pack Color Bin Optioms 0: Full color bin distribution Maximum Iv Bin Options 0: Open (No max. limit) Others: Please refer to the Iv bin table Minimum Iv Bin Options Please refer to the Iv bin table Lens Option 50: Tinted, Diffused 55: Untinted, Nondiffused Package Options D: T-13/4 (5 mm) K: T-1 (3 mm) 3 Absolute Maximum Ratings at TA = 25C Peak Forward Current[1] ...................................................................................................................... 300 mA Average Forward Current ....................................................................................................................... 20 mA DC Current[2] ......................................................................................................................................... 30 mA Power Dissipation ................................................................................................................................. 87 mW Reverse Voltage (IR = 100 A).................................................................................................................... 5 V Transient Forward Current (10 s Pulse)[3] ......................................................................................... 500 mA LED Junction Temperature ..................................................................................................................... 110C Operating Temperature Range ................................................................................................... -20 to +100C Storage Temperature Range ....................................................................................................... -55 to +100C Lead Soldering Temperature [1.6 mm (0.063 in.) from body]........................................... 260C for 5 seconds Notes: 1. Maximum IPEAK at f = 1 kHz, DF = 6.7%. 2. Derate linearly as shown in Figure 4. 3. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current. Electrical/Optical Characteristics at TA = 25 C Symbol Description Min. Typ. Max. Unit Test Condition 1.6 1.8 V IF = 1 mA 15.0 V IR = 100 A VF Forward Voltage VR Reverse Breakdown Voltage p Peak Wavelength 645 nm Measurement at Peak d Dominant Wavelength 637 nm Note 1 1/2 Spectral Line Halfwidth 20 nm S Speed of Response 30 ns Exponential Time Constant, e-t/TS C Capacitance 30 pF VF = 0, f = 1 MHz 260[3] C/W Junction to Cathode Lead Im/W Note 2 RJ-PIN Thermal Resistance 5.0 210[4] 290[5] V Luminous Efficacy 80 Notes: 1. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the color of the device. 2. The radiant intensity, Ie , in watts per steradian, may be found from the equation Ie = lV/V, where IV is the luminous intensity in candelas and V is luminous efficacy in lumens/watt. 3. HLMP-D150. 4. HLMP-D155. 5. HLMP-K150/-K155. 4 Figure 1. Relative Intensity vs. Wavelength. Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Maximum Forward DC Current vs. Ambient Temperature. Derating Based on TJ Max. = 110 C. 5 Figure 5. Relative Luminous Intensity vs. Angular Displacement. HLMP-D150. Figure 6. Relative Luminous Intensity vs. Angular Displacement. HLMP-K150. Figure 7. Relative Luminous Intensity vs. Angular Displacement. HLMP-D155. Figure 8. Relative Luminous Intensity vs. Angular Displacement. HLMP-K155. 6 Intensity Bin Limits Color Red Bin C D E F G H I J K L M N O P Q R S T U V W X Y Z Intensity Range (mcd) Min. Max. 1.5 2.4 2.4 3.8 3.8 6.1 6.1 9.7 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 Maximum tolerance for each bin limit is 18%. Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 01 Tape & Reel, crimped leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1 02 Tape & Reel, straight leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1 A1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag A2 T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag B1 T-13/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag B2 T-13/4, Right Angle Housing, even leads, minimum increment 500 pcs/bag DD Ammo Pack, straight leads with minimum 2K increment DH Ammo Pack, straight leads with minimum 2K increment Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. Obsoletes 5968-1438EN December 11, 2001 5988-2229EN