HLMP-K150-C00A1 - Agilent / Hewlett-Packard

T-13/4 (5 mm), T-1 (3 mm), Low

Current, Double Heterojunction

AlGaAs Red LED Lamps

Technical Data

Features

• Minimum Luminous Inten-

sity Specified at 1 mA

• High Light Output at Low

Currents

• Wide Viewing Angle

• Outstanding Material

Efficiency

• Low Power/Low Forward

Voltage

• CMOS/MOS Compatible

• TTL Compatible

• Deep Red Color

Applications

• Low Power Circuits

• Battery Powered Equipment

• Telecommunication

Indicators

Description

These solid state LED lamps

utilize newly developed double

heterojunction (DH) AlGaAs/GaAs

material technology. This LED

material has outstanding light

output efficiency at very low drive

currents. The color is deep red at

the dominant wavelength of 637

nanometres. These lamps are

ideally suited for use in

applications where high light

output is required with minimum

power output.

Package Dimensions

HLMP-D150/D155

HLMP-K150/K155

1.14 (0.045)

0.51 (0.020)

3.43 (0.135)

2.92 (0.115)

24.1

(0.95)MIN.

4.70 (0.185)

4.19 (0.165)

3.17 (0.125)

2.67 (0.105)

2.79 (0.110)

2.29 (0.090)

1.52 (0.060)

1.02 (0.040)

6.35 (0.250)

5.58 (0.220)

0.55 (0.022)

0.40 (0.016)

CATHODE

∅

0.65 (0.026) MAX.

SQ. TYP.

SHOULDER

Selection Guide

Luminous Intensity Iv (mcd)

at 1 mA 2θ1/2[1] Package

Package Description Device HLMP- Min. Typ. Max. Degree Outline

T-1 3/4 Red Tinted Diffused D150 1.3 3.0 – 65 A

D150-C00xx 1.3 3.0 – 65 A

D150-CD0xx 1.3 3.0 4.2 65 A

T-1 3/4 Red Untinted Non-diffused D155 5.4 10.0 – 24 B

D155-F00xx 5.4 10.0 – 24 B

T-1 Red Tinted Diffused K150 1.3 2.0 – 60 C

K150-C00xx 1.3 2.0 – 60 C

K150-CD0xx 1.3 3.0 4.2 60 C

T-1 Red Untinted Non-diffused K155 2.1 3.0 – 45 C

K155-CD0xx 1.3 3.0 4.2 45 C

K155-D00xx 2.1 3.0 – 45 C

K155-DE0xx 2.1 3.0 6.8 45 C

Part Numbering System

Note:

1. θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 the on-axis value.

HLMP - x 1 xx - x x x xx

Mechanical Option

00: Bulk

01: Tape & Reel, Crimped Leads

02: Tape & Reel, Straight Leads

A1, B1: Right Angle Housing, Uneven Leads

A2, B2: Right Angle Housing, Even Leads

DD, DH: Ammo Pack

Color Bin Optioms

0: Full color bin distribution

Maximum Iv Bin Options

0: Open (No max. limit)

Others: Please refer to the Iv bin table

Minimum Iv Bin Options

Please refer to the Iv bin table

Lens Option

50: Tinted, Diffused

55: Untinted, Nondiffused

Package Options

D: T-13/4 (5 mm)

K: T-1 (3 mm)

Absolute Maximum Ratings at TA = 25°C

Peak Forward Current[1] ...................................................................................................................... 300 mA

Average Forward Current....................................................................................................................... 20 mA

DC Current[2] ......................................................................................................................................... 30 mA

Power Dissipation ................................................................................................................................. 87 mW

Reverse Voltage (IR = 100 µA).................................................................................................................... 5 V

Transient Forward Current (10 µs Pulse)[3] ......................................................................................... 500 mA

LED Junction Temperature ..................................................................................................................... 110°C

Operating Temperature Range ................................................................................................... -20 to +100°C

Storage Temperature Range....................................................................................................... -55 to +100°C

Lead Soldering Temperature [1.6 mm (0.063 in.) from body]........................................... 260°C for 5 seconds

Notes:

1. Maximum IPEAK at f = 1 kHz, DF = 6.7%.

2. Derate linearly as shown in Figure 4.

3. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and

wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.

Electrical/Optical Characteristics at TA = 25°C

Symbol Description Min. Typ. Max. Unit Test Condition

VFForward Voltage 1.6 1.8 V IF = 1 mA

VRReverse Breakdown Voltage 5.0 15.0 V IR = 100 µA

λpPeak Wavelength 645 nm Measurement at Peak

λdDominant Wavelength 637 nm Note 1

∆λ1/2Spectral Line Halfwidth 20 nm

τSSpeed of Response 30 ns Exponential Time

Constant, e-t/TS

C Capacitance 30 pF VF = 0, f = 1 MHz

RθJ-PIN Thermal Resistance 260[3] °C/W Junction to Cathode Lead

210[4]

290[5]

ηVLuminous Efficacy 80 Im/W Note 2

Notes:

1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the color of the device.

2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = lV/ηV, where IV is the luminous intensity in

candelas and ηV is luminous efficacy in lumens/watt.

3. HLMP-D150.

4. HLMP-D155.

5. HLMP-K150/-K155.

Figure 3. Relative Luminous Intensity vs. DC Forward

Current. Figure 4. Maximum Forward DC Current vs. Ambient

Temperature. Derating Based on TJ Max. = 110 °C.

Figure 1. Relative Intensity vs. Wavelength. Figure 2. Forward Current vs. Forward Voltage.

Figure 5. Relative Luminous Intensity vs. Angular

Displacement. HLMP-D150. Figure 6. Relative Luminous Intensity vs. Angular

Displacement. HLMP-K150.

Figure 7. Relative Luminous Intensity vs. Angular

Displacement. HLMP-D155. Figure 8. Relative Luminous Intensity vs. Angular

Displacement. HLMP-K155.

Mechanical Option Matrix

Mechanical

Option Code Definition

00 Bulk Packaging, minimum increment 500 pcs/bag

01 Tape & Reel, crimped leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1

02 Tape & Reel, straight leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1

A1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag

A2 T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag

B1 T-13/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag

B2 T-13/4, Right Angle Housing, even leads, minimum increment 500 pcs/bag

DD Ammo Pack, straight leads with minimum 2K increment

DH Ammo Pack, straight leads with minimum 2K increment

Note:

All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent

representative for further clarification/information.

Intensity Bin Limits

Intensity Range (mcd)

Color Bin Min. Max.

Red C 1.5 2.4

D 2.4 3.8

E 3.8 6.1

F 6.1 9.7

G 9.7 15.5

H 15.5 24.8

I 24.8 39.6

J 39.6 63.4

K 63.4 101.5

L 101.5 162.4

M 162.4 234.6

N 234.6 340.0

O 340.0 540.0

P 540.0 850.0

Q 850.0 1200.0

R 1200.0 1700.0

S 1700.0 2400.0

T 2400.0 3400.0

U 3400.0 4900.0

V 4900.0 7100.0

W 7100.0 10200.0

X 10200.0 14800.0

Y 14800.0 21400.0

Z 21400.0 30900.0

Maximum tolerance for each bin limit is ±18%.

www.agilent.com/semiconductors

For product information and a complete list of

distributors, please go to our web site.

For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or

(408) 654-8675

Europe: +49 (0) 6441 92460

China: 10800 650 0017

Hong Kong: (+65) 271 2451

India, Australia, New Zealand: (+65) 271 2394

Japan: (+81 3) 3335-8152(Domestic/Interna-

tional), or 0120-61-1280(Domestic Only)

Korea: (+65) 271 2194

Malaysia, Singapore: (+65) 271 2054

Taiwan: (+65) 271 2654

Data subject to change.

Obsoletes 5968-1438EN

December 11, 2001

5988-2229EN