LCA717 Single-Pole, Normally Open OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max RON Ratings 30 2 0.15 Units VP ADC/Arms Features * Very Low Maximum On-Resistance: 0.15 * High Load Current: 2A * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 6-Pin DIP Package * Machine Insertable, Wave Solderable * Surface Mount, Tape & Reel Version Available Applications * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment: Patient/Equipment Isolation * Aerospace * Industrial Controls Description The LCA717 is a 30V, single-pole, normally-open (1-Form-A) Solid State Relay. The ultra-low on-resistance of this relay enables high-current operation. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches, while providing 3750Vrms input-to-output isolation. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 006 Ordering Information Part # LCA717 LCA717S LCA717STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Load Do Not Use Load DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-LCA717-R03 toff e3 www.clare.com 1 LCA717 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 30 5 50 1 100 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous AC/DC Configuration DC Configuration Peak Load Current On-Resistance1 AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance Conditions Symbol Min Typ Max Units - IL - - 2 4 5 ADC/Arms A A t=10ms ILPK - IL=1A RON - 0.083 0.023 - 0.15 0.04 1 VL=30VP ILEAK - - 0.92 0.44 100 3 3 - A VL=15V, f=1MHz ton toff COUT IL=1A IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.115 1.2 - 2 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V - ms pF 1 Measurement taken within 1 second of on-time. ESD Rating ESD Rating (Human Body Model) 1000 Volts 2 www.clare.com R03 LCA717 PERFORMANCE DATA* Typical Turn-On Time Distribution (N=50, IF=5mA, IL=120mA, TA=25C) 25 25 20 20 20 15 10 15 10 5 0 0 0.730 0.785 0.840 0.895 0.950 1.005 1.060 Turn-On Time (ms) Typical IF for Switch Operation (N=50, IL=500mA, TA=25C) Typical On-Resistance Distribution (N=50, IF=2mA, IL=1A, TA=25C) 10 5 0.110 0.115 0.120 0.125 LED Forward Current (mA) 15 10 5 0 0.130 80.0 1.3 1.2 1.0 -40 0.17 IF=5mA IF=2mA IF=1mA -20 83.0 84.5 86.0 87.5 20 40 60 Temperature (C) 80 3000 2000 1000 0.13 0.12 0.11 20 40 60 Temperature (C) 80 Typical Turn-Off vs. LED Forward Current (TA=25C) 410 390 370 0 10 20 30 40 LED Forward Current (mA) 700 IF=1mA 650 3000 2500 IF=2mA 2000 1500 IF=5mA 1000 100 0 -40 50 Typical Turn-Off Time vs. Temperature 500 0 38.2 430 50 4000 0.14 37.0 37.3 37.6 37.9 Blocking Voltage (VP) 350 10 20 30 40 LED Forward Current (mA) 3500 -20 36.7 Typical Turn-On Time vs. Temperature 0.15 0.46 5 450 0 Typical IF for Switch Operation vs. Temperature (IL=1A) 0.45 10 36.4 4000 100 0.44 0 89.0 0 0 0.16 0.10 -40 81.5 Turn-Off Time (Ps) Turn-On Time (Ps) 1.4 0.43 15 Typical Turn-On Time vs. LED Forward Current (TA=25C) 5000 IF=50mA IF=20mA IF=10mA Turn-On Time (Ps) LED Forward Voltage (V) 1.6 1.1 0.42 On-Resistance (m:) Typical LED Forward Voltage Drop vs. Temperature 1.5 0.41 20 Turn-Off Time (Ps) 0.105 5 Blocking Voltage Distribution (N=50, TA=25C) Device Count (N) Device Count (N) Device Count (N) 15 10 Turn-Off Time (ms) 20 20 15 0 1.215 1.230 1.245 1.260 1.275 1.290 1.305 LED Forward Voltage (V) 25 0 Device Count (N) 25 5 LED Forward Current (mA) Typical Turn-Off Time Distribution (N=50, IF=5mA, IL=120mA, TA=25C) 30 Device Count (N) Device Count (N) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) IF=1mA 600 IF=2mA 550 500 450 400 IF=5mA 350 -20 0 20 40 60 Temperature (C) 80 100 300 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 LCA717 PERFORMANCE DATA* Typical On-Resistance vs. Temperature (IF=2mA, IL=1A) 0.12 Typical Load Current vs. Temperature DC-Only Configuration (ADC) 0.08 0.07 AC/DC Configuration (ADC/Arms) 2 1.0 0.5 0.0 -0.5 -1.0 -1.5 0 0 20 40 60 Temperature (C) 80 -40 100 Typical Blocking Voltage vs. Temperature (IL=1PA) 350 38.5 38.0 37.5 37.0 36.5 36.0 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 -2.0 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 Load Voltage (V) Typical Leakage vs. Temperature Measured Across Pins 4&6 (VL=30V) 8 300 7 250 6 Load Current (A) -20 Leakage Current (nA) Blocking Voltage (VP) 3 1 0.06 35.5 -40 Load Current (A) Load Current On-Resistance (:) 0.09 39.0 1.5 4 0.10 0.05 -40 2.0 5 0.11 Typical Load Current vs. Load Voltage (IF=2mA, TA=25C) 200 150 100 50 0 -40 Energy Rating Curve (TA=25C) 5 4 3 2 1 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 LCA717 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCA717 / LCA717S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCA717 / LCA717S 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 RoHS 2002/95/EC e3 www.clare.com 5 LCA717 MECHANICAL DIMENSIONS LCA717 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) LCA717S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.clare.com R03 LCA717 MECHANICAL DIMENSIONS (Cont.) LCA717S Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA717-R03 (c)Copyright 2011, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/25/2011