2N6578
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5560
Issue 1
NPN BIPOLAR
POWER D ARLINGT ON
TRANSIST OR
FEATURES
• FAST SWITCHING
• CECC SCREENING OPTIONS
• SPACE QUALITY LEVELS OPTIONS
• JAN LEVEL SCREENING OPTIONS
VCBO Collector – Base Voltage (IE= 0)
VCEO Collector – Emitter Voltage (IB= 0)
VEBO Emitter – Base Voltage (IC= 0)
IBBase Current
ICCollector Current
PDPower Dissipation @ TC= 25°C
RθJC Thermal Resistance Junction to Case
TJ, TSTG Operating and Storage Junction Temperature Range
120V
120V
7V
250mA
15A
120W
1.46°C/W
–65 to +200°C
MECHANICAL DATA
Dimensions in mm (inches)
TO-3 (TO-204AA)
ABSOLUTE MAXIMUM RATINGS (Tc= 25°C unless otherwise stated)
Underside View
1 = Emitter 2 = Base 3 = Collector
12
3
(case)
25.15 (0.99)
26.67 (1.05)
10.67 (0.42)
11.18 (0.44)
38.61 (1.52)
39.12 (1.54)
29.9 (1.177)
30.4 (1.197)
16.64 (0.655)
17.15 (0.675)
3.84 (0.151)
4.09 (0.161)
0.97 (0.060)
1.10 (0.043)
7.92 (0.312)
12.70 (0.50)
22.23
(0.875)
max.
6.35 (0.25)
9.15 (0.36)
1.52 (0.06)
3.43 (0.135)
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
APPLICATIONS
•HIGH SPEED SWITCHING CIRCUITS
• POWER AMPLIFIERS
2N6578
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5560
Issue 1
Parameter Test Conditions Min. Typ. Max. Unit
120 500
5.0
5.0
1.0
2.8
4.0
3.5
4.5
200
2000 20000
500 5000
100
4.5
10 200
0.15
1.0
2.0
7.0
IC= 200mA
VCB = 120V
VCEV = 120V VBE(off) = 1.5V
VCER = 120V RBE = 10kΩ
TC= 150°C
VCE = 120V
IC= 10A IB= 100mA
IC= 15A IB= 150mA
IC= 10A IB= 100mA
IC= 15A IB= 150mA
IC= 0.4A VCE = 3V
IC= 4.0A VCE = 3V
IC= 10A VCE = 3V
IC= 15A VCE = 4V
IEC = 15A
VCE = 3V IC= 3A
f = 1.0MHz
IC= 10A VCC = 30V
IB1 = 100mA
IC= 10A VCC = 30V
IB1 =-I
B2 = 100mA
BVCEO Collector – Emitter Breakdown Voltage
ICBO Collector – Base Cut-off Current
ICEV Collector – Emitter Cut-off Current
ICER Collector – Emitter Cut-off Current
ICEO Collector – Base Cut-off Current
VCE(sat) Collector – Emitter Saturation Voltage
VBE(sat) Base – Emitter On Voltage
hFE DC Current Gain
VFForward Voltage
[hfe] Small Signal Current Gain
tdDelay Time
trRise time
tsStorage Time
tfFall Time
V
µA
mA
V
—
V
—
µs
ELECTRICAL CHARACTERISTICS (TC= 25°C unless otherwise stated)
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
