T-1 (3mm) CYLINDRICAL LED LAMP Part Number: WP424QR51WT/D-AMT Cyan ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic z High reliability LED package. glove when handling the LEDs. z Cylindrical type. All devices, equipment and machinery must be electrically z Low power consumption. grounded. z Reliable and rugged. Applications z Long life - solid state reliability. z Traffic signaling. z Available on tape and reel. z Backlighting (illuminated advertising , general lighting). z RoHS compliant. z Interior and exterior automotive lighting. z Substitution of micro incandescent lamps. z Reading lamps. z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). z Decorative and entertainment lighting. z Indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 Selection Guide Part No. Dice WP424QR51WT/D-AMT Iv (mcd) [2] @ 20mA Lens Type Cyan (InGaN) Viewing Angle [1] Code. Min. Max. M 80 120 N 120 200 White Diffused 21/2 100 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at Ta=25C Parameter Symbol Value Unit Power dissipation PD 120 mW Reverse Voltage VR 5 V Junction temperature TJ 120 C Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +120 C IF 30 mA IFM 150 mA 250 V 350 C/W DC Forward Current[1] Peak Forward Current [2] Electrostatic Discharge Threshold (HBM) Thermal Resistance (Junction/ambient) [1] Rth j-a Lead Solder Temperature [3] 260C For 3 Seconds Lead Solder Temperature [4] 260C For 5 Seconds Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. 2mm below package base. 4. 5mm below package base. Electrical / Optical Characteristics at Ta=25C Parameter Symbol Value Chromaticity coordinate x acc.to CIE1931 [Typ.] IF=20mA x [1] 0.19 Chromaticity coordinate y acc.to CIE1931 [Typ.] IF=20mA y [1] 0.41 Reverse Current (VR = 5V) [Max.] IR 50 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Unit uA VF [2] 3.3 Forward Voltage IF=20mA [Max.] V 4.0 Temperature coefficient of VF IF=20mA, -10 C T100 C [Typ.] TCV -2.5 mV/ C Temperature coefficient of x IF=20mA, -10 C T100 C [Typ.] TCX -0.1 10-3/ C Temperature coefficient of y IF=20mA, -10 C T100 C [Typ.] TCy -0.2 10-3/ C Notes: 1.Measurement tolerance of the chromaticity coordinates is 0.02. 2.Forward Voltage: +/-0.1V. SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 Cyan WP424QR51WT/D-AMT SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 WP424QR51WT/D-AMT 0.50 0.49 0.48 0.47 0.46 B6 0.45 B61 0.44 0.43 B5 B51 0.42 0.41 0.40 B4 B41 0.39 0.38 0.37 B3 B31 0.36 0.35 0.34 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 B3 0.23 0.24 B31 X 0.1565 0.1795 0.1850 0.1630 X 0.1795 0.1850 0.2070 0.2025 Y 0.3500 0.3500 0.3800 0.3800 Y 0.3500 0.3800 0.3800 0.3500 X 0.1850 0.1630 0.1680 0.1900 X 0.1850 0.2070 0.2120 0.1900 Y 0.3800 0.3800 0.4100 0.4100 Y 0.3800 0.3800 0.4100 0.4100 X 0.1680 0.1900 0.1970 0.1750 X 0.2120 0.1900 0.2190 0.1970 Y 0.4100 0.4100 0.4400 0.4400 Y 0.4100 0.4100 0.4400 0.4400 X 0.1970 0.1750 0.1810 0.2030 X 0.2190 0.1970 0.2030 0.2250 Y 0.4400 0.4400 0.4700 0.4700 Y 0.4400 0.4400 0.4700 0.4700 B4 B41 B5 B51 B6 B61 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.02. SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 PACKING & LABEL SPECIFICATIONS WP424QR51WT/D-AMT SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Times / Number of Cycles Damaged Test Condition 1 Continuous operating test - Ta =25C ,IF = maximum rated current* 1,000 h 0 / 22 2 High Temp. operating test EIAJ ED4701/100(101) Ta = 100C IF = maximum rated current* 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJ EDTa = maximum rated storage temperature 4701/100(201) 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED4701/100(202) Ta = -40C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED4701/100(103) Ta = 60C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED4701/100(102) Ta = 60C, RH = 90% IF = maximum rated current* 1,000 h 0 / 22 8 Soldering reliability test EIAJ ED4701/100(301) Moisture soak : 30C,70% RH, 72h Preheat : 150~180C(120s max.) Soldering temp : 260C(10s) 3 times 0 / 18 9 Thermal shock operating test - Ta = -40C(15min) ~ 100C(15min) IF = derated current at 100C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40C(15min) ~ maximum rated storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED4701/100(304) C = 100pF , R2 = 1.5K V = 250V Once each Polarity 0 / 22 12 Vibration test - a = 196m/s , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 SPEC NO: DSAL4343 REV NO: V.1 DATE: DEC/01/2010 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101030002 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: WP424QR51WT/D-AMT