DATA SHEET
Product Specification
Supersedes data of 2001-09-13
File under BCcomponents, BC05
2002 Oct 07
BCcomponents
MKP 435 X2
Interference suppression film
capacitors, insulated leads
2002 Oct 07 2
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
MKP RADIAL POTTED TYPE PITCH 15/22.5/27.5 mm
296x12(full_width)
CBB112
Fig.1 Simplified outlines.
FEATURES
•15 to 27.5 mm lead pitch
•Insulated leads
•Supplied loose in box
•Consists of a low-inductive wound
cell of metallized polypropylene
film, potted in a flame-retardant
case.
APPLICATIONS
•For X2 electromagnetic interference
suppression
•Specially designed to meet the
requirements of the
“IEC 60384-14 2nd edition and
EN 132400”, requiring for X2 a
2.5 kV peak pulse voltage test and
both UL1414 and CSA-C22.2 No 1
specifications.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-14/117”.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 0.01 to 1.0 µF
Capacitance tolerance ±20%, ±10%
Rated (AC) voltage , 50 to 60 Hz 275 V
Rated (DC) voltage 630 V
Climatic category 40/100/56/C (15 nF to 1.0 µF)
40/085/56/C (10 nF)
Rated temperature 100 °C
Maximum application temperature 100 °C
Reference specifications IEC 60384-14 2nd edition and
EN 132400
Safety approvals ENEC
Safety class X2; across the line
2002 Oct 07 3
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
SAFETY APPROVALS AND SAFETY TEST REPORT
Approvals
Safety test report
The Enec-approval together with the CB-Certificate replace all national approval marks of the following countries
(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany;
Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway, Portugal; Slovenian; Spain; Sweden; Switzerland and
United Kingdom.
SAFETY APPROVALS (X2) VOLTAGE VALUE FILE NUMBERS
EN132400 275 V (AC) 10 nF to 1.0 µF ENEC/B07/2001
SAFETY TEST REPORT VOLTAGE VALUE FILE NUMBERS
CB TEST CERTIFICATE 275 V (AC) 10 nF to 1.0 µF: 40/085/21/C DE-1-5671
02
2002 Oct 07 4
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
COMPOSITION OF CATALOGUE NUMBER
TYPE PACKAGING STANDARD DIMENSIONS LEAD CONFIGURATION C-TOL PREFERRED TYPES
435
X2 loose in box
lead length 35.0 mm Solid Cu wire 0.8 mm ±20% 20
lead length 35.0 mm Stranded Cu wire 0.5 mm2±20% 23
ON REQUEST
435
X2 loose in box
lead length 35.0 mm
Solid Cu wire 0.8 mm
±10% 30
lead length 40.0 mm ±20% 21
±10% 31
lead length 45.0 mm ±20% 22
±10% 32
lead length 35.0 mm
Stranded Cu wire 0.5 mm2
±10% 33
lead length 40.0 mm ±20% 24
±10% 34
lead length 45.0 mm ±20% 25
±10% 35
2222 435 XX XX X
TYPE AND PITCHES
435
X2
15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 =10 x 10 =100 nF
2002 Oct 07 5
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
MKP 435 GENERAL DATA PITCH 15/22.5/27.5 mm
Specific reference data for the 275 V AC (X2) capacitors
Available 275 V AC (X2) versions
Notes
1. Lead length: lt=±
5mm.
2. The parts without insulation are tinned.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
100nF<C≤470 nF ≤10 ×10−4≤20 ×10−4≤100 ×10−4
470nF<C≤1µF≤20 ×10−4≤70 ×10−4−
Rated voltage pulse slope (dU/dt)R at 385 V (DC) 100 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C > 0.33 µF at 100 V; 1 minute >10000 s
R between leads and case; 100 V; 1 minute >30000 MΩ
Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s 1200 V; 1 minute
Withstanding (AC) voltage between leads and case 2050 V; 1 minute
PACKAGING STANDARD
DIMENSIONS(1)(2) LEAD CONFIGURATION C-tol ORDERING FIRST 9 DIGITS OF
CATALOGUE NUMBER
loose in box
lead length 35.0 mm
Solid Cu wire 0.8 mm
±20% preferred 2222 435 20...
±10% on request 2222 435 30...
lead length 40.0 mm ±20% on request 2222 435 21...
±10% on request 2222 435 31...
lead length 45.0 mm ±20% on request 2222 435 22...
±10% on request 2222 435 32...
lead length 35.0 mm
Stranded Cu wire 0.5 mm2
±20% preferred 2222 435 23...
±10% on request 2222 435 33...
lead length 40.0 mm ±20% on request 2222 435 24...
±10% on request 2222 435 34...
lead length 45.0 mm ±20% on request 2222 435 25...
±10% on request 2222 435 35...
296x12(full_width)
P
h ±0.3
lt
7.0±2.0
l ±0.3 b ±0.3
ØdtCBB102
Ødi
Fig.3 Outline.
Dimensions in mm.
2002 Oct 07 6
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
C-tol =
==
=±
±±
±20% URac =
==
=275 V
(for reference: URdc = 630 V)
Notes
1. ∅ di isolation =2.4 mm for P =15 mm and 2.8 mm for P >15 mm.
2. ∅ di isolation =2.4 mm.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER 2222 435 ..... AND PACKAGING
LOOSE IN BOX
lt=
==
=35 ±
±±
±5mm
lead configuration =
==
=solid
Cu wire =
==
=0.8 mm(1)
lead configuration =
==
=stranded
Cu wire =
==
=0.5 mm2(2)
C-tol =
==
=±
20% C-tol =
==
=±
20%
last 5 digits of
catalogue number SPQ last 5 digits of
catalogue number SPQ
Reference pitch: P =
==
=15 mm
0.01
5.5 ×10.5 ×18.0 1.5
20103
500
23103
500
0.015 20153 23153
0.022 20223 23223
0.033 20333 23333
0.047 6.5 ×12.5 ×18.0 2.0 20473 400 23473 400
0.068 7.5 ×13.5 ×18.0 2.5 20683 400 23683 400
0.10 8.5 ×14.5 ×18.0 3.0 20104 400 23104 400
Reference pitch: P =
==
=22.5 mm
0.15 7.5 ×15.5 ×26.5 4.0 20154 200 23154 200
0.22 8.5 ×16.5 ×26.5 5.0 20224 200 23224 200
0.33 10.5 ×18.5 ×26.5 6.5 20334 150 23334 150
Reference pitch: P =
==
=27.5 mm
0.47 11.5 ×20.5 ×31.5 10.0 20474 100 23474 100
0.68 13.5 ×23.5 ×31.5 13.0 20684 100 23684 100
1 15.0 ×24.5 ×31.5 15.0 20105 75 23105 75
2002 Oct 07 7
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
CONSTRUCTION
Description
•Low-inductive wound cell of metallized polypropylene
(PP) film, potted with epoxy resin in a flame-retardant
case
•Radial insulated leads:
– Solid wire 0.8 mm with PVC insulation
– Stranded tinned wire 0.5 mm2 with PVC insulation.
144x12(halfpage)
metal spray layer
MKP metallized polypropylene film
CBA198
connecting wire
Fig.4 Construction.
Mounting
NORMAL USE
The capacitors are designed for snap-in mounting and
soldering.
Storage temperature
•Storage temperature: Tstg =−
25 to +40 °C with RH
maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient temperature of 23 ±1°C, an atmospheric pressure
of 86 to 106 kPa and a relative humidity of 50 ±2%.
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperature and a relative humidity not
exceeding 20%.
2002 Oct 07 8
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
CHARACTERISTICS
Capacitance
Tangent of loss angle
296x12(full_width)
-40
CBB108
4
-6
-4
-2
0
2
Tamb (°C)
∆C/C
(%)
max.
min.
typical
-20 0 20 40 60 80 100
Fig.5 Capacitance change at 1 kHz as a function of temperature.
296x12(full_width) CBB153
105
104
103
102
101
10
100
101
102
3
f (Hz)
dissipation
factor
(x 10-4)
C = 10 nF
10 nF < C ≤ 47 nF
47 nF < C ≤ 220 nF
220 nF < C ≤ 1µF
Fig.6 Tangent of loss angle as a function of frequency: typical curves.
2002 Oct 07 9
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
Impedance
Resonant frequency
296x12(full_width)
10
8
CBB152
10
7
10
6
10
5
10
4
10
3
10
-2
10
-1
10
0
10
1
10
2
f (Hz)
Impedance
(Ω)
1.0 µF
330 nF
100 nF
47 nF
measured at body
long leads
Fig.7 Impedance as a function of frequency: typical curves for 20% values measured with 35 mm lead length.
296x12(full_width)
CBB113
1000 nF100 nF10 nF1nF
10
2
10
-1
10
0
10
1
C (nF)
f
(MHz)
Fig.8 Resonant frequency as a function of capacitance: typical curves for 20% values.
2002 Oct 07 10
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb ≤100 °C
296x12(full_width)
CBA723
10
5
10
4
10
3
10
2
10
1
10
3
10
1
10
2
AC voltage
(V)
f (Hz)
Fig.9 AC voltage (RMS value) as a function of frequency at Tamb ≤100 °C.
296x12(full_width) CBB114
10
10
10
10
10
105
104
103
102
101
3
-1
0
1
2
AC current
(mA)
f (Hz)
470 nF
100 nF
47 nF
10 nF
1000 nF
Fig.10 AC current (RMS value) as a function of frequency at Tamb ≤100 °C.
2002 Oct 07 11
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
Insulation resistance
APPLICATION NOTES
•For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage
of 275 V (AC) ±10% instability.
•These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 .....
•The maximum ambient temperature must not exceed 100 °C.
•Rated voltage pulse slope:
– If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by
385 V (DC) and divided by the applied voltage.
296x12(full_width) CBA204
020406080100
106
104
105
RC
(s)
Tamb(°C)
Fig.11 RC product as a function of ambient free air temperature: typical curve.
2002 Oct 07 12
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
MARKING
Product marking
The capacitors are marked (see Fig.12) with the following
information:
1. Rated capacitance code in accordance with
“IEC 60062”
2. Tolerance on rated capacitance; M =±
20%; K =±
10%
3. Rated (AC) voltage (e.g. 275 V)
4. Sub-class (e.g. X2)
5. Manufacturer’s type designation (e.g. 435)
6. Code for dielectric material (MKP) for capacitors with
original pitch =15, 22.5 and 27.5 mm
7. Manufacturer (BC) and manufacturer place
8. Year and week of manufacture (e.g. 0133) for capacitors
with original pitch =15, 22.5 and 27.5 mm.
144x12(halfpage) FRONT FACE
CBB278
470n M 275V~
435 MKP
BC PL0133 X2 02
Fig.12 Example of marking.
Package marking
The package containing the capacitors is marked as shown (see Fig.13).
Fig.13 Barcode label.
Barcode label marking
LINE MARKING EXPLANATION
1 Manufacturer’s name
2 Country of origin
3Sub-family
4 Type description and sub class
5 Capacitance value, tolerance, voltage and
climatic category (“IEC 60068-1”)
6 Safety approvals
7 Preference origin code: B
Country of origin in code: 780 (Poland)
Responsible production centre: PL
Work order: WO
8 Product type description
9 Quantity and production period, year and
week code
10 Product code (12NC)
2002 Oct 07 13
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
QUICK REFERENCE TEST REQUIREMENTS
TES T PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”
load 10 N; 10 s no visible damage
legible marking
|∆C/C|≤5%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Bending:
“IEC 60068-2-21”
load 5 N; 4 ×90 °
Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Rapid change of temperature:
“IEC 60068-2-14”
5 cycles
1cycle=30 minutes at −40 °C and
30 minutes at 100 °C|∆C/C|≤5%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Vibration:
“IEC 60068-2-6”
10 to 55 Hz;
amplitude 0.75 mm; 6 hours
Shock:
“IEC 60068-2-27”
half sinewave; 490 m/s2; 11 ms
Climatic sequence
Dry heat:
“IEC 60068-2-2”
16 hours; 100 °C
|∆C/C|≤5%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Rins ≥50% of specified value
Damp heat, cyclic, test Db,
first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”
2 hours; −40 °C
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Voltage proof:
“IEC 60384-14”
Vp=1200 V (DC); 1 minute
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”
56 days; 40 °C;
90 to 95% RH no load
Vp=1200 V (DC); 1 minute
|∆C/C|≤5%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Rins ≥50% of specified value
Endurance (AC):
“IEC 60384-14”
3×2.5 kV pulse voltage for X2;
1000 hours; 1.25 ×URac at 100 °C;
once per hour; 0.1 s; 1000 V (RMS) via
resistor of 47 Ω;
Vp=1200 V (DC); 1 minute
|∆C/C|≤
10%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Rins ≥50% of specified value
Charge and discharge:
“IEC 60384-14”
10000 cycles; 5 ms;
1.5 ×dV/dt
|∆C/C|≤10%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Rins ≥50% of specified value
Passive flammability:
“IEC 60384-14”
class C no burning
2002 Oct 07 14
BCcomponents Product Specification
Interference suppression film capacitors,
insulated leads MKP 435 X2
Note
1. Measuring frequency 10 kHz for C ≤1µF.
Active flammability:
“IEC 60384-14”
20 ×2.5 kV discharge no burning
Heat storage:
“IEC 60384-14”
1000 hours; 100 °C|∆C/C|≤5%
∆tan δ≤80 ×10−4(C ≤1µF); note 1
Active flammability test voltage proof up to 2 ×peak impulse
voltage of 4.13 or until breakdown
(100 V/sec, current limited 2mA)
failed capacitors connected to a
250 V (AC) power supply during
5 minutes
no burning
TES T PROCEDURE
(quick reference) REQUIREMENTS
