MODELS SQSxxA1, SQSxxB, SSNxxA, SSNxxB, SSWxxA, SSWxxB, SPDxxA, SPDxxB Isolated and bussed circuits Thin film resistor network RoHS compliant available FEATURES Precision Nichrome Resistors on Silicon Passivation coating provides protection in humid environments Industry Standard Packaging JEDEC 95 Ratio Tolerances < 0.05% TCR Tracking Tolerances < 5 ppm/C SCHEMATICS ELECTRICAL2 Standard Resistance Range3 1K ohms to 100K ohms (Isolated) 1K ohms to 30K ohms (Bussed) Resistor Tolerances 0.25% Ratio Tolerances 0.05% TCR Reference TCR table Operating Temperature Range -55C to +125C Interlead Capacitance < 2 pF Insulation Resistance = 10,000 Megohms Maximum Operating Voltage 100 Vdc or v PR Noise, Maximum (MIL-STD-202, Method 308) -25 dB Resistor Power Rating at 70C 1 2 0.1 Watts x X denotes package pin count. Reference package type section in this data sheet for description. Specifications subject to change without notice. 3 E96 codes available. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 28, 2008 page 1 of 4 BI technologies SQSxxA, SQSxxB, SSNxxA, SSNxxB, SSWxxA, SSWxxB, SPDxxA, SPDxxB PACKAGE POWER, WATTS @ 70C 4 QSOP SOIC (Narrow) SOIC (Wide) P-DIP 16 20 24 8 14 16 16 20 24 8 14 16 0.6 0.7 0.8 0.4 0.7 0.8 1.0 1.2 1.2 0.4 0.6 0.8 POWER DERATING CURVE ENVIRONMENTAL (MIL-R-83401) R 0.25% Thermal Shock plus Power Conditioning Short Time Overload R 0.1% Terminal Strength R 0.1% Moisture Resistance R 0.2% Mechanical Shock R 0.25% Vibration R 0.25% Low Temperature Operation R 0.05% High Temperature Exposure R 0.1% Resistance to Solder Heat R 0.1% Marking Permanency Per MIL-STD-202, Method 215 Flammability UL-94V-0 Rated Storage Temperature Range -55C to +125C MECHANICAL Lead Plating 80/20 Tin Lead (Standard) 100 matte Tin (RoHS) Lead Material Copper Alloy Lead Configuration Gull Wing Lead Coplanarity 0.004" (0.102 mm) Substrate Material Silicon Resistor Material Passivated Nichrome Body Material Molded Epoxy 4 Maximum power per resistor @ 70C is 100 mW, not to exceed package power. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 28, 2008 page 2 of 4 BI technologies SQSxxA, SQSxxB, SSNxxA, SSNxxB, SSWxxA, SSWxxB, SPDxxA, SPDxxB ORDERING INFORMATION 5 S QS 16 A XXXX F S LF 13 Bulk packaging option: 7=7" Tape & Reel 13 = 13" Tap e & Reel (No Code used for Tubes) Model Series: S = Passivated Nichrome on Silicon Package Type: Lead Finish: No Code=SnPb LF=Lead Free (RoHS) Lead Count: Circuit Type: A=Isolated B=Bussed TCR Code Tolerance Code Resistance Code PACKAGE TYPE Package Codes Lead count Mechanical Outline QSOP QS 16, 20, 24 MO-137 SOIC Narrow Body SN 8, 14, 16 MS-012 SOIC Wide Body SW 16, 20, 24 MS-013 P-DIP PD 8, 14, 16 MS-001 RESISTANCE5 First 3 digits are significant. Fourth digit denotes number of trailing zeros. For values less than 100, use "R" to denote a decimal point. Example, 51 and 10000 ohms is coded as 51R0 and 1002 respectively. Standard values follow E96. RESISTANCE TOLERANCE Accuracy Code at 25C CA CB D FA F G J Absolute Resistance Tolerances (%) 0.25 0.25 0.5 1.0 1.0 2.0 5.0 Ratio Tolerances (R1 Ref) (%) 0.05 0.1 0.1 0.05 1.0 N/A N/A TEMPERATURE COEFFICIENT OF RESISTANCE (TCR) TCR Code (-55C to 125C) Absolute (ppm/C) Tracking (R1 Ref) (ppm/C) Q P S L 25 50 100 200 5 5 N/A N/A 5 Contact customer service for custom designs and features. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 28, 2008 page 3 of 4 BI technologies SQSxxA, SQSxxB, SSNxxA, SSNxxB, SSWxxA, SSWxxB, SPDxxA, SPDxxB BULK PACKAGING OPTIONS Quantity Model + Pin Count 7" Reel 13" Reel Tubes SQS16 1000 2500 100 SQS20 1000 2500 50 SQS24 1000 2500 50 SSN08 1000 2500 100 SSN14 500 2500 50 SSN16 500 2500 50 SSW16 500 1500 50 SSW20 500 1500 38 SPD08 N/A N/A 50 SPD14 N/A N/A 25 SPD16 N/A N/A 25 TYPICAL MARKING BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 28, 2008 page 4 of 4 BI technologies