Surface Mount Rectifier Features: * * * * * Low Cost Low Leakage Low Forward Voltage Drop High Current Capability Easily Cleaned With Alcohol,Isopropanol And Similar Solvents Mechanical Data: * * * * * Case : JEDEC DO-214AA, molded plastic Terminals : Solderable per MIL-STD-202, Method 208 Polarity : Colour band denotes cathode Weight : 0.003oz, 0.093g Mounting position : Any Maximum Ratings and Electrical Characteristics: Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load,derate by 20%. Characteristics Symbol MURS160-13-F Units Maximum recurrent peak reverse voltage VRRM 600 V Maximum RMS voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum average forward rectified current at TA=110C IF(AV) 1 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load at TJ=125C IFSM 35 A Typical reverse recovery time (Note 1) trr 50 ns Maximum reverse current at TA=25C at rated DC blocking voltage at TA=125C IR 5 150 A Maximum instantaneous forward voltage at 1A VF 1.25 V RJA 13 C/W TJ, TSTG -55 to +150 C Typical thermal resistance (Note 2) Operating / Storage junction temperature range Note: (1) Measured with IF=0.5A, IR=1A, Irr=0.25A. (2) Junction to ambient. www.element14.com www.farnell.com www.newark.com Page <1> 26/02/13 V1.0 Surface Mount Rectifier www.element14.com www.farnell.com www.newark.com Page <2> 26/02/13 V1.0 Surface Mount Rectifier Dimensions: DO-214AA(SMB) Dimensions : Millimetres Part Number Table Description Part Number Surface Mount Rectifier MURS160-13-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 26/02/13 V1.0