PMEG2020AEA,115 - NEXPERIA

PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in

SOD323 (SC-76) package

23 September 2020 Product data sheet

1. General description

Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated

guard ring for stress protection, encapsulated in a SOD323 (SC-76) very small SMD plastic

package.

2. Features and benefits

•Forward current: 2 A

•Reverse voltage: 20 V

•Very low forward voltage

•Very small SMD package.

•AEC-Q101 qualified

3. Applications

•Low voltage rectification

•High efficiency DC/DC conversion

•Switch mode power supply

•Inverse polarity protection

•Low power consumption applications.

4. Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

IFforward current Tsp ≤ 55 °C [1] - - 2 A

VRreverse voltage Tj = 25 °C - - 20 V

VFforward voltage IF = 2 A; tp ≤ 300 µs; δ ≤ 0.02; pulsed;

Tj = 25 °C

- 450 525 mV

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.

5. Pinning information

Table 2. Pinning information

Pin Symbol Description Simplified outline Graphic symbol

1 K cathode

2 A anode

SOD323

sym001

K A

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

6. Ordering information

Table 3. Ordering information

PackageType number

Name Description Version

PMEG2020AEA SOD323 plastic, surface-mounted package; 2 leads; 1.3 mm pitch; 1.7

mm x 1.25 mm x 0.95 mm body

SOD323

7. Marking

Table 4. Marking codes

Type number Marking code

PMEG2020AEA S3

8. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC60134)

Symbol Parameter Conditions Min Max Unit

VRreverse voltage Tj = 25 °C - 20 V

IFforward current Tsp ≤ 55 °C [1] - 2 A

IFRM repetitive peak forward

current

tp ≤ 1 ms; δ ≤ 0.25 - 7 A

IFSM non-repetitive peak

forward current

tp = 8 ms; square wave - 9 A

Tjjunction temperature [2] - 150 °C

Tamb ambient temperature [2] -65 150 °C

Tstg storage temperature -65 150 °C

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.

[2] For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses PR are a

significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on

request.

9. Thermal characteristics

Table 6. Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

[1] [2] - - 450 K/WRth(j-a) thermal resistance from

junction to ambient

in free air

[3] [4] - - 210 K/W

Rth(j-sp) thermal resistance from

junction to solder point

[5] - - 90 K/W

[1] For Schottky barrier diodes thermal runaway has to be considered, as in some applications, the reverse power losses PR are a

significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on

request.

[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.

[3] For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses PR are a

significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on

request.

[4] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.

[5] Soldering point of cathode tab.

Product data sheet 23 September 2020 2 / 8

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

10. Characteristics

Table 7. Characteristics

Symbol Parameter Conditions Min Typ Max Unit

IF = 0.01 A; tp ≤ 300 µs; δ ≤ 0.02;

Tj = 25 °C

- 200 220 mV

IF = 0.1 A; tp ≤ 300 µs; δ ≤ 0.02;

Tj = 25 °C

- 265 290 mV

IF = 1 A; tp ≤ 300 µs; δ ≤ 0.02;

Tj = 25 °C

- 380 430 mV

VFforward voltage

IF = 2 A; tp ≤ 300 µs; δ ≤ 0.02; pulsed;

Tj = 25 °C

- 450 525 mV

VR = 5 V; pulsed; Tj = 25 °C - 15 50 µA

VR = 10 V; Tj = 25 °C [1] - 20 80 µA

IRreverse current

VR = 20 V; Tj = 25 °C - 50 200 µA

Cddiode capacitance VR = 5 V; f = 1 MHz; Tj = 25 °C - 55 70 pF

[1] Pulsed test: tp ≤ 300 μs; δ ≤ 0.02

(3)

mdb823

104

103

102

10- 1

(mA)

0.50 0.1 0.2 0.3 0.4 VF (V)

(1) (2) (4)

(1) Tamb = 125 °C

(2) Tamb = 85 °C

(3) Tamb = 25 °C

(4) Tamb = -40 °C

Fig. 1. Forward current as a function of forward

voltage; typical values

mdb825

10- 4

10- 2

102

10- 5

10- 3

10- 1

(mA)

10- 6

VR (V)

0 20155 10

(1)

(3)

(2)

(4)

(1) Tamb = 125 °C

(2) Tamb = 85 °C

(3) Tamb = 25 °C

(4) Tamb = -40 °C

Fig. 2. Reverse current as a function of reverse

voltage; typical values

Product data sheet 23 September 2020 3 / 8

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

mdb824

200

150

100

(pF)

0 5 10 2015 VR (V)

f = 1 MHz; Tamb = 25 °C

Fig. 3. Diode capacitance as a function of reverse voltage; typical values

11. Test information

006aaa812

duty cycle δ =

Fig. 4. Duty cycle definition

Quality information

This product has been qualified in accordance with the Automotive Electronics Council (AEC)

standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in

automotive applications.

Product data sheet 23 September 2020 4 / 8

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

12. Package outline

03-12-17Dimensions in mm

0.25

0.10

0.45

0.15

2.7

2.3

1.8

1.6

0.40

0.25

1.1

0.8

1.35

1.15

Fig. 5. Package outline SOD323

13. Soldering

0.951.65

2.2

2.1

3.05

solder lands

solder resist

occupied area

solder paste

0.5

(2×)

0.6

(2×)

0.6 (2×)0.5 (2×)

sod323_fr

Dimensions in mm

Fig. 6. Reflow soldering footprint for SOD323

1.5 (2×)

2.9

1.2

(2×)

2.75

sod323_fw

solder lands

solder resist

occupied area

preferred transport

direction during soldering

Dimensions in mm

Fig. 7. Wave soldering footprint for SOD323

Product data sheet 23 September 2020 5 / 8

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

14. Revision history

Table 8. Revision history

Data sheet ID Release date Data sheet status Change notice Supersedes

PMEG2020AEA v.2 20200923 Product data sheet - PMEG2010BEA v.1

Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines of

Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

•Automotive qualification added in sections: Features and benefits,Test information and Legal

information

PMEG2020AEA v.2 20040226 Product data sheet - -

Product data sheet 23 September 2020 6 / 8

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

15. Legal information

Data sheet status

Document status

[1][2]

Product

status [3]

Definition

Objective [short]

data sheet

Development This document contains data from

the objective specification for

product development.

Preliminary [short]

data sheet

Qualification This document contains data from

the preliminary specification.

Product [short]

data sheet

Production This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use in automotive applications — This Nexperia product

has been qualified for use in automotive applications. Unless otherwise

agreed in writing, the product is not designed, authorized or warranted to

be suitable for use in life support, life-critical or safety-critical systems or

equipment, nor in applications where failure or malfunction of an Nexperia

product can reasonably be expected to result in personal injury, death or

severe property or environmental damage. Nexperia and its suppliers accept

no liability for inclusion and/or use of Nexperia products in such equipment or

applications and therefore such inclusion and/or use is at the customer's own

risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Product data sheet 23 September 2020 7 / 8

Nexperia PMEG2020AEA

20 V, 2 A very low VF MEGA Schottky barrier rectifier in SOD323 (SC-76) package

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Applications.................................................................. 1

4. Quick reference data....................................................1

5. Pinning information......................................................1

6. Ordering information....................................................2

7. Marking.......................................................................... 2

8. Limiting values............................................................. 2

9. Thermal characteristics............................................... 2

10. Characteristics............................................................ 3

11. Test information.......................................................... 4

12. Package outline.......................................................... 5

13. Soldering..................................................................... 5

14. Revision history..........................................................6

15. Legal information........................................................7

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 23 September 2020

Product data sheet 23 September 2020 8 / 8