METAL OXIDE VARISTORS TNRTM
CAT. No. E1006Q
?FEATURES
@Coating resin is highly non-flammability.
@Coating resin doesn't burn under the flammability test of UL.
@Little scatter at the destruction under over voltage.
@Pb free for RoHS directives.
@Halogen free (Coating resin doesn't contain Halogen).
@Strong to thermal shock (-40C -85C, 100 cycles).
@Safety approvals (UL, CSA, VDE)
UL1449 File : E95427
UL1414 FIle : E65426
CSA File : LR97864
VDE File : 118623
?APPLICATIONS
@Protection for semiconductors from over voltage.
@Protection for electronic instruments from lightning surge.
@Absorption of on-off surge from motors and relays.
?PART NUMBERING SYSTEM
Our newly developed TNR SV series is to prevent from being caught fire even very
high surge energy is applied.
Thus electric appliance using TNR SV series can be much safer like TNR SE series.
?CAUTIONS and WARNINGS
Varistors may be short-circuit or be destroyed, in case of absorbing over rating voltage or over rating surge.
Please connect a current fuse less than 7A rating or a circuit breaker in series with varistors.
Operating Temperature Range: -40 to +85C
Storage Temperature Range: -50 to +125C
Design Code
Lead Forming / Taping
Packing Style (Taping)
Varistor Volt. Tolerance6
Varistor Voltage5
Series4
Element Diameter3
Product Form2
Category1
T N D 1 0 S V 4 7 1 K T L P A A 0B
13426789105121311 16 17 181514
3Element Diameter
10
14 F10 mm
F14 mm
5Varistor Voltage
The first two digits are significant figures
and the third one denotes the number of
following zeros.
4Series
SV SV Series
2Product Form
ND Disk Type
6Varistor Volt. Tolerance
KP10%
1Category
TMetal Oxide
Varistors
TNR
RoHS
Compliant
(1/5)
METAL OXIDE VARISTORS TNRTM
CAT. No. E1006Q
Maximum Ratings
(V) (A) (V)
Max.
Clamping
Voltage
Capacitance
Typical
@1kHz
Varistor Voltage
V
1mA
(pF)
Part Number
(W) 2ms(J) DC (V)
Rated
Wattage
Max.
Energy
Previous
Part Number
(Just for your reference)
Thickness
T
MAX.
140
150
175
275
300
320
385
140
150
175
275
300
320
385
180
200
225
350
385
410
505
180
200
225
350
385
410
505
3,500A/1 time
2,500A/2 times
6,000A/1 time
5,000A/2 times
5,000A/1 time
4,500A/2 times
27.5
30
35
55
60
67
67
55
60
70
110
125
136
136
0.4
0.6
25
50
360
395
455
710
775
845
1025
360
395
455
710
775
845
1,025
220 ( 198K242)
240 ( 216K264)
270 ( 247K303)
430 ( 387K473)
470 ( 423K517)
510 ( 459K561)
620 ( 558K682)
220 ( 198K242)
240 ( 216K264)
270 ( 247K303)
430 ( 387K473)
470 ( 423K517)
510 ( 459K561)
620 ( 558K682)
450
400
350
240
220
210
180
850
800
700
460
420
390
330
6.4
6.5
6.7
7.5
7.7
7.9
8.6
6.4
6.5
6.7
7.5
7.7
7.9
8.6
TNR10SV221K317-T71
TNR10SV241K317-T71
TNR10SV271K317-T71
TNR10SV431K317-T71
TNR10SV471K317-T71
TNR10SV511K317-T71
TNR10SV621K317-T71
TNR14SV221K317-T71
TNR14SV241K317-T71
TNR14SV271K317-T71
TNR14SV431K317-T71
TNR14SV471K317-T71
TNR14SV511K317-T71
TNR14SV621K317-T71
TND10SV221KTLBPAA0
TND10SV241KTLBPAA0
TND10SV271KTLBPAA0
TND10SV431KTLBPAA0
TND10SV471KTLBPAA0
TND10SV511KTLBPAA0
TND10SV621KTLBPAA0
TND14SV221KTLBPAA0
TND14SV241KTLBPAA0
TND14SV271KTLBPAA0
TND14SV431KTLBPAA0
TND14SV471KTLBPAA0
TND14SV511KTLBPAA0
TND14SV621KTLBPAA0
8/20ms(A)
AC (Vrms)
Max. Peak
Current
Max. Allowable
Voltage
?DIMENSIONS [mm]
?RATINGS AND CHARACTERISTICS
TND10SV/TND14SV : Taping Products only
Symbol
Taping Code: TLB10SV 14SV
D
fd
P
P0
fD0
P1
W1
F0
dh
dP
W
W0
W2
t
H0
H
H1
J
13.0
0.8P0.05
15.0P1.0
15.0P0.3
4.0P0.2
3.75P0.5
9.0P0.5
7.5P0.8
0P2.0
0P1.3
18.0
5.0 MIN.
3.0 MAX.
0.6P0.3
20.0 MAX.
19.0P1.0
46.5 MAX.
6.0 MAX.
16.5
30.0P1.0
27.0 MAX.
+1.0
-
0.5
H1
P0
P1
W0 W2
W
t
FD0
Fd
DPDPDh
T
F
W1
1.0 MAX.
HH0
J
(2/5)
METAL OXIDE VARISTORS TNRTM
CAT. No. E1006Q
?V-I CURVE
V-I characteristics is same as that of V series.
Please see V-I Curve of V series.
CROSS REFERENCE TABLE
TNR SV SERIES TNR V SERIES
TND10SV221KTLBPAA0
TND10SV241KTLBPAA0
TND10SV271KTLBPAA0
TND10SV431KTLBPAA0
TND10SV471KTLBPAA0
TND10SV511KTLBPAA0
TND10SV621KTLBPAA0
TND14SV221KTLBPAA0
TND14SV241KTLBPAA0
TND14SV271KTLBPAA0
TND14SV431KTLBPAA0
TND14SV471KTLBPAA0
TND14SV511KTLBPAA0
TND14SV621KTLBPAA0
TND10V221K
TND10V241K
TND10V271K
TND10V431K
TND10V471K
TND10V511K
TND10V621K
TND14V221K
TND14V241K
TND14V271K
TND14V431K
TND14V471K
TND14V511K
TND1SV621K
(3/5)
METAL OXIDE VARISTORS TNRTM
CAT. No. E1006Q
?GENERAL SPECIFICATIONS
?RELIABILITY CHARACTERISTICS
Test Conditions Specifications
Item
Standard Test
Condition
Varistor Voltage
Maximum Allowable
Voltage
Maximum Peak
Surge Current
Energy Rating
Rated Wattage
Maximum Clamping
Voltage
Capacitance
Voltage Temperature
Coefficient
Insulation
20P5C, 65P20
%RH
unless specified.
However, if it does not affect test result,
the condition can be 20P15C, 65P20
%RH
also.
The voltage between the two terminals measured at 1mA DC is called Varistor Voltage.
The measurement shall be made as fast as possible to avoid heat affection.
Maximum continuous AC voltage (50 to 60Hz/AC) and maximum DC voltage which can be
applied.
Maximum surge current (8/20Ms pulse wave to be applied once, or twice, 2 minutes apart) for
varistor voltage change within P10% of the initial value.
Maximum energy (2ms square wave to be applied once) for varistor voltage change within
P10% of the initial value.
Maximum power (50 to 60Hz/AC power to be applied for 1,000 hours at 85P2C) for varistor
voltage change within P10% of the initial value.
Maximum voltage across varistor when 8/20Ms rated current surge is applied.
Varistor's capacitance at 1kHz, standard test condition.
V1mA : Actual Varistor Voltage
Short circuit the two leads of varistor, and put the varistor body into lead balls (1.6mm
diameter) leaving 2mm epoxy coating outside. Then, apply 2.5kVrms between the leads and
the lead balls for 60P5 sec..
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
For reference only.
Within P0.05%/C
The varistor shall withstand
with no abnormality.
V1mA at 85C – V1mA at 25C1
V1mA at 25C60 B100 (%/C)
B
Test Conditions Specifications
Item
Heat Cycle
High Temperature
Exposure
Damp Heat
(Humidity)
High Temperature
Operation
Subject varistor to the following temperature cycles. -40C for 30 minutes Normal room
temperature for 10 minutes 85C for 30 minutes Normal room temperature for 10 minutes.
This completes one cycle. The cycle shall be repeated 100 times total. After the cycles, the
varistor shall be stored at normal room temperature for one hour. Then check the varistor
voltage and the appearance.
Store varistor at 125C for 1,000 hours. After that, store the varistor at normal room
temperature for one hour. Then check the varistor voltage.
Store at 40C, 90 to 95
%RH
for 1,000 hours. After that, store the varistor at normal room
temperature for one hour. Then cheek the varistor voltage.
Apply maximum applied voltage to varistor at 85C for 1,000 hours. After that, store the varistor
at normal room temperature for one hour. Then check the varistor voltage.
DV1mA [P5%
No appearance abnormality.
DV1mA [P5%
DV1mA [P5%
DV1mA [P10%
Operating Temperature Range: -40 to +85C
Storage Temperature Range: -50 to +125C
(4/5)
METAL OXIDE VARISTORS TNRTM
CAT. No. E1006Q
?MECHANICAL CHARACTERISTICS
Test Conditions Specifications
Item
Resistance to
Soldering Heat
Solderability
Lead Pull Strength
Lead Bend Strength
Vibration
Flammability test
Each lead shall be dipped into a solder bath having a temperature of 350P10C to a point 2.0
to 2.5 mm from the body of the unit, be held there for 3 sec and then be stored at room
temperature for 1 to 2 hours. The DV
1
mA and mechanical damage shall be examined.
or
Each lead shall be dipped into a solder bath having a temperature of 260P10C to a point 2.0
to 2.5 mm from the body of the unit, be held there for 10P1 sec and then be stored at room
temperature for 1 to 2 hours. The DV
1
mA and mechanical damage shall be examined.
Fix varistor body, and suspend specified weight toward direction of lead axis.
The varistor shall be secured with its terminal kept vertical and the force specified below shall
be applied in the axial direction.
The terminal shall gradually be bend by 90 in one direction then back to original position.
The damage of the terminal shall be visually examined.
Mount varistor body on vibrator, and conduct the follwing vibration test.
Peak-to-Peak amplitude : 1.5mm
Vibration frequency range : 10 to 55Hz
Sweeping time:
Approximately one minute for 10Hz 55Hz 10Hz
Direction and duration of vibration :
Three directions of X, Y and Z. Two hours each.
Six hours total.
The varistor shall be subjected to 60 sec. applications of test flame.
Burner : Bunsen gas burner 9000kcal / m3
Diameter of flame nozzle : F9.5 mm
Position : The specimen shall be fixed horizontal.
Point of application shall be approximately center of the specimen.
DV
1
mA [P5%
No remarkable damage
At least, 95% of the leads
shall be covered with
solder uniformly.
No abnormality such as
disconnection.
DV
1
mA [P5%
No remarkable damage as
remarkable the inner
ceramic element or
terminal open.
No remarkable appearance
abnormality.
DV
1
mA P5%
No catching fire, and no
flaming drops.
Lead diameter
F0.6mm, F0.8mm Force
10 N
Lead diameter
F0.6mm, F0.8mm Force
2.5 N
+1
-
0
Each lead shall be dipped into a methanol solution (about 25%) of rosin for 5 to 10 sec.
Then each lead shall be dipped into a solder.
Solder
Solder Temp.
Dipping Time
Dipping Depth
Pb free (Sn-3.0Ag-0.5Cu)
245P5C2P0.5sec.
1.5 to 2.0mm (from the body)
Eutectic (Sn/Pb)
235P5C
(5/5)
