DS14C88 QUAD CMOS Line Driver General Description The DS14C88, pin-for-pin compatible to the DS1488/ MC1488, is a quad line drivers designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). This device translates standard TTL/ CMOS logic levels to levels conforming to EIA-232-D and CCITT V.28 standards. The device is fabricated in low threshold CMOS metal gate technology. The device provides very low power consumption compared to its bipolar equivalents: 500 A (DS14C88) versus 25 mA (DS1488). The DS14C88 simplifies designs by eliminating the need for external slew rate control capacitors. Slew rate control in accordance with EIA-232D is provided on-chip, eliminating the output capacitors. Features n n n n Meets EIA-232D and CCITT V.28 standards LOW power consumption Wide power supply range: 5V to 12V Available in SOIC package Connection Diagram DS011105-1 Order Number DS14C88N, or DS14C88M See NS Package Number N14A or M14A (c) 1998 National Semiconductor Corporation DS011105 www.national.com DS14C88 QUAD CMOS Line Driver May 1998 Absolute Maximum Ratings (Note 1) Lead Temperature (Soldering 4 seconds) +260C Storage Temperature Range -65C to +150C This Product does not meet 2000V ESD rating. (Note 9) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage V+ Pin V- Pin Driver Input Voltage Recommended Operating Conditions +13V -13V (V+) +0.3V to GND -0.3V Driver Output Voltage |(V+) - VO| 30V |(V-) - VO| 30V Continuous Power Dissipation @+25C (Note 2) N Package 1513 mW M Package 1063 mW Junction Temperature +150C Min V+ Supply (GND = 0V) V- Supply (GND = 0V) Max Units +4.5 +12.6 V -4.5 -12.6 V Operating Free Air Temp. (TA) DS14C88 0 +75 C Electrical Characteristics Over Recommended Operating Conditions, unless otherwise specified Symbol Parameter Conditions Min Typ Max Units +10 A IIL Maximum Low Input Current VIN = GND IIH Maximum High Input Current VIN = V+ VIL Low Level Input Voltage V+ +7V, V- -7V GND 0.8 V V+ < +7V, V- > -7V GND 0.6 V 2.0 V+ V VIH VOL VOH High Level Input Voltage Low Level Output Level High Level Output Level VIN = VIH RL = 3 k V = 4.5V, V- = -4.5V V+ = 9V, V- = 9V or 7 k VIN = VIL V+ = 12V, V- = -12V V+ = 4.5V, V- = -4.5V V+ = 9V, V- = -9V RL = 3 k IOS+ IOS- -10 + Circuit Current (Note 3) or 7 k V+ = 12V, V- = -12V VIN = 0.8V, VO = GND V+ = +12V, V- = -12V Low Level Output Short VIN = 2.0V, VO = GND High Level Output Short A -4.0 -3.0 V -8.0 -6.5 V -10.5 -9.0 V 3.0 4.0 V 6.5 8.0 V 9.0 10.5 V -45 mA +45 mA Circuit Current (Note 3) ROUT ICC+ Output Resistance Positive Supply Current V+ = V- = GND = 0V 30 A 60 A V+ = 4.5V, V- = -4.5V 50 A V+ = 9V, V- = -9V V+ = 12V, V- = -12V V+ = 4.5V, V- = -4.5V 300 A 500 A -10 A V+ = 9V, V- = -9V V+ = 12V, V- = -12V V+ = 4.5V, V- = -4.5V -10 A -10 A -30 A V+ = 9V, V- = -9V V+ = 12V, V- = -12V -30 A -60 A VIN = VIHmin RL = OPEN ICC- Negative Supply Current VIN = VILmax RL = OPEN VIN = VIHmin RL = OPEN www.national.com 300 -2V VO +2V (Note 4) (Figure 1 ) VIN = V+ = 4.5V, V- = -4.5V VILmax V+ = 9V, V- = -9V RL = OPEN V+ = 12V, V- = -12V 2 10 A Switching Characteristics (Notes 5, 6) Over Recommended Operating Conditions, unless otheriwse specified (Figures 2, 3) Symbol tPLH Parameter Conditions V+ = +4.5V, V- = -4.5V V+ = +9.0V, V- = -9.0V V+ = +12V, V- = -12V Propagation Delay Low to High tPHL Min V+ = +4.5V, V- = -4.5V V+ = +9.0V, V- = -9.0V V+ = +12V, V- = -12V Propagation Delay High to Low Typ Max Units 1.5 6.0 s 1.2 5.0 s 1.2 4.0 s s 1.5 6.0 1.35 5.0 s 1.3 4.0 s tr Rise Time (Note 7) 0.2 1.0 tf Fall Time (Note 7) 0.2 1.0 s tsk Typical Propagation 250 ns V+ = +4.5V, V- = -4.5V V+ = +9.0V, V- = -9.0V V+ = +12V, V- = -12V Delay Skew SR s 200 ns 150 ns RL = 3 k to 7 k CL = 15 pF to 2500 pF Output Slew Rate (Note 7) 30 V/s Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" specify conditions for device operation. Note 2: Derate N Package 12.1 mW/C, and M Package 8.5 mW/C above +25C. Note 3: IOS+ and IOS- values are for one output at a time. If more than one output is shorted simultaneously, the device dissipation may be exceeded. Note 4: Power supply (V+, V-) and GND pins are connected to ground for the Output Resistance Test (RO). Note 5: AC input test waveforms for test purposes: tr = tf 20 ns, VIH = 2V, VIL = 0.8V (0.6V at V+ = 4.5V, V- = -4.5V) Note 6: Input rise and rall times must not exceed 5 s. Note 7: The output slew rate, rise time, and fall time are measured from the +3.0V to the -3.0V level on the output waveform. Note 8: CL include jig and probe capacitances. Note 9: ESD Rating (HBM, 1.5 k, 100 pF) 1.0 kV. Parameter Measure Information DS011105-2 FIGURE 1. Output Resistance Test Circuit (Power-Off) DS011105-3 FIGURE 2. Driver Load Circuit (Note 8) 3 www.national.com Parameter Measure Information (Continued) DS011105-4 FIGURE 3. Driver Switching Waveform Typical Application Information DS011105-5 FIGURE 4. EIA-232D Data Transmission www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted Order Number DS14C88M or DS14C88TM NS Package Number M14A Order Number DS14C88N or DS14C88TN NS Package Number N14A 5 www.national.com DS14C88 QUAD CMOS Line Driver LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Francais Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. National P/N DS14C88 - QUAD CMOS Line Driver See Displays Products Products > Analog - Interface > Data Transmission Circuits > RS-232 Serial Port Devices(Drivers or Receivers) > DS14C88 DS14C88 Product Folder QUAD CMOS Line Driver Generic P/N 14C88 General Description Features Package & Models Datasheet Parametric Table Samples & Pricing Application Notes Parametric Table Number of Drivers 4 Supply Voltage 12 V Number of Receivers 0 Process CMOS Datasheet Size in Date Kbytes Title DS14C88 QUAD CMOS Line Driver DS14C88 QUAD CMOS Line Driver (JAPANESE) View Online Download 1287 Oct- View Online Kbytes 98 Download 176 Kbytes Download View Online Receive via Email Receive via Email Receive via Email If you have trouble printing or viewing PDF file(s), see Printing Problems. Package Availability, Models, Samples & Pricing Part Number Package Type Status Pins MSL Budgetary Samples & Std Pricing Electronic Pack Orders SPICE IBIS Qty $US each Size Models DS14C88M SOIC NARROW 14 MSL Full production N/A N/A DS14C88MX SOIC NARROW 14 MSL Full production N/A N/A MDIP 14 MSL Full production N/A N/A DS14C88N 24 Hour Samples Buy Now Buy Now 24 Hour Samples Buy Now 1K+ $0.3700 1K+ $0.3700 1K+ $0.3700 rail of 55 Package Marking [logo]UZ2T DS14C88M reel [logo]UZ2T of DS14C88M 2500 rail of 25 [logo]UZ3T DS14C88N file:///H|/imaging/BITTING/cpl/20020808_1/08062002_10/NATL/08062002_HTML/DS14C88.html (1 of 2) [Aug-08-2002 6:23:27 PM] National P/N DS14C88 - QUAD CMOS Line Driver Die Full production Wafer Full production DS14C88 MDC DS14C88 MWC N/A N/A N/A Samples N/A tray of N/A - wafer jar of N/A - General Description The DS14C88, pin-for-pin compatible to the DS1488/MC1488, is a quad line drivers designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). This device translates standard TTL/CMOS logic levels to levels conforming to EIA-232-D and CCITT V.28 standards. The device is fabricated in low threshold CMOS metal gate technology. The device provides very low power consumption compared to its bipolar equivalents: 500 A (DS14C88) versus 25 mA (DS1488). The DS14C88 simplifies designs by eliminating the need for external slew rate control capacitors. Slew rate control in accordance with EIA-232D is provided on-chip, eliminating the output capacitors. Features Meets EIA-232D and CCITT V.28 standards LOW power consumption Wide power supply range: 5V to 12V Available in SOIC package Application Notes Title Size in Kbytes Date Receive via Email View Online Download AN-438: Application Note 438 Low 205 Kbytes Power RS-232C Driver and Receiver in CMOS 5-Oct-98 View Online Download Receive via Email AN-739: RS-232C Interface with COP800 5-Aug-95 View Online Download Receive via Email 312 Kbytes If you have trouble printing or viewing PDF file(s), see Printing Problems. [Information as of 5-Aug-2002] Search Design Purchasing Quality Company Home About Languages . Website Guide . About "Cookies" . National is QS 9000 Certified . Privacy/Security Statement . Contact Us . Site Terms & Conditions of Use . Copyright 2002 (c) National Semiconductor Corporation . My Preferences . Feedback file:///H|/imaging/BITTING/cpl/20020808_1/08062002_10/NATL/08062002_HTML/DS14C88.html (2 of 2) [Aug-08-2002 6:23:27 PM]