July 2007 Rev 1 1/9
9
BD241A-A
NPN power transistor
Features
■This device is qualified for automotive
application
■NPN transistor
Applications
■Audio, general purpose switching and amplifier
transistors
Description
The devices are manufactured in Planar
technology with “Base Island” layout. The
resulting transistor shows exceptional high gain
performance coupled with very low saturation
voltage.
.
Figure 1. Internal schematic diagram
123
TO-220
www.st.com
Table 1. Device summary
Order code Marking Package Packaging
BD241A-A BD241A TO-220 Tube
Obsolete Product(s) - Obsolete Product(s)
Absolute maximum ratings BD241A-A
2/9
1 Absolute maximum ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCER Collector-emitter voltage (RBE = 100Ω) 70 V
VCEO Collector-emitter voltage (IB = 0) 60 V
VEBO Emitter-base voltage (IC = 0) 5 V
ICCollector current 3 A
ICM Collector peak current (tp < ms) 5 A
IBBase current 1 A
PTOT Total dissipation at Tcase = 25°C 40 W
Tstg Storage temperature -65 to 150 °C
TJMax. operating junction temperature 150 °C
Obsolete Product(s) - Obsolete Product(s)
BD241A-A Electrical characteristics
3/9
2 Electrical characteristics
(Tcase = 25°C; unless otherwise specified)
2.1 Electrical characteristic (curves)
Table 3. Electrical characteristics
Symbol Parameter Test Conditions Min. Typ. Max. Unit
ICES
Collector cut-off current
(VBE = 0) VCE = rated VCEO 0.2 mA
ICEO
Collector cut-off current
(IB = 0)
for BD241A VCE =30V
for BD241C VCE =60V
0.3
0.3
mA
mA
IEBO
Emitter cut-off current
(IC = 0) VEB =5V 1mA
VCEO(sus)(1)
1. Pulsed duration = 300 ms, duty cycle ≥1.5%.
Collector-emitter
sustaining voltage
(IB = 0)
IC =30mA
for BD241A
for BD241C
60
100
V
V
VCE(sat)(1) Collector-emitter
saturation voltage IC =3A _ IB =0.6A 1.2 V
VBE(1) Base-emitter voltage IC =3A VCE =4V 1.8 V
hFE(1) DC current gain IC =1A VCE =4V
IC =3A VCE =4V
25
10
Figure 2. Safe operating area Figure 3. Derating curve
Obsolete Product(s) - Obsolete Product(s)
Electrical characteristics BD241A-A
4/9
Figure 4. DC current gain Figure 5. DC current gain
Figure 6. Collector-emitter saturation
voltage
Figure 7. Base-emitter saturation
voltage
Figure 8. Base-emitter on voltage
Figure 9. Resistive load switching time
Obsolete Product(s) - Obsolete Product(s)
BD241A-A Electrical characteristics
5/9
2.2 Test circuits
Figure 11. Resistive load switching test circuit
Figure 10. Resistive load switching time
1) Fast electronic switch
2) Non-inductive resistor
Obsolete Product(s) - Obsolete Product(s)
Package mechanical data BD241A-A
6/9
3 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in compliance
with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also
marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are
available at: www.st.com
Obsolete Product(s) - Obsolete Product(s)
BD241A-A Package mechanical data
7/9
DIM.
mm.
MIN. TYP MAX.
A 4.40 4.60
b 0.61 0.88
b1 1.14 1.70
c 0.49 0.70
D 15.25 15.75
D1 1.27
E 10 10.40
e 2.40 2.70
e1 4.95 5.15
F 1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L13 14
L1 3.50 3.93
L20 16.40
L30 28.90
øP 3.75 3.85
Q 2.65 2.95
TO-220 Mechanical data
Obsolete Product(s) - Obsolete Product(s)
Revision history BD241A-A
8/9
4 Revision history
Table 4. Revision history
Date Revision Changes
10-Jul-2007 1 Initial Release
Obsolete Product(s) - Obsolete Product(s)
BD241A-A
9/9
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at an
y
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
y
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Obsolete Product(s) - Obsolete Product(s)
