TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 68400 44, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-166 6, Fax: (978) 6890803
Website: http://www.microsemi.com
SURFACE MOUNT 3000 Watt
Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Available in both J-bend and Gull-wing terminations
- Selections for 5.0 to 170 V standoff voltages (VWM)
DEVICES MSMLJ5.0A thru MSMLJ170CA, e3
and MSMLG5.0A thru MSMLG170CA, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes specify
various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129
for more details on the screening options.
Axial-lead equivalent packages for thru-hole mounting available as M5KP5.0A to M5KP110CA with 5000 W
rating, (consult factory for other surface mount options)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current I
D
APPLICATIONS / BENEFITS
Suppresses transients up to 3000 watts @ 10/1000 µs
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:
o Class 1 & 2: MSML5.0A to MSML 170ACA
o Class 3: MSML5.0A to MSML150CA
o Class 4: MSML5.0A to MSML75CA
Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:
o Class 1: MSML5.0A to MSML170CA
o Class 2: MSML5.0A to MSML90CA
o Class 3: MSML5.0A to MSML48CA
o Class 4: MSML5.0A to MSML24CA
Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:
o Class 2: MSML5.0A to MSML43CA
o Class 3: MSML5.0A to MSML22CA
o Class 4: MSML5.0A to MSML10CA
MAXIMUM RAT INGS
Peak Pulse Power dissipation at 25 ºC: 3000 watts at 10/1000 μs (also see Figures 1,2, and 3) with
impulse repetition rate (duty factor) of 0.01 % or less
t
clamping
(0 V to V
BR
min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65 ºC to +150 ºC
Thermal resistance: 17.5 ºC/W junction to lead, or 77.5 ºC/W junction to ambient when mounted on FR4
PC board (1 oz Cu) with recommended footprint Steady-State Power dissipation: 6 watts at TL = 45 ºC, or
1.61 watts at TA = 25 ºC when mounted on FR4 PC board with recommended footprint (see page 2)
Forward Surge at 25 ºC: 200 Amps peak impulse of 8.3 ms half-sine wave (unidirectional only)
Solder temperatures: 260 ºC for 10 s (maximum)
Refer to table below
for dime nsions
RF01003 Rev B, Sept 2011 High Reliability Product Group Page 1 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 68400 44, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
MECHANICAL AND PACKAGING
Void-free transfer molded thermosetting epoxy body meeting UL94V-0
Gull-wing or J-bend tin-lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) compliant annealed matte-tin plating
solderable per MIL-STD-750, method 2026
Cathode indicated by band. No cathode band on bi-directional devices.
Part number marked on package
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL option available with up to 750 per 7 inch reel or up to 2500 per 13 inch reel EIA-481-B with 16
mm tape. Add “TR” suffix to part number.
Weight: 0.25 gram (approximately)
PACKAGE DIMENSIO NS
(
SMLJ
)
(
SMLG
)
PAD LAYOUT
DIMENSIONS IN INCHES
A
BCDE F
K
L
MIN .115 .260 .220 .305 .077 .380 .025 .030
MAX .121 .280 .245 .320 .110 .400 .040 .060
DIMENSIONS IN MILLIMETERS
MIN 2.92 6.60 5.59 7.75 1.95 9.65 0.635 .760
MAX 3.07 7.11 6.22 8.13 2.80 10.16 1.016 1.520
Typical Standoff Height: 0.004” – 0.008” (0.1mm – 0.2mm)
(
DO-214AB
)
(
DO-215AB
)
IN CHES mm
A 0.390 9.90
B 0.110 2.79
C 0.150 3.81
INCHES mm
A 0.510 12.95
B 0.110 2.79
C 0.150 3.81
SYMBOLS & DEFINITI ONS
Symbol
Definition
Symbol
Definition
VWM Working Peak (Standoff) Voltage IPP Peak Pulse Current
PPP Peak Pulse Power VCClamping Voltage
VBR Breakdown Voltage IBR Breakdown Current for VBR
ID Standby Current
SMLG
(
DO-215AB
)
SMLJ
(
DO-214AB
)
RF01003 Rev B, Sept 2011 High Reliability Product Group Page 2 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 68400 44, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI PART NUMBER
REVERSE
STAND-OFF
VOLTAGE
VWM
BREAKDOWN VOLTAGE
VBR @ IBR
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
PEAK PULSE
CURRENT
(see Fig. 2)
IPP
MAXIMUM
STANDBY
CURRENT
ID @ VWM
GULL-WING J- BEND V V mA V A
μ
A
MSMLG5.0A
MSMLG6.0A
MSMLJ5.0A
MSMLJ6.0A
5.0
6.0
6.40 – 7.00
6.67 – 7.37
10
10
9.2
10.3
326.0
291.3
1000
1000
MSMLG6.5A
MSMLG7.0A
MSMLJ6.5A
MSMLJ7.0A
6.5
7.0
7.22 – 7.98
7.78 – 8.60
10
10
11.2
12.0
267.9
250.0
500
200
MSMLG7.5A
MSMLG8.0A
MSMLJ7.5A
MSMLJ8.0A
7.5
8.0
8.33 – 9.21
8.89 – 9.83
1
1
12.9
13.6
232.6
220.6
100
50
MSMLG8.5A
MSMLG9.0A
MSMLJ8.5A
MSMLJ9.0A
8.5
9.0
9.44 – 10.4
10.0 – 11.1
1
1
14.4
15.4
208.4
194.8
25
10
MSMLG10A
MSMLG11A
MSMLJ10A
MSMLJ11A
10
11
11.1 – 12.3
12.2 – 13.5
1
1
17.0
18.2
176.4
164.8
5
5
MSMLG12A
MSMLG13A
MSMLJ12A
MSMLJ13A
12
13
13.3 – 14.7
14.4 – 15.9
1
1
19.9
21.5
150.6
139.4
5
5
MSMLG14A
MSMLG15A
MSMLJ14A
MSMLJ15A
14
15
15.6 – 17.2
16.7 – 18.5
1
1
23.2
24.4
129.4
123.0
2
2
MSMLG16A
MSMLG17A
MSMLJ16A
MSMLJ17A
16
17
17.8 – 19.7
18.9 – 20.9
1
1
26.0
27.6
115.4
106.6
2
2
MSMLG18A
MSMLG20A
MSMLJ18A
MSMLJ20A
18
20
20.0 – 22.1
22.2 – 24.5
1
1
29.2
32.4
102.8
92.6
2
2
MSMLG22A
MSMLG24A
MSMLJ22A
MSMLJ24A
22
24
24.4 – 26.9
26.7 – 29.5
1
1
35.5
38.9
84.4
77.2
2
2
MSMLG26A
MSMLG28A
MSMLJ26A
MSMLJ28A
26
28
28.9 – 31.9
31.1 – 34.4
1
1
42.1
45.4
71.2
66.0
2
2
MSMLG30A
MSMLG33A
MSMLJ30A
MSMLJ33A
30
33
33.3 – 36.8
36.7 – 40.6
1
1
48.4
53.3
62.0
56.2
2
2
MSMLG36A
MSMLG40A
MSMLJ36A
MSMLJ40A
36
40
40.0 – 44.2
44.4 – 49.1
1
1
58.1
64.5
51.6
46.4
2
2
MSMLG43A
MSMLG45A
MSMLJ43A
MSMLJ45A
43
45
47.8 – 52.8
50.0 – 55.3
1
1
69.4
72.7
43.2
41.2
2
2
MSMLG48A
MSMLG51A
MSMLJ48A
MSMLJ51A
48
51
53.3 – 58.9
56.7 – 62.7
1
1
77.4
82.4
38.8
36.4
2
2
MSMLG54A
MSMLG58A
MSMLJ54A
MSMLJ58A
54
58
60.0 – 66.3
64.4 – 71.2
1
1
87.1
93.6
34.4
32.0
2
2
MSMLG60A
MSMLG64A
MSMLJ60A
MSMLJ64A
60
64
66.7 – 73.7
71.1 – 78.6
1
1
96.8
103.0
31.0
29.2
2
2
MSMLG70A
MSMLG75A
MSMLJ70A
MSMLJ75A
70
75
77.8 – 86.0
83.3 – 92.1
1
1
113
121
26.6
24.8
2
2
MSMLG78A
MSMLG85A
MSMLJ78A
MSMLJ85A
78
85
86.7 – 95.8
94.4 – 104.0
1
1
126
137
22.8
20.8
2
2
MSMLG90A
MSMLG100A
MSMLJ90A
MSMLJ100A
90
100
100 – 111
111 – 123
1
1
146
162
20.6
18.6
2
2
MSMLG110A
MSMLG120A
MSMLJ110A
MSMLJ120A
110
120
122 – 135
133 – 147
1
1
177
193
16.8
15.6
2
2
MSMLG130A
MSMLG150A
MSMLJ130A
MSMLJ150A
130
150
144 – 159
167 – 185
1
1
209
243
14.4
12.4
2
2
MSMLG160A
MSMLG170A
MSMLJ160A
MSMLJ170A
160
170
178 – 197
189 – 209
1
1
259
275
11.6
11.0
2
2
NOTE 1: For Bidirectional device types indicate a CA suffix after the part number (i.e. MSMLG170CA). Bidirectional
capacitance is half that shown in Figure 4 at zero volts.
NOTE 2: Microsemi Corp’s SML series (3000W) surface mountable packages are designed specifically for transient voltage
suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance path fo
surge current flow to ground. These high-speed transient voltage suppressors can be used to effectively protect
sensitive components such as integrated circuits and MOS devices.
RF01003 Rev B, Sept 2011 High Reliability Product Group Page 3 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 68400 44, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-166 6, Fax: (978) 6890803
Website: http://www.microsemi.com
_____________ ___ __
RF01003 Rev B, Sept 2011 High Reliability Product Group Page 4 of 4
_____________________________________________________________________ ____________________________________________
GRAPHS
100
FIGURE 2 – Pulse waveform
(Waveform – See Figure 2)
Non-repetitive
(P
PP
) – Peak Pulse Power - kW
10
1.0
0
1μs 10μsec 100μsec 1ms 10ms
tp – Pulse Time – sec
FIGURE 1 – Peak Pulse Power vs. Pulse Time
BV: Breakdown Voltage in Volts
FIGURE 4 Typical Capacitance vs. Breakdown
Peak Pulse Power (
P
PP
) or continuous
Power in Percent of 25
o
C Rating
C: Capacitance in pico farads
T
L
Lead Temperature
o
C
FIGURE 3
–
Deratin
g
Curve