VUO 86 IdAV = 86 A VRRM = 800-1600 V Three Phase Rectifier Bridge Preliminary data VRSM VRRM V V 900 1300 1500 1700 800 1200 1400 1600 D Types VUO 86-08NO7 VUO 86-12NO7 VUO 86-14NO7 VUO 86-16NO7 Symbol Test Conditions IdAV TC = 90C, module IFSM TVJ = 45C; VR = 0 I2t H A N K Maximum Ratings 86 A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 530 570 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 480 520 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1400 1360 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1140 A2s A2s -40...+150 150 -40...+125 C C C 2500 3000 V~ V~ TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s Md Mounting torque (M4) Weight typ. Symbol Test Conditions IR VR = VRRM; VR = VRRM; TVJ = 25C TVJ = TVJM TVJ = 25C VF IF For power-loss calculations only RthJC RthJH dS dA a Nm lb.in. g Characteristic Values VT0 rT = 80 A; 1.5 - 2 14 - 18 18 0.5 3 Features * Package with DCB ceramic base plate * Isolation voltage 3000 V~ * Planar passivated chips * Low forward voltage drop * Leads suitable for PC board soldering Applications * * * * Supplies for DC power equipment Input rectifiers for PWM inverter Battery DC power supplies Field supply for DC motors Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling capability * Small and light weight Dimensions in mm (1 mm = 0.0394") mA mA 1.5 V 0.8 7.5 V mW per diode; DC current per module per diode, DC current per module 1.2 0.2 1.5 0.25 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 11.2 9.7 50 mm mm m/s2 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2000 IXYS All rights reserved 002 Data according to IEC 60747 refer to a single diode unless otherwise stated for resistive load at bridge output. 1-1 http://store.iiic.cc/