1
Miniature Interface Coaxial Switch, DC to 10 GHz
MS-162 Series
2006.2
■Features
1. Low insertion loss
0.08 dB typical at 1 GHz
0.12 dB typical at 2 GHz
(not mated with the plug)
2. Space-saving design
3.5 mm x 3.1 mm occupied board space.
3. Low profile
2.5 mm max. protrusion above the board.
4. Lightweight
0.044 g total weight
5. Durability
12, 000 mating/unmating cycles, with corresponding plug.
6. Critical area protection
MS-162 (Receptacle) contact has nickel plating areas to
prevent solder wicking into critical areas.
7. Board placement with automatic equipment.
Packaged on tape-and-reel.
8. Self alignment
When mating, plug and receptacle will self align in
horizontal axis within 0.5mm.
9. RoHS compliant
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
■Applications
*Wireless communication modules (Bluetooth, WLAN,
UWB, ZigBee)
*Portable terminals, notebook computers, ETC, POS
terminals, GPS terminals, PDA, and any small devices
requiring verification of antenna/circuit performance and
re-direction of the transmission.
■Overview
Designed to be used as the interface antenna
connection for portable terminal devices as well
as circuit testing on microwave boards (DC to
10GHz) the coaxial switch offers high performace,
low loss, extremely high durability and reliability,
in a small and lightweight package.
Normally closed, the circuit is re-directed to the
plug side by the mating of the plug with the
receptacle.
MS-147
■Footprint
■Height
■Weight
39.6mm214.0mm2
6.0
5.4
5.8
6.6
MS-162
4.0
3.5
3.9
3.1
3.5
MAX
2.5
65% saving of space
36% lower profile
60% lighter weight
0.11g 0.044g
●Plugs
MS-162-C(LP)-1 MS-162-HRMJ-1
●
SMA conversion adapter
Comparison with the existing MS-147
NEW
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
■Product Specifications
100 mA
100 V DC
100 V AC / 1 minute
Frequency: 10 to 55 Hz, single amplitude of 1.5 mm,
2 hours in each of the 3 axis.
Acceleration of 490 m/s2, 6 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
96 hours at 40ç, RH of 90% to 95%
Temperature: –55ç/+5çto +35ç/+85ç/+5çto +35ç
Time: 30 /+ 5 max. /+30 /+5max.
(Minutes)
100 cycles
12, 000 cycles
100 mømax.
1000 Mømin.
No flashover or insulation breakdown
No electrical discontinuity of 10 µs or more
No electrical discontinuity of 10 µs or more
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
4. Vibration
5. Shock
6. Humidity
7. Thermal shock
8. Durability
(mating/un-mating, with
corresponding plug)
Item Specification Conditions
Operating temperature range
Rated power
Frequency range
V.S.W.R.
Insertion loss
Isolation loss
–40ç to +85ç
4W
DC to 10GHz
Not mated with the plug Open (Mated with MS-162-HRMJ-1)
1.2 max. (DC to 3GHz)
1.5 max. (3GHz to 6GHz)
1.7 max. (6GHz to 10GHz)
1.2 max. (DC to 3GHz)
1.6 max. (3GHz to 6GHz)
1.7 max. (6GHz to 10GHz)
0.15 dBmax. (DC to 2GHz)
0.20dBmax. (2GHz to 3GHz)
0.40dBmax. (3GHz to 6GHz)
0.70dBmax. (6GHz to 10GHz)
0.2 dBmax. (DC to 2GHz)
0.3 dBmax. (2GHz to 3GHz)
0.5 dBmax. (3GHz to 6GHz)
0.7 dBmax. (6GHz to 10GHz)
———————
25 dBmin. (DC to 1GHz)
20 dBmin. (1GHz to 3GHz)
14 dBmin. (3GHz to 6GHz)
12 dBmin. (6GHz to 10GHz)
■Materials
Part
Shell
Insulators
Common terminal
Antenna terminal
Brass
Polyamide
Beryllium copper
Phosphor bronze
Gold plated
——————
Partially gold plated (Nickel barrier)
Partially gold plated (Nickel barrier)
——————
UL94V-0
——————
——————
Material Finish Remarks
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
BHigh Frequency Characteristics (Typical)
0.0
0.2
0.4
0.6
0.8
1.8
1.6
1.4
1.2
1.0
0246
V.S.W.R.
INSERTION LOSS
810
V.S.W.R.
INSERTION LOSS
[dB]
[GHz]
0.0
0.2
0.4
0.6
0.8
1.8
1.6
1.4
1.2
1.0
0246
[GHz]
V.S.W.R.
INSERTION LOSS
810
V.S.W.R.
INSERTION LOSS
[dB]
●OPEN(N.O) ~ (Mated with the plug)
0
10
20
30
40 0246 [GHz]
ISOLATION
810
ISOLATION
[dB]
●NORMALLY CLOSED(N.C) ~ (Not mated with the plug)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
■Receptacle
BCircuit diagram
0.61
0.3
3.5
Ø2.8
2.41.88
2.48 3.1
1
B
C
GG
A0.4
G GG
B
G
A
C
G
G
A
C
G
B
G
MS-162 Plug MS-162 MS-162 Plug MS-162
MS-162
MS-162 (01)
Part Number
358-0208-3
358-0208-3-01
CL No.
3, 000 pieces/reel
100 pieces/bag
Packaging
YES
RoHS
Not mated with the plug (N.C) Mated with the plug (N.O)
BPCB mounting pattern and metal mask dimensions
4
2.4
0.6
0.5
0.62
2.8
3.5
0.8
0.65 0.65
area show the conductive pattern prohibited area.
4
3.5
2.4
0.6
0.65
2.8
0.65
0.5
0.62
PCB mounting pattern Metal mask dimensions
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
■Plug ■SMA conversion adapter
MS-162-C(LP)-1
Part Number
358-0222-4
CL No.
YES
RoHS
Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)
MS-162-HRMJ-1
Part Number
358-0210-5
CL No.
YES
RoHS
BRecommended Temperature profile
Maximum temperature
Peak temperature
Peak temperature time
200ç min.
150ç to 160ç
: 240ç
: 200ç to 235ç
: 10 sec. max.
: 50 sec. max.
: 40 sec. min.
0
100
160
200
240
10 sec. max.
40 sec. min. 50 sec. max.
Time (sec.)
150
Temperature (ç)
q
w
e
r
t
5 sec. max.
0
100
180
200
260
220
120 sec. max. 50 sec. to 80 sec.
Time (sec.)
Temperature (ç)
Maximum temperature
Peak temperature
Peak temperature time
220ç min.
180ç to 200ç
: 260ç
: 240ç to 255ç
: 5 sec. max.
: 50 sec. to 80 sec.
: 120 sec. max.
q
w
e
r
t
●Typical Solder Paste
●Typical Lead-free Solder Paste
Metal mask thickness: 0.12mm
Reflow cycles: 2 cycles
Metal mask thickness: 0.12mm
Reflow cycles: 2 cycles
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
BRecommended Nozzle Dimensions
Ø1
Ø3
Ø1.5
BPackaging Specifications
12
5.5 1.75
2
4
8
Ø1.5
Unreeling direction
3.25
12.4
Ø180
Ø80
Ø13
Unreeling direction
●Reel dimensions
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
BExample of Application
O-ring
F
Note 1: When mounting the MS-162-C(LP)-1 make sure that the
recommended self alignment distances and angle can be
maintained.
Note 2: When fully mated the spring force F must be 10N to 15N.
Installed in test fixture
Installed in portable devices
FF
A
Board
0.5min.
Clearance
Clearance
0.5min.
Tilt
prevention
View A
Self-centering
Mounting screw
Mounting screw
The retaining plate cannot protrude
and interfere with the cable termination areas.
Floating mounting plate (Plug side)
Retaining plate
Retaining plate
To measuring
instrument
Stop
MS-162-C(LP)-1
Cable termination
MS-162
Load Load
MS-162-C(LP)-1
Pressure plate moves vertically
Note 1: When mounting the MS-162-C(LP)-1 make sure that the recommended self alignment distances and angle can be
maintained.
Note 2: When fully mated the spring force F must be 10N to 15N.
Axial misalignment distance Allowable angular misalignment for mating
Receptacle
Plug
MS-162-C(LP)-1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
8The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
BPrecautions
P
1. Do not use the washing process.
2. Do note use hand soldering for mounting of MS-162.
3. When using a heat gun, hot plate, or similar methods, limit the temperature to 260ç applied for
10 seconds max.
4. Consult Hirose if your application, installation methods or end-user environment are different
than the recommended.
5. Please refrain from using the product in environments specifically affected by dust, high
humidity, gases, very high temperatures and very low temperatures.
6. When used as an RF interface of a portable terminal, consider using a rubber cap or other
means of protection against intrusion of dust, dirt or other harmfull elements.
7. When using, assure that the plug is fully inserted to the surface (P), as shown.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.