5 1 2 3 4 Global Connector Technology Ltd. - BD100: 1.27mm PITCH PIN HEADER, SINGLE ROW, THROUGH HOLE, HORIZONTAL 6 7 8 A A B B C C D D E E Ordering Grid BD100 SPECIFICATIONS : CURRENT RATING 1 AMP INSULATOR RESISTANCE 1000 MEGOHMS MIN. DIELECTRIC WITHSTANDING AC 300 V CONTACT RESISTANCE 20m Max. F OPERATING TEMPERATURE -40C TO +105C CONTACT MATERIAL COPPER ALLOY INSULATOR MATERIAL : OPTIONS : POLYESTER , LCP, UL 94-V0 (INSULATOR HEIGHT/ H = A, B) OPTIONS : POLYAMIDE , NYLON 6T, UL 94-V0 (INSULATOR HEIGHT/ H = K) SOLDERING PROCESS : G LCP (STANDARD) IR REFLOW : 260C for 10 sec. WAVE : 250C for 5-10 sec MANUAL SOLDER : 350C for 3-5 sec NYLON 6T (OPTION ) IR REFLOW : 260C for 10 sec. WAVE : 230C for 5-10 sec. MANUAL SOLDER : 350C for 3-5sec MATES WITH (SUBJECT TO PIN LENGTH ): BD074 BD075 BD080 BD090 H By DETAIL REV DATE LYH DRAWING RELEASE A 28/12/07 1 X XXXX XXXX X XXXX X Packing Options G = Plastic Box (Standard) A= Tape and Reel D = Tube No. of Contacts 02 to 33 Contact Plating A = Gold Flash All Over B = Selective Gold Flash Contact Area/ Tin On Tail C = Tin All Over G = 10" Gold Contact Area/Tin On Tail I = 30" Gold Contact Area/Tin On Tail Standard = Gold Flash All Over Insulator Height "H" K = 1.00mm A = 1.50mm B = 2.00mm Standard = 2.00mm Dimension C (1/100mm) (Post Height) Standard - 3.00mm = 0300 or specify Dimension C e.g. 2.50mm = 0250 Tol +/- 0.2mm Tolerances (Except as noted) X.5 .X2 X.X 0.20 X.XX 0.15 .XX1 X.XXX 0.10 .XXX0.5 X. 0.30 3 AE INSULATOR MATERIAL UPDATED FOR SPECIFIC INSULATOR HEIGHTS F 07/08/09 SA PACKING OPTIONS CHANGED G 04/06/10 4 F Insulator Material L = LCP (Insulator H = A, B) N = Nylon 6T (Insulator H = K) Dimension D (1/100mm) (Tail Length) Standard - 3.00mm = 0300 or specify Dimension D e.g. 2.50mm = 0250 Tol +/- 0.2mm Part Number:- Third Angle Projection 5 Dimension E (1/100mm) (Insulator to Pin Bend) Standard - 2.50mm = 0250 or specify Dimension E e.g. 3.00mm = 0300 Tol +/- 0.2mm G GC Date:- BD100 Dimensions in mm CB AE PN PN STANDARD INSULATOR PACKING OPTIONS SOLDER TEMP & MATES STD INSULATOR WITH INFO. UPDATED CHANGED HEIGHT CHANGED MATERIAL CHANGED C B D E 27/04/09 17/04/09 20/05/09 27/07/09 2 XX X 28 DEC 07 Description:- 1.27mm PITCH PIN HEADER, SINGLE ROW, THROUGH HOLE, HORIZONTAL C THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED WITHOUT WRITTEN CONSENT 6 H www.globalconnectortechnology.com Scale Revision Material Drawn by NTS G See Note LYH 7 Sheet No. E & OE 8 1/1