TQ TESTING LOW PROFILE 2 FORM C RELAY TQ RELAYS FEATURES 26.7 1.051 9 .354 5+0.4 -0.2 .197+.016 -.008 9 .354 14 .551 5+0.4 -0.2 .197+.016 -.008 mm inch * High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) * Surge voltage withstand: 1500 V FCC Part 68 * Sealed construction allows automatic washing * Self-clinching terminal also available * M.B.B. contact types available SPECIFICATIONS Characteristics Contact Standard (B.B.M) type Arrangement 2 Form C 4 Form C Initial contact resistance, max. (By voltage drop 6 V DC 1A) Contact material Rating 2 Form D Gold-clad silver 1 A 30 V DC Max. switching power (resistive load) 30 W, 62.5 V A 30 W Max. switching voltage 110 V DC, 125 V AC 110 V DC Max. switching current Single side stable Nominal operating power 1 coil latching 2 coil latching Mechanical (at 180 cpm) Expected 1 A 30 V DC life (min. Electrical (at 20 cpm) resistive opera(1 A 30 V 0.5 A 125 V AC tions) DC resistive) resistive 1A 10 A 10 mV DC 140 mW (3 to 12 V DC) 280 mW 200 mW (3 to 24 V DC) (24 V DC) 400 mW 300 mW (48 V DC) (48 V DC) 100 mW (3 to 12 V DC) 150 mW (24 V DC) 200 mW (3 to 12 V DC) 300 mW (24 V DC) 200 mW Initial breakdown voltage 1,000 Vrms for 1 min. (Detection current: 10 mA) Between contact sets 1,000 Vrms for 1 min. (Detection current: 10 mA) FCC surge voltage between open contacts 1,500 V Operate time [Set time]*3 (at 20C) Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] Release time [Reset time]*4 (at 20C) Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] Temperature rise*2 (at 20C) -- -- 108 107 2x105 105 105 -- Max. 50C Functional*5 Min. 490 m/s2 {50G} Destructive* Min. 980 m/s2 {100G} Functional*7 176.4 m/s2 {18G}, 10 to 55 Hz at double amplitude of 3 mm Destructive 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm 6 Ambient Conditions for temperature operation, transport and storage*9 (Not freezing and condensing at low Humidity temperature) Unit weight Note: Min. 10 s. -- M.B.B. time*8 Vibration resistance 400 mW 300 Vrms for 1 min. (Detection current: 10 mA) Between contact and coil Shock resistance 200 mW 750 Vrms for 1 min. (Detection current: 10 mA) Between open contacts 1 A 30 V DC 0.5 A 125 V AC M.B.B.type Min. 1,000 M (at 500 V DC) Initial insulation resistance*1 50 m Nominal switching capacity (resistive load) Min. switching capacity I1 Standard (B.B.M) type M.B.B.type 2 Form C: 4 Form C: -40C to +70C -40F to +158F -40C to +50C -40F to +122F 5 to 85% R.H. Approx. 1.5 g .053 oz Approx. 3 g .106 oz. -- I1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10 A 1 mV DC - 10 mA 10 V DC]) Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A. *3 Nominal voltage applied to the coil, excluding contact bounce time. *4 Nominal voltage applied to the coil, excluding contact bounce time without diode. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 s. *6 Half-wave pulse of sine wave: 6 ms. *7 Detection time: 10 s. *8 M.B.B. time: Min. 10 s Measuring condition 500 5 V DC *9 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (see catalog). en_ds_61020_0001: 100805J 1 TQ ORDERING INFORMATION EX. TQ Contact arrangement 2: 2 Form C 4: 4 Form C 2 H L2 2M Operating function Terminal shape 3V MBB function Nil: Standard PC board Nil: Single side stable Nil: Standard L: 1 coil latching terminal (B.B.M.) type H: Self-clinching terminal L2: 2 coil latching 2M: 2M.B.B. type Coil voltage (DC) 3, 4.5, 5, 6, 9, 12, 24, 48* V *48 V coil type: Single side stable only Notes: 1. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "-3" like TQ2-12V-3. 2. M.B.B. contact types are available only for TQ2 type. TYPES AND COIL DATA (at 20C 68F) 1. Standard (B.B.M.) type 2 Form C type 1. Single side stable Part No. Standard PC board terminal Self-clinching terminal TQ2-3 V TQ2H-3 V TQ2-4.5 V TQ2H-4.5 V TQ2-5 V Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 3 2.25 0.3 46.7 64.3 140 4.5 4.5 3.38 0.45 31.1 144.6 140 6.7 TQ2H-5 V 5 3.75 0.5 28.1 178 140 7.5 TQ2-6 V TQ2H-6 V 6 4.5 0.6 23.3 257 140 9 TQ2-9 V TQ2H-9 V 9 6.75 0.9 15.5 579 140 13.5 TQ2-12 V TQ2H-12 V 12 9 1.2 11.7 1,028 140 18 TQ2-24 V TQ2H-24 V 24 18 2.4 8.3 2,880 200 36 TQ2-48 V TQ2H-48 V 48 36 4.8 6.25 7,680 300 57.6 Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 2. 1 Coil latching Part No. Standard PC board terminal Self-clinching terminal TQ2-L-3 V TQ2H-L-3 V TQ2-L-4.5 V TQ2H-L-4.5 V 3 2.25 2.25 33.3 90 100 4.5 4.5 3.38 3.38 22.2 202.5 100 6.7 TQ2-L-5 V TQ2-L-6 V TQ2H-L-5 V 5 3.75 3.75 20 250 100 7.5 TQ2H-L-6 V 6 4.5 4.5 16.7 360 100 9 TQ2-L-9 V TQ2H-L-9 V 9 6.75 6.75 11.1 810 100 13.5 TQ2-L-12 V TQ2H-L-12 V 12 9 9 8.3 1,440 100 18 TQ2-L-24 V TQ2H-L-24 V 24 18 18 6.3 3,840 150 36 Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 3. 2 Coil latching Part No. Standard PC board terminal Self-clinching terminal TQ2-L2-3 V TQ2H-L2-3 V TQ2-L2-4.5 V TQ2H-L2-4.5 V 3 2.25 2.25 66.7 45 200 4.5 4.5 3.38 3.38 44.4 101.2 200 6.7 TQ2-L2-5 V TQ2-L2-6 V TQ2H-L2-5 V 5 3.75 3.75 40 125 200 7.5 TQ2H-L2-6 V 6 4.5 4.5 33.3 180 200 9 TQ2-L2-9 V TQ2H-L2-9 V 9 6.75 6.75 22.2 405 200 13.5 TQ2-L2-12 V TQ2H-L2-12 V 12 9 9 16.7 720 200 18 TQ2-L2-24 V TQ2H-L2-24 V 24 18 18 12.5 1,920 300 28.8 Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "-3" like TQ2-12V-3. 2 en_ds_61020_0001: 100805J TQ 4 Form C type 1. Single side stable Part No. Standard PC board terminal Self-clinching terminal TQ4-3 V TQ4H-3 V TQ4-4.5 V TQ4H-4.5 V TQ4-5 V Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 4.5 3 2.25 0.3 93.8 32 280 4.5 3.38 0.45 62.2 72.3 280 6.7 TQ4H-5 V 5 3.75 0.5 56.2 89 280 7.5 TQ4-6 V TQ4H-6 V 6 4.5 0.6 46.5 129 280 9 TQ4-9 V TQ4H-9 V 9 6.75 0.9 31.1 289 280 13.5 TQ4-12 V TQ4H-12 V 12 9 1.2 23.3 514 280 18 TQ4-24 V TQ4H-24 V 24 18 2.4 11.7 2,056 280 36 TQ4-48 V TQ4H-48 V 48 36 4.8 8.3 5,760 400 57.6 Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 2. 1 Coil latching Part No. Standard PC board terminal Self-clinching terminal TQ4-L-3 V TQ4H-L-3 V TQ4-L-4.5 V TQ4H-L-4.5 V 3 2.25 2.25 66.6 45 200 4.5 4.5 3.38 3.38 44.4 101.2 200 6.7 TQ4-L-5 V TQ4-L-6 V TQ4H-L-5 V 5 3.75 3.75 40 125 200 7.5 TQ4H-L-6 V 6 4.5 4.5 33.3 180 200 9 TQ4-L-9 V TQ4H-L-9 V 9 6.75 6.75 22.2 405 200 13.5 TQ4-L-12 V TQ4H-L-12 V 12 9 9 16.7 720 200 18 TQ4-L-24 V TQ4H-L-24 V 24 18 18 8.3 2,880 200 36 Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 3. 2 Coil latching Part No. Standard PC board terminal Self-clinching terminal TQ4-L2-3 V TQ4H-L2-3 V TQ4-L2-4.5 V TQ4H-L2-4.5 V 3 2.25 2.25 133 22.5 400 4.5 4.5 3.38 3.38 88.9 50.6 400 6.7 TQ4-L2-5 V TQ4-L2-6 V TQ4H-L2-5 V 5 3.75 3.75 80 62.5 400 7.5 TQ4H-L2-6 V 6 4.5 4.5 66.6 90 400 9 TQ4-L2-9 V TQ4H-L2-9 V 9 6.75 6.75 44.4 202.5 400 13.5 TQ4-L2-12 V TQ4H-L2-12 V 12 9 9 33.3 360 400 18 TQ4-L2-24 V TQ4H-L2-24 V 24 18 18 16.7 1,440 400 36 Notes: 1. Specified value of the pick-up, drop-out, voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 25 pcs.; Case: 500 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. 1 coil latching and 2 coil latching types are also available by request. Please consult us for details. 5. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "-3" like TQ2-12V-3. 2. M.B.B. type Single side stable Part No. Standard PC board terminal Self-clinching terminal TQ2-2M-3 V TQ2H-2M-3 V TQ2-2M-4.5 V TQ2H-2M-4.5 V TQ2-2M-5 V TQ2H-2M-5 V TQ2-2M-6 V TQ2H-2M-6 V TQ2-2M-9 V Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Nominal operating current, mA (10%) Coil resistance, (10%) Nominal operating power, mW Max. allowable voltage, V DC 3 2.4 0.3 66.7 45 200 4.5 4.5 3.6 0.45 44.4 101 200 6.7 5 4 0.5 40 125 200 7.5 6 4.8 0.6 33.3 180 200 9 TQ2H-2M-9 V 9 7.2 0.9 22.2 405 200 13.5 TQ2-2M-12 V TQ2H-2M-12 V 12 9.6 1.2 16.7 720 200 18 TQ2-2M-24 V TQ2H-2M-24 V 24 19.2 2.4 8.3 2,880 200 36 Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommend to use 4.5 V type relay. 4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "-3" like TQ2-12V-3. en_ds_61020_0001: 100805J 3 TQ DIMENSIONS mm inch 1) 2 Form C, 2 Form D Standard PC board terminal 4.75 .187 14 .551 PC board pattern (Copper-side view) 9 .354 10.16 .400 2.54 .100 10-1.0 dia. 10-.039 dia 5 +0.4 -0.2 .197 +.016 -.008 2.54 .100 7.62 .300 3.5 .138 0.25 .010 2.54 .100 0.5 .020 0.25 .010 7.62 .300 Tolerance: 0.1 .004 Self-clinching terminal 4.75 .187 5 +0.4 -0.2 .197 +.016 -.008 14 .551 Schematic (Bottom view) * Single side stable (Deenergized condition) 9 .354 3.5 .138 1 + 0.25 .010 2.54 .100 0.5 .020 0.25 .010 7.62 .300 - 2 10 9 3 8 4 7 * 1-coil latching (Reset condition) 5 - + 6 Direction indication* 1 2 3 4 * 2-coil latching (Reset condition) 5 1 2 3 4 + - + 10 9 8 7 6 10 9 Direction indication* 5 - 8 7 6 Direction indication* *Orientation stripe typical-located on top of relay General tolerance: 0.3 .012 2) 4 Form C Standard PC board terminal 5 +0.4 -0.2 .197 +.016 -.008 26.7 1.051 4.75 .187 PC board pattern (Copper-side view) 9 .354 22.86 .900 2.54 .100 5.08 .200 16-1.0 dia. 16-.039 dia 3.5 .138 0.25 .010 5.08 .200 0.5 .020 2.54 .100 7.62 .300 2.54 .100 7.62 .300 0.25 .010 Tolerance: 0.1 .004 Self-clinching terminal 5 .197 26.7 1.051 4.75 .187 Schematic (Bottom view) * Single side stable (Deenergized condition) 9 .354 +0.4 -0.2 +.016 -.008 3.5 .138 + 0.25 .010 5.08 .200 0.5 .020 2.54 .100 7.62 .300 0.25 .010 1 3 4 5 6 7 8 10 20 181716 151413 11 Direction indication* - * 1-coil latching (Reset condition) - 1 3 4 5 6 7 8 10 20 181716 151413 11 Direction indication* * 2-coil latching (Reset condition) + 1 3 4 5 6 7 8 10 + 20 181716 151413 11 + - - Direction indication* *Orientation stripe typical-located on top of relay General tolerance: 0.3 .012 REFERENCE DATA 1. Maximum switching capacity 2. Life curve 3. Mechanical life 1.0 0.5 0.4 0.3 30 V DC resistive load 100 125 V AC resistive load 10 0.2 30 4 100 200 Switching voltage,V 0 0.5 1.0 Switching current, A Ratio against the rated voltage, %V DC load (cos=1) AC load (cos=1) No. of operations, x104 Switching current, A Tested sample: TQ2-12V, 10 pcs. 100 90 80 Pick-up voltage 70 60 Max. Min. 50 40 Drop-out voltage 30 Max. 20 Min. 10 0 10 100 1,000 10,000 No. of operations, x104 en_ds_61020_0001: 100805J TQ 4.-(1) Electrical life (DC load) 4.-(2) Electrical life (AC load) Tested sample: TQ2-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm Tested sample: TQ2-12V, 6 pcs. Condition: 0.5 A 125 V AC resistive load, 20 cpm 100 90 90 Pick-up voltage Max. 70 Min. 60 50 40 Drop-out voltage Max. 30 20 Min. 70 60 50 Max. 40 Min. 30 20 10 10 0 5 10 15 No. of operations, x104 20 Change of contact resistance 0 5 10 15 No. of operations, x104 50 40 Max. 30 Min. 20 10 0 5 No. of operations, x104 Min. 50 40 Drop-out voltage 60 50 1A 40 1A 0A 30 Min. 20 10 0 5 No. of operations, x104 60 50 1A 40 0A 30 20 10 10 0 10 70 20 10 Max. 30 20 Nominal coil voltage 3 to 12 V DC type 24 V DC type Max. 60 Tested sample: TQ4-12V Measured portion: Inside the coil Ambient temperature: 30C 86F Temperature rise, C 60 Pick-up voltage 70 5.-(2) Coil temperature rise (4C) 70 70 80 Tested sample: TQ2-12V Measured portion: Inside the coil Ambient temperature: 30C 86F 90 80 90 5.-(1) Coil temperature rise (2C) 100 Contact resistance, m 80 100 Temperature rise, C 80 Change of pick-up and drop-out voltage Ratio against the rated voltage, %V Change of contact resistance 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 0 100 110 120 130 140 150 Coil applied voltage, %V 100 110 120 130 140 150 Coil applied voltage, %V 6.-(1) Operate/release time characteristics 6.-(2) Operate/release time characteristics 7. Distribution of pick-up and drop-out voltages Tested sample: TQ2-12V, 10 pcs. Tested sample: TQ4-12V, 10 pcs. Tested sample: TQ2-12V, 50 pcs. 6 4 3 Operate time 2 Max. Min. Max. Min. Release time 1 0 80 90 100 110 120 Coil applied voltage, %V 30 Pick-up voltage Drop-out voltage 5 4 20 Quantity 5 Operate/release time, ms Operate/release time, ms 6 3 Operate time 2 1 0 Release time 80 10 Max. Min. Max. Min. 90 100 110 120 Coil applied voltage, %V 0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V 9. Ambient temperature characteristics 10. Distribution of contact resistance Tested sample: TQ2-L2-12V, 35 pcs. Tested sample: TQ2-12V, 5 pcs. Tested sample: TQ2-12V, 30 pcs. (30x4 contacts) ;yy;y;y;y;y; y;y;y;y;y;y; ;yy;;y y; y; y; y; 30 Set voltage 20 10 0 y;y;y;y;y;y; y;yy;;y;yy;;y;y;y; Quantity Reset voltage 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V en_ds_61020_0001: 100805J 40 40 Drop-out voltage 20 -40 -20 0 - x - x Pick-up voltage 20 40 60 80 Ambient temperature,C -20 30 Quantity Variation ratio,% 8. Distribution of set and reset voltage 20 10 -40 0 30 40 50 Contact resistance, m 5 TQ 11.-(1) High-frequency characteristics 11.-(2) High-frequency characteristics 11.-(3) High-frequency characteristics Isolation characteristics Insertion loss characteristics V.S.W.R. 3.0 50 10 100 Frequency,MHz 2.4 1.0 0.8 1.6 1.4 0.2 1.2 0 1,000 10 100 Frequency,MHz Tested sample: TQ2-L-12V, 6 pcs. 980m/s2 , Z , ,Z XX Y Z 980m/s2 Y, Y Deenergized condition Energized condition Z 980m/s2 196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y Reset state Set state Z 980m/s2 X 980m/s2 196m/s2 392m/s2 588m/s2 784m/s2 980m/s2 , Y 980m/s2 , Z 980m/s2 , X 1.0 1,000 12.-(2) Malfunctional shock (latching) X 1.8 0.4 Tested sample: TQ2-12V, 6 pcs. 980m/s2 2.0 0.6 12.-(1) Malfunctional shock (single side stable) , ,Z XX Y Z 980m/s2 Y, Y 2.2 V.S.W.R. 100 2.6 980m/s2 , X 0 10 13.-(3) Influence of adjacent mounting 1 Pick-up voltage ON ON 0 -10 ON OFF OFF 10 Drop-out voltage 0 OFF -10 0 13.-(2) Influence of adjacent mounting 0.5 Frequency,GHz 13.-(1) Influence of adjacent mounting Rate of change, % Rate of change, % Insertion loss, dB Isolation, dB 2.8 5 .197 Inter-relay distance , mm inch 14.-(1) Contact reliability (1 mA 5 V DC resistive load) Pick-up voltage ON 0 ON -10 ON 10 Drop-out voltage OFF 0 OFF -10 0 OFF 5 .197 Inter-relay distance 10 Pick-up voltage F(t), % 99.9 99.0 95.0 ON 0 ON -10 ON 70.0 50.0 30.0 ON 10 10.0 5.0 Drop-out voltage OFF 0 2.0 1.0 0.5 OFF OFF -10 , mm inch 5 .197 Inter-relay distance 15. Actual load test (35 mA 48 V DC wire spring relay load) Tested sample: TQ2-12V Condition: Detection level 100 Circuit 100 20Hz 500 10.0 5.0 0.2 0.1 1.0 6 100 Change of pick-up and drop-out voltage 70.0 50.0 30.0 2.0 1.0 0.5 10 No. of operations, x106 , mm inch 14.-(2) Contact reliability (100 A 5 V DC resistive load) F(t), % 99.9 99.0 95.0 m=2.15 =2.7x107 95% reliability limit = 7.6x106 (Weibull probability paper) 0.2 0.1 1.0 OFF 0 m=1.4 =16.4x107 95% reliability limit = 19.5x106 (Weibull probability paper) 10 No. of operations, x107 100 48 V DC 500 Wire spring relay Circuit diagram Ratio against the rated voltage, %V 10 Rate of change, % Rate of change, % Rate of change, % Rate of change, % Tested sample: TQ2-12V Condition: Detection level 10 W 90 80 Pick-up voltage 70 Max. Min. 60 50 40 30 Drop-out voltage 20 10 0 10 20 30 40 No. of operations, x104 Max. Min. 50 en_ds_61020_0001: 100805J TQ 16. 0.1 A 53 V DC resistive load test Change of pick-up and drop-out voltage Change of contact resistance 100 70 60 50 40 Max. 30 Min. 20 10 0 10 20 30 40 No. of operations, x104 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 30 Drop-out voltage 20 Max. Min. 10 0 50 500 1,000 1,500 2,000 No. of operations, x104 Contact resistance, m 80 Ratio against the rated voltage, %V 100 90 Contact resistance, m Change of contact resistance 90 80 70 60 Max. 50 40 30 Min. 20 10 0 500 1,000 1,500 2,000 No. of operations, x104 17.-(1) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs. Terminal Nos. 2-3-4: ON Terminal Nos. 2-3-4: OFF - x:105.6 s 3n-1: 163.8 s Min.: 23 s Max.:243 s 30 26 20 50 7 10 50 100 150 200 250 300 350 s max. 100 150 200 250 300 s min. ~ 0 ~ 100 150 200 250 300 350 s max. ~ 50 ~ ~ 100 150 200 250 300 s min. ~ 10 ~ ~ 50 10 10 4 ~ 17 10 0 27 ~ 19 ~ 19 41 ~ 30 20 50 40 40 - x:71.6 s 3n-1: 127.1 s Min.: 17 s Max.:187 s ~ 50 60 ~ 60 17.-(2) Distribution of M.B.B. time Sample: TQ2-2M-5V, 85 pcs. Terminal Nos. 7-8-9: ON 60 Terminal Nos. 7-8-9: OFF - x:115.6 s 3n-1: 167.3 s Min.:35 s Max.:254 s 50 30 50 30 21 20 15 12 10 4 2 100 150 200 250 300 s min. ~ 100 150 200 250 300 350 s max. ~ 50 ~ 50 1 10 ~ 0 ~ ~ ~ 100 150 200 250 300 s min. ~ 100 150 200 250 300 350 s max. ~ 50 ~ 10 ~ 2 ~ 6 ~ 11 10 50 35 31 ~ 30 0 - x:80.7 s 3n-1: 156.7 s Min.: 29 s Max.:298 s 40 40 20 60 For Cautions for Use, see Relay Technical Information (see catalog). en_ds_61020_0001: 100805J 7