HT Series Aluminum Electrolytic Capacitors (High Operating Temperature) MERITEK FEATURES * * * * Wide operating temperature range High and stable quality Very high CV capacity o Load life 1000 hrs at 105 C SPECIFICATIONS Item Characteristic o o o -40 C to +105 C Operating Temp Range Rated Working Voltage o -25 C to +105 C 6.3 to 100VDC 160 to 400VDC 20% (M) Capacitance Tolerance Leakage Current (25oC ) Rated Voltage Time Leakage current (I) 100V > 100V After 3 minutes I 0.01CV or 3A Whichever is greater C= Nominal Capacitance (F) I 0.03CV +10 A V= Rated voltage o Surge voltage (25 C) Dissipation Factor Tan (120Hz, 25oC) Low Temperature Stability WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 SV 8 13 20 32 44 63 79 125 200 250 300 400 450 Add 0.02 per 100F for more than 100F WV 6.3 10 16 25 35 50 63 100 160 200 250 350 400 tan 0.24 0.20 0.17 0.15 0.12 0.10 0.10 0.08 0.20 0.20 0.20 0.25 0.25 Impedance ratio at 120Hz Rated voltage 6.3 10 16 25 35-100 160-250 350-400 o o 4 3 2 2 2 8 12 o o 10 8 6 4 3 -25 C to +25 C -40 C to +25 C Load Life Shelf Life o After 1000 hours application of WV at +105 C the capacitor shall meet the following limits Capacitance change 25% of initial value for 6.3 -16WV, 20% of initial value for 25 -400WV Dissipation Factor 200% of initial specified value Leakage current initial specified value o At 105 C no voltage applied after 500 hours the capacitor shall meet the following limits Capacitance change 20% of initial value Dissipation Factor 200% of initial specified value Leakage current 200% of initial specified value PART NUMBERING SYSTEM HT CASE SIZE 16V 222 M TA 13 x 21 Meritek Series Voltage Capacitance Expressed in microfarads (F). First two digits are significant figures. Third digit denotes number of zeros. `R' Denotes decimal point for values less than 10 F. Tolerance - M = 20% Package CODE TA Tape & Ammo TR Tape & Reel BLA NK Bulk D F d 5 2.0 0.5 6.3 2.5 8 3.5 10 13 5.0 0.6 16 18 7.5 0.8 RIPPLE CURRENT COEFFICIENTS o Temperature ( C) Multiplier 65 1.75 Frequency (Hz) WV 6.3-25 35-100 160-250 350-400 60 0.85 0.80 0.75 0.70 85 1.4 120 1K Multiplier 1 1.1 1 1.15 1 1.25 1 1.3 105 1 10K 1.2 1.25 1.4 1.5 Case size - (D) Diameter X (L) Length in mm (Optional) A suffix may be added to denote tape and reel/tape and ammo lead spacing or customer specific features Specifications are subject to change without notice. rev.6 Aluminum Electrolytic Capacitors HT Series (High Operating Temperature) CASE SIZE & MAX RIPPLE CURRENT F WV ITEM 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 F WV ITEM 0.1 to 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 6.3 WV ITEM F 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 WV ITEM 0.1 to 0.47 1 2.2 3.3 4.7 10 22 33 47 100 F 10 R.C. D x L R.C. 5x11 6.3x11 6.3x11 8x11 10x12 10x21 13x21 13x26 16x26 16x32 18x36 75 130 160 210 340 590 700 880 1020 1260 1420 5x11 6.3x11 8x11 8x11 10x16 13x21 13x21 16x26 16x32 18x36 18x42 80 140 190 230 400 650 760 960 1210 1350 1600 D x L R.C. D x L R.C. 5X11 5X11 5X11 5X11 6.3X11 8X11 10X12 10X16 13X21 13X26 16X32 18X36 18X42 30 44 55 65 110 180 240 320 530 810 1070 1220 1460 5X11 6.3X11 8X11 10X12 10X16 10X21 13X21 16X32 18X36 18X42 60 80 140 220 300 400 590 1020 1200 1420 25 D x L 5x11 6.3x11 8x11 8x11 10x12 10x21 13x21 13x26 16x32 18x36 18x42 35 R.C. 60 100 170 210 270 490 700 890 1140 1300 1530 50 D x L 5X11 5X11 5X11 5X11 5X11 5X11 5X11 6.3X11 6.3X11 8X11 10X16 10X21 13X21 16X26 18X36 18X42 63 R.C. 8 12 17 21 25 37 55 75 90 150 270 370 440 730 1130 1390 100 D x L R.C. 5X11 6.3X11 6.3X11 8X11 10X12 10X21 13X21 13X26 16X32 37 60 75 100 160 300 370 490 810 D x L 5x11 5x11 5X11 5X11 5X11 6.3X11 8X11 10X12 10X16 13X21 16X26 16X26 16X32 160 D x L 6.3x11 6.3x11 6.3x11 6.3X11 6.3X11 8X11 10X16 10X21 13X21 13X26 16X36 18X42 D x L (mm) mA (rms) o 85 C, 120Hz 16 D x L F WV ITEM 0.1 to 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 Case size: Max ripple current: (R.C.): MERITEK R.C. 9 13 19 24 28 47 80 110 140 230 380 470 620 200 R.C. 7 11 16 20 23 39 70 95 120 180 320 420 D x L 6.3x11 6.3x11 6.3X11 6.3X11 8X11 10X12 10X21 13X21 13X21 16X26 18X42 250 R.C. 8 12 17 21 29 46 85 110 120 200 370 D x L 6.3x11 6.3x11 6.3X11 8X11 8X11 10X16 13X21 13X21 13X26 16X32 350 D x L 8X11 8X11 8X11 10X12 10X12 10X21 13X26 16X26 16X36 18 X42 Custom sizes and leads spacing available upon request Custom values and tolerances available upon request R.C. 9 13 19 26 31 55 90 110 150 250 400 R.C. 8 12 18 24 29 50 85 110 150 230 D x L 5x11 8X11 10X12 10X12 10X16 13X21 13X26 16X32 18X36 R.C. 9 13 20 25 33 55 90 130 150