DS92LV010A
SNLS007E –MAY 1998–REVISED APRIL 2013
www.ti.com
5V DC ELECTRICAL CHARACTERISTICS (1)(2)
TA=−40°C to +85°C unless otherwise noted, VCC = 5.0V ± 0.5V
Parameter Test Conditions Pin Min Typ Max Units
VOD Output Differential Voltage RL= 27Ω, See Figure 3 DO+/RI+, 145 270 390 mV
DO−/RI−
ΔVOD VOD Magnitude Change 3 30 mV
VOS Offset Voltage 1 1.35 1.65 V
ΔVOS Offset Magnitude Change 5 50 mV
IOSD Output Short Circuit Current VO= 0V, DE = VCC −12 −20 mA
VOH Voltage Output High VID = +100 mV IOH =−400 µA ROUT 4.3 5.0 V
Inputs Open 4.3 5.0 V
Inputs Shorted 4.3 5.0 V
Inputs Terminated, RL= 27Ω4.3 5.0 V
VOL Voltage Output Low IOL = 2.0 mA, VID =−100 mV 0.1 0.4 V
IOS Output Short Circuit Current VOUT = 0V, VID = +100 mV −35 −90 −130 mA
VTH Input Threshold High DE = 0V DO+/RI+, +100 mV
DO−/RI−
VTL Input Threshold Low −100 mV
IIN Input Current DE = 0V, VIN = +2.4V, or 0V −20 ±1 +20 µA
VCC = 0V, VIN = +2.4V, or 0V −20 ±1 +20 µA
VIH Minimum Input High Voltage DIN, DE, 2.0 VCC V
RE
VIL Maximum Input Low Voltage GND 0.8 V
IIH Input High Current VIN = VCC or 2.4V ±1 ±10 µA
IIL Input Low Current VIN = GND or 0.4V ±1 ±10 µA
VCL Input Diode Clamp Voltage ICLAMP =−18 mA −1.5 −0.8 V
ICCD Power Supply Current DE = RE = VCC, RL= 27ΩVCC 17 25 mA
ICCR DE = RE = 0V 6 10 mA
ICCZ DE = 0V, RE = VCC 3 8 mA
ICC DE = VCC, RE = 0V, RL= 27Ω20 25 mA
Coutput Capacitance @ BUS Pins DO+/RI+, 5 pF
DO−/RI−
(1) All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground except
VOD, VID, VTH and VTL unless otherwise specified.
(2) All typicals are given for VCC = +3.3V or 5.0 V and TA= +25°C, unless otherwise stated.
4Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS92LV010A