RF NPN
SILICON TRANSISTOR
fτ = 15 GHz
NFmin = 1.2 dB
ICMAX = 20 mA
VCEO = 5.0 V
MBC13900
SEMICONDUCTOR
TECHNICAL DATA
Order this document by MBC13900PP/D
PLASTIC PACKAGE
CASE 318M
(SOT–343, Tape & Reel Only)
(Scale 4:1)
1
4
ORDERING INFORMATION
Device Package
MBC13900 SOT–343
1
23
4
Base
Emitter
Collector
Emitter
PIN CONNECTIONS
1
MOTOROLA RF PRODUCTS DEVICE DATA
Product Preview
The RF Building Block Series
NPN Silicon
Low Noise Transistor
The MBC13900 is a high performance transistor fabricated using
Motorola’s 15 GHz fτ bipolar IC process. It is housed in the 4–lead SC–70
(SOT–343) surface mount plastic package resulting in a parasitic effect
reduction and RF performance enhancements. The high performance at low
power makes the MBC13900 suitable for front–end applications in portable
wireless systems such as pagers, cellular and cordless phones.
•Low Noise Figure, NFmin = 1.0 dB (Typ) @1.0 GHz, 3.0 V and 3.0 mA
•Maximum Stable Gain, 22 dB @ 1.0 GHz, 3.0 V and 3.0 mA
•Output Third Order Intercept, OIP3 = 23 dBm @ 1.0 GHz, 3.0 V and
22 mA
•Ultra small SOT–343 Surface Mount Package
•Available Only in Tape and Reel Packaging
This document contains information on a product under development. Motorola reserves the
right to change or discontinue this product without notice.
Motorola, Inc. 2000 Rev 0
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
MBC13900
2MOTOROLA RF PRODUCTS DEVICE DATA
NOTES
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
MBC13900
3
MOTOROLA RF PRODUCTS DEVICE DATA
NOTES
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
MBC13900
4MOTOROLA RF PRODUCTS DEVICE DATA
OUTLINE DIMENSIONS
PLASTIC PACKAGE
CASE 318M–01
(SOT–343)
ISSUE O
ÉÉÉÉ
ÉÉÉÉ
ÇÇÇ
ÇÇÇ
ÉÉ
ÉÉ
A-B
M
0.10 DC
A
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES PER
ASME Y14.5M, 1994.
3. DIMENSION D DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH,
PROTRUSIONS OR GATE BURRS SHALL NOT
EXCEED 0.15mm PER END. DIMENSION E1 DOES
NOT INCLUDE INTERLEAD FLASH OR
PROTRUSION. INTERLEAD FLASH OR PROTRUSION
SHALL NOT EXCEED 0.15mm PER SIDE.
4. DIMENSIONS D AND E1 ARE DETERMINED AT THE
OUTMOST EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS,
GATE BURRS AND INTERLEAD FLASH, BUT
INCLUDING ANY MISMATCH BETWEEN THE TOP
AND BOTTOM OF PLASTIC BODY.
5. DATUMS A, B AND D TO BE DETERMINED 0.10mm
FROM THE LEAD TIP.
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. THESE DIMENSIONS APPLY TO THE FLAT SECTION
OF THE LEAD BETWEEN 0.08mm AND 0.15mm FROM
THE LEAD TIP.
0.15 C
0.20 C
0.10 C
E1/2
L2
E/2
E1
VIEW C
B
B
b1
c1
b
c
SECTION B–B
(SEE NOTE 7)
BASE METAL
WITH PLATING
3X
q
4X
ED
D
2X b
B
PIN 1 IDENTIFIER
IN THIS ZONE
2X
1
3
4
2
A2
A1
A
4X
SEATING PLANE
1
q
4X 1
q
(L1)
C
SEATING PLANE
GAUGE PLANE
L
VIEW C
DIM MIN MAX
MILLIMETERS
A--- 1.10
A1 0.00 0.10
A2 0.80 1.00
b0.25 0.40
b1 0.25 0.35
B0.55 0.70
B1 0.55 0.65
c0.10 0.25
c1 0.08 0.20
D2.00 BSC
E2.10 BSC
E1 1.25 BSC
e1 1.30 BSC
e2 0.65 BSC
e3 1.15 BSC
e4 0.50 BSC
L0.26 0.46
L1 0.425 REF
L2 0.15 BSC
q0 8
q4 10 1
e2
e1
e4
B (B1)
e3
__
__
0.15 C
2X
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
MOTOROLA and the logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.
E Motorola, Inc. 2002
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1,
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Minami–Azabu. Minato–ku, Tokyo 106–8573 Japan. 81–3–3440–3569
Technical Information Center: 1–800–521–6274 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
852–26668334
HOME PAGE: http://www.motorola.com/semiconductors/
MBC13900PP/D
◊
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
