https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 8-position, Plug straight M12, A-coded, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm Your advantages Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Screw connection: proven connection technology for a large selection of different conductors Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356904650 Weight per Piece (excluding packing) 20.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Diameter housing 20 mm Length 65.5 mm External cable diameter 8 mm ... 10 mm Stripping length of the sheath 20 mm Stripping length of the individual wire 5 mm Ambient conditions 07/08/2019 Page 1 / 6 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Technical data Ambient conditions Ambient temperature (operation) -40 C ... 85 C (Plug / socket) Degree of protection IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40C 2A Rated voltage 30 V AC 30 V DC Number of positions 8 Color handle area black Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm ... 0.5 mm (without ferrule) 0.14 mm ... 0.34 mm (with ferrule) 0.25 mm ... 0.5 mm (solid) Conductor cross section AWG 24 ... 20 (without ferrule) 26 ... 22 (with ferrule) Insertion/withdrawal cycles 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 1.5 Nm ... 2 Nm (Pressure screw with sleeve housing) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated 07/08/2019 Page 2 / 6 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Technical data Material Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 HB Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Schematic diagram Dimensional drawing O20 M12x1 65,5 Pin assignment M12 plug, 8-pos., A-coded, view plug side 18 19 Plug, M12 x 1, straight Classifications eCl@ss eCl@ss 4.1 27250313 eCl@ss 5.1 27260700 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 07/08/2019 Page 3 / 6 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Classifications UNSPSC UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC EAC-Zulassung Accessories Accessories Cable end sleeve Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm ... 6 mm, unlockable pressure lock, lateral entry 07/08/2019 Page 4 / 6 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Accessories Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive Screwdriver - SZS 0,4X2,0 - 1205202 Micro screwdriver, bladed, size: 0.4 x 2.0 x 60 mm, 2-component grip, with non-slip grip and twist cap Stripping tool 07/08/2019 Page 5 / 6 https://www.phoenixcontact.com/us/products/1410666 Connector - SACC-M12MS-8CON-PG11-M - 1410666 Accessories Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from O of 4.4 to 7 mm, any stripping length Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 1.2 Nm Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables Phoenix Contact 2019 (c) - all rights reserved http://www.phoenixcontact.com 07/08/2019 Page 6 / 6