MURB1620CTTRR - International Rectifier

Case Styles

MUR1620CT

TO-220AB

MURB1620CT

D2PAK

MURB1620CT-1

TO-262

VRRM Peak Repetitive Peak Reverse Voltage 200 V

IF(AV) Average Rectified Forward Current Per Leg 8.0 A

Total Device, (Rated VR ), TC = 150°C Total Device 16

IFSM Non Repetitive Peak Surge Current Per Leg 100

IFM Peak Repetitive Forward Current Per Leg 16

(Rated VR , Square wave, 20 KHz), TC = 150°C

TJ, TSTG Operating Junction and Storage Temperatures -65 to 175 °C

Parameters Max Units

MUR1620CT

MURB1620CT

MURB1620CT-1

Bulletin PD-20718 rev. C 12/03

trr = 25ns

IF(AV) = 16Amp

VR = 200V

• Ultrafast Recovery Time

• Low Forward Voltage Drop

• Low Leakage Current

• 175°C Operating Junction Temperature

Features

Description/ Applications

International Rectifier's MUR.. series are the state of the art Ultra fast recovery rectifiers specifically designed with

optimized performance of forward voltage drop and ultra fast recovery time.

The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and

reliability characteristics.

These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-

wheeling diode in low voltage inverters and chopper motor drives.

Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over

dissipation in the switching element and snubbers.

Absolute Maximum Ratings

Ultrafast Rectifier

www.irf.com

MUR1620CT, MURB1620CT, MURB1620CT-1

Bulletin PD-20718 rev. C 12/03

2www.irf.com

trr Reverse Recovery Time --35 ns IF = 1.0A, diF/dt = 50A/µs, VR = 30V

--25 I

F = 0.5A, IR = 1.0A, IREC = 0.25A

-20- T

J = 25°C

34 TJ = 125°C

IRRM Peak Recovery Current - 1.7 - A TJ = 25°C

- 4.2 - TJ = 125°C

Qrr Reverse Recovery Charge - 23 - nC TJ = 25°C

-75- T

J = 125°C

Parameters Min Typ Max Units

TJMax. Junction Temperature Range - - - 65 to 175 °C

TStg Max. Storage Temperature Range - - - 65 to 175

RthJC Thermal Resistance, Junction to Case Per Leg - - 3.0

RthJA Thermal Resistance, Junction to Ambient Per Leg - - 50

RthCS Thermal Resistance, Case to Heatsink - 0.5 -

Wt Weight - 2.0 - g

- 0.07 - (oz)

Mounting Torque 6.0 - 12 Kg-cm

5.0 - 10 lbf.in

VBR, VrBreakdown Voltage, 200 - - V IR = 100µA

Blocking Voltage

VFForward Voltage - - 0.975 V IF = 8A

- - 0.895 V IF = 8A, TJ = 150°C

IRReverse Leakage Current - - 5 µA VR = VR Rated

- - 250 µA TJ = 150°C, VR = VR Rated

CTJunction Capacitance - 25 - pF VR = 200V

LSSeries Inductance - 8.0 - nH Measured lead to lead 5mm from package body

Electrical Characteristics @ TJ = 25°C (unless otherwise specified)

Thermal - Mechanical Characteristics

Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)

IF = 8A

VR = 160V

diF /dt = 200A/µs

c Mounting Surface, Flat, Smooth and Greased

°C/W

Parameters Min Typ Max Units Test Conditions

Bulletin PD-20718 rev. C 12/03

MUR1620CT, MURB1620CT, MURB1620CT-1

www.irf.com

Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage

Fig. 1 - Typical Forward Voltage Drop Characteristics

Fig. 4 - Max. Thermal Impedance Z thJC Characteristics

Forward Voltage Drop - VFM (V)

Instantaneous Forward Current - I F

(A)

Reverse Voltage - VR (V)

Junction Capacitance - C T (pF)

t1, Rectangular Pulse Duration (Seconds)

Thermal Impedance Z thJC (°C/W)

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage

0.1

100

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8

T = 175˚C

T = 150˚C

T = 25˚C

0.001

0.01

0.1

100

0 50 100 150 200 250

150˚C

125˚C

100˚C

25˚C

T = 175˚C

100

1000

1 10 100 1000

T = 25˚C

Reverse Current - I R

(µA)

0.01

0.1

0.00001 0.0001 0.001 0.01 0.1 1

Single Pulse

(Thermal Resistance)

D = 0.50

D = 0.20

D = 0.10

D = 0.05

D = 0.02

D = 0.01

Notes:

1. Duty factor D = t1/t 2

2. Peak Tj = Pdm x ZthJC + Tc

MUR1620CT, MURB1620CT, MURB1620CT-1

Bulletin PD-20718 rev. C 12/03

4www.irf.com

Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current

Fig. 6 - Forward Power Loss Characteristics

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);

PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR

Average Forward Current - IF(AV)

(A) Average Forward Current - IF(AV) (A)

Allowable Case Temperature (°C)

Average Power Loss ( Watts )

trr ( ns )

Qrr ( nC )

/dt (A/µs )

di F

/dt (A/µs )

120

160

200

100 1000

= 30 A

= 15 A

= 8 A

V = 160V

T = 125˚C

T = 25˚C

100 1000

= 30 A

= 15 A

= 8 A

V = 160V

T = 125˚C

T = 25˚C

130

140

150

160

170

180

036912

Square wave (D = 0.50)

Rated Vr applied

see note (2)

036912

RMS Limit

D = 0.01

D = 0.02

D = 0.05

D = 0.10

D = 0.20

D = 0.50

Fig. 8 - Typical Stored Charge vs. di F /dt

Fig. 7 - Typical Reverse Recovery vs. di F /dt

Bulletin PD-20718 rev. C 12/03

MUR1620CT, MURB1620CT, MURB1620CT-1

www.irf.com

IRFP250

D.U.T.

L = 70µH

V = 200V

0.01

Ω

dif/dt

ADJUST

RRM

0.5

di(rec)M/dt

0.75 I

RRM

di /dt

Fig. 10 - Reverse Recovery Waveform and Definitions

Fig. 9- Reverse Recovery Parameter Test Circuit

Reverse Recovery Circuit

di F /dt

4. Qrr - Area under curve defined by t rr

and IRRM

5. di (rec) M / dt - Peak rate of change of

current during t b portion of t rr

1. diF/dt - Rate of change of current through zero

crossing

2. IRRM - Peak reverse recovery current

3. trr - Reverse recovery time measured from zero

crossing point of negative going IF to point where

a line passing through 0.75 IRRM and 0.50 IRRM

extrapolated to zero current

Q rr = t rr x I RRM

MUR1620CT, MURB1620CT, MURB1620CT-1

Bulletin PD-20718 rev. C 12/03

6www.irf.com

3.78 (0.15)

3.54 (0.14)

10.54 (0.41)

MAX.

DIA.

15.24 (0.60)

14.84 (0.58)

2.92 (0.11)

2.54 (0.10)

TERM 2

14.09 (0.55)

13.47 (0.53)

3.96 (0.16)

3.55 (0.14)

0.94 (0.04)

0.69 (0.03)

4.57 (0.18)

4.32 (0.17)

30.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.48 (0.25)

6.23 (0.24)

2°

0.10 (0.004)

1.40 (0.05)

1.15 (0.04)

2.89 (0.11)

2.64 (0.10)

2.04 (0.080) MAX.

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

NODE

Conforms to JEDEC Outline TO-220AB

Dimensions in millimeters and (inches)

Outline Table

Dimensions in millimeters and (inches)

Modified JEDEC outline TO-262

Bulletin PD-20718 rev. C 12/03

MUR1620CT, MURB1620CT, MURB1620CT-1

www.irf.com

10.16 (0.40)

REF.

8.89 (0.35)

4.57 (0.18)

4.32 (0.17)

0.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.47 (0.25)

6.18 (0.24)

93°

REF.

2.61 (0.10)

2.32 (0.09)

5.28 (0.21)

4.78 (0.19)

4.69 (0.18)

4.20 (0.16)

0.55 (0.02)

0.46 (0.02)

14.73 (0.58)

15.49 (0.61)

1.40 (0.055)

1.14 (0.045)

0.93 (0.37)

0.69 (0.27)

11.43 (0.45)

17.78 (0.70)

8.89 (0.35)

3.81 (0.15)

2.08 (0.08)

2.54 (0.10)

MINIMUM RECOMMENDED FOOTPRINT

Conforms to JEDEC Outline D 2 PAK

Dimensions in millimeters and (inches)

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

NODE

Outline Table

Ordering Information Table

Device Code

1- Ultrafast MUR Series

2-B = D

2Pak / TO-262

None = TO-220AB

3- Current Rating (16 = 16A)

4- Voltage Rating (20 = 200V)

5- CT = Center Tap (Dual) TO-220 /D2PAK/ TO-262

6- "-1" = TO-262 Option

MUR B 16 20 CT -1

MUR1620CT, MURB1620CT, MURB1620CT-1

Bulletin PD-20718 rev. C 12/03

8www.irf.com

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 12/03

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.

Qualification Standards can be found on IR's Web site.