Revised February 2005 74VHCT04A Hex Inverter General Description Features The VHCT04A is an advanced high speed CMOS Inverter fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. High speed: tPD The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output. Protection circuits ensure that 0V to 7V can be applied to the input pins without regard to the supply voltage and to the output pins with VCC 0V. These circuits prevent device destruction due to mismatched supply and input/ output voltages. This device can be used to interface 3V to 5V systems and two supply systems such as battery backup. Low noise: VOLP 4.7 ns (typ) at TA High noise immunity: VIH 2.0V, VIL 25qC 0.8V Power down protection is provided on all inputs and outputs 1.0V (max) Low power dissipation: ICC 2 PA (max) @ TA 25qC Pin and function compatible with 74HCT04 Ordering Code: Order Number Package Package Description Number 74VHCT04AM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHCT04AMX_NL (Note 1) M14A Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHCT04ASJ M14D Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHCT04AMTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74VHCT04AMTCX_NL (Note 1) MTC14 Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74VHCT04AN N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74VHCT04ANX_NL (Note 1) N14A Pb-Free 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Pb-Free package per JEDEC J-STD-020B. Note 1: "_NL" indicates Pb-Free package (per JEDEC J-STD-020B). Used this number to order device. (c) 2005 Fairchild Semiconductor Corporation DS500024 www.fairchildsemi.com 74VHCT04A Hex Inverter June 1997 74VHCT04A Logic Symbol Connection Diagram Pin Descriptions Truth Table Pin Names Description An Inputs On Outputs www.fairchildsemi.com 2 A O L H H L Recommended Operating Conditions (Note 6) 0.5V to 7.0V 0.5V to 7.0V Supply Voltage (VCC) DC Input Voltage (VIN) 4.5V to 5.5V Supply Voltage (VCC) DC Output Voltage (VOUT) 0V to 5.5V Input Voltage (VIN) 0.5V to VCC 0.5V 0.5V to 7.0V 20 mA (Note 3) (Note 4) Input Diode Current (IIK) Output Voltage (VOUT) Output Diode Current (IOK) (Note 3) 0V to VCC (Note 4) 0V to 5.5V 40qC to 85qC Operating Temperature (TOPR) r20 mA r25 mA r50 mA 65qC to 150qC (Note 5) DC Output Current (IOUT) DC VCC/GND Current (ICC) Storage Temperature (TSTG) Input Rise and Fall Time (tr, tf) VCC Lead Temperature (TL) 260qC (Soldering, 10 seconds) 5.0V r 0.5V 0 ns/V a 20 ns/V Note 2: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. Note 3: HIGH or LOW state. IOUT absolute maximum rating must be observed. Note 4: VCC 0V. Note 5: VOUT GND, V OUT ! VCC (Outputs Active) Note 6: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VCC (V) Parameter 40qC to 85qC TA Max Min 4.5 2.0 2.0 Input Voltage 5.5 2.0 2.0 Max 4.5 0.8 0.8 Input Voltage 5.5 0.8 0.8 HIGH Level 4.5 LOW Level 4.40 4.5 IIN Input Leakage Current ICC Quiescent Supply Current ICCT Maximum ICC/Input 4.50 3.94 0.0 Units Conditions V LOW Level Output Voltage IOFF Typ HIGH Level Output Voltage VOL 25qC TA Min V 4.40 V 3.80 V 0.1 0.1 V VIN VIL VIN VIH 50 PA IOH IOH 8 mA IOL 50 PA IOL 8 mA 0.36 0.44 V 0 5.5 r0.1 r1.0 PA VIN 5.5V or GND 5.5 2.0 20.0 PA VIN VCC or GND VIN 3.4V Output Leakage Current (Power Down State) 5.5 1.35 1.50 mA 0.0 0.5 5.0 PA Other Inputs VCC or GND 5.5V VOUT Noise Characteristics Symbol Parameter TA 25qC VCC (V) Typ Limits Units Conditions VOLP (Note 7) Quiet Output Maximum Dynamic VOL 5.0 0.8 1.0 V CL 50 pF VOLV (Note 7) Quiet Output Minimum Dynamic VOL 5.0 0.8 1.0 V CL 50 pF VIHD (Note 7) Minimum HIGH Level Dynamic Input Voltage 5.0 2.0 V CL 50 pF VILD (Note 7) Maximum LOW Level Dynamic Input Voltage 5.0 0.8 V CL 50 pF Note 7: Parameter guaranteed by design. 3 www.fairchildsemi.com 74VHCT04A Absolute Maximum Ratings(Note 2) 74VHCT04A AC Electrical Characteristics Symbol tPHL Parameter Propagation Delay tPLH CIN Input Capacitance CPD Power Dissipation Capacitance VCC (V) 5.0 r 0.5 TA Min 25qC TA 40qC to 85qC Typ Max Min Max 4.7 6.7 1.0 7.5 5.5 7.7 1.0 8.5 4 10 11 10 Units Conditions ns CL 15 pF CL 50 pF pF VCC pF OPEN (Note 8) Note 8: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) C PD * VCC * fIN ICC/6 (per gate). www.fairchildsemi.com 4 74VHCT04A Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 5 www.fairchildsemi.com 74VHCT04A Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 6 74VHCT04A Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 7 www.fairchildsemi.com 74VHCT04A Hex Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8