MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO General Description The MAX15006/MAX15007 ultra-low quiescent-current linear regulators are ideal for use in automotive and battery-operated systems. These devices operate from an input voltage of 4V to 40V, deliver up to 50mA of output current, and consume only 10A of quiescent current at no load. The internal p-channel pass device keeps the quiescent current low even at full load. The MAX15007 consumes only 3A current when in shutdown. The MAX15006A/MAX15007A have a fixed 3.3V output while the MAX15006B/MAX15007B have a fixed 5V output voltage. The MAX15006C/MAX15007C feature an adjustable output from 1.8V to 10V. The MAX15007 includes an enable input to turn the device on or off. All devices are short-circuit protected and include thermal shutdown. The MAX15006/MAX15007 operate over the -40C to +125C automotive temperature range. These devices are available in space-saving 3mm x 3mm 6-pin TDFN and 8-pin SO thermally enhanced packages. Applications Features Wide Operating Input Voltage Range (4V to 40V) Guaranteed 50mA Output Current Low Quiescent Current 10A (No Load) and 90A (Full Load) Operates Through Cold-Crank Condition Withstands 45V Load Dump Low Dropout Voltage of 300mV (MAX15006B/MAX15007B) Stable Operation with Tiny 2.2F Output Capacitor Enable Input (MAX15007) Preset 3.3V and 5.0V Output Voltages 1.8V to 10V Adjustable Output (MAX15006C/ MAX15007C) Thermal and Short-Circuit Protection -40C to +125C Operating Temperature Range Thermally Enhanced 3mm x 3mm 6-Pin TDFN/ 8-Pin SO Packages Ordering Information PART Automotive Tire-Pressure Monitoring Industrial Telecom Networking TEMP RANGE PINPACKAGE MAX15006AASA+ -40C to +125C 8 SO-EP* MAX15006AASA/V+ -40C to +125C 8 SO-EP* MAX15006AATT+ -40C to +125C 6 TDFN-EP* APE MAX15006AATT/V+ -40C to +125C 6 TDFN-EP* AUR +Denotes a lead(Pb)-free/RoHS-compliant package. /V denotes an automotive qualified part. *EP = Exposed pad. Ordering Information continued at end of data sheet. Pin Configurations TOP VIEW OUT OUT (FB) GND 6 5 4 MAX15006A MAX15006B MAX15006C IN N.C. 1 2 3 IN IN N.C. TDFN Pin Configurations continued at end of data sheet. 19-0663; Rev 8; 3/15 1 N.C. 2 EP + TOP MARK 3 N.C. 4 + MAX15006A MAX15006B MAX15006C EP SO ( ) FOR MAX15006C ONLY. 8 OUT 7 N.C. (FB) 6 N.C. 5 GND -- -- MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Absolute Maximum Ratings IN to GND...............................................................-0.3V to +45V EN to GND.............................................................-0.3V to +45V OUT, FB to GND....................................................-0.3V to +12V OUT Short-Circuit Duration........................................Continuous Maximum Current Into Any Pin (except IN and OUT).......50mA Continuous Power Dissipation (TA = +70C) TDFN (derate 23.8mW/C above +70C)...................1904mW SO (derate 18.90mW/C above +70C)................1509.40mW Operating Temperature Range.......................... -40C to +125C Junction Temperature.......................................................+150C Storage Temperature Range............................. -65C to +150C Lead Temperature (soldering, 10s).................................. +300C Soldering Temperature (reflow)........................................+260C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Thermal Characteristics (Note 1) TDFN Junction-to-Ambient Thermal Resistance (JA)...........42C/W Junction-to-Case Thermal Resistance (JC)..................9C/W SO Junction-to-Ambient Thermal Resistance (JA)...........53C/W Junction-to-Case Thermal Resistance (JC)..................7C/W Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. Electrical Characteristics (VIN = 14V, IOUT = 1mA, CIN = 0.1F, COUT = 2.2F, TA = TJ = -40C to +125C, unless otherwise noted. Typical specifications are a TA = +25C.) (Note 2) PARAMETER Input Voltage Range SYMBOL VIN CONDITIONS 17 15 IOUT = 0A (MAX15007A/B) 11 18 9 16 10.5 18 8.5 16 11.5 19 9.5 17 IOUT = 1mA (MAX15006A/B/D) IOUT = 100A (MAX15007A/B) Regulator on, measured at GND IOUT = 100A (MAX15007C) 12 20 IOUT = 1mA (MAX15006C) 10 18 IOUT = 1mA (MAX15007A/B) 13 21 IOUT = 1mA (MAX15007C) 11 19 IOUT = 50mA (MAX15006) 90 150 93 150 IOUT = 60mA (MAX15006D) 110 150 3 5 IOUT = 50mA (MAX15007) www.maximintegrated.com V 8 IOUT = 100A (MAX15006C) ISHDN UNITS 40 10 IOUT = 100A (MAX15006A/ B/D) Shutdown Supply Current MAX IOUT = 0A (MAX15006A/B/D) IOUT = 0A (MAX15007C) IGND TYP 4 IOUT = 0A (MAX15006C) Ground Current MIN Regulator off (MAX15007 only) A A Maxim Integrated 2 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Electrical Characteristics (continued) (VIN = 14V, IOUT = 1mA, CIN = 0.1F, COUT = 2.2F, TA = TJ = -40C to +125C, unless otherwise noted. Typical specifications are a TA = +25C.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS REGULATOR Guaranteed Output Current Output Voltage (Note 3) IOUT VOUT VIN VOUT + VDO 50 VIN VOUT + VDO (MAX15006D only) IOUT = 1mA MAX15006A/D, MAX15007A 3.25 3.3 3.35 MAX15006B/MAX15007B 4.925 5.0 5.075 MAX15006C/MAX15007C 1.8 VDO 30 53 30 60 IOUT = 50mA, MAX15006B/MAX15007B 300 525 300 600 IOUT = 50mA, MAX15006C/MAX15007C IOUT = 50mA, MAX15006A/MAX15007A 1000 6V VIN 35V, IOUT = 1mA 0.25 IOUT = 60mA, MAX15006D Line Regulation Load Regulation 0.7 1.5 VIN = VOUT + 3V, IOUT = 100A to 60mA (MAX15006D) 0.7 1.5 80 100Hz to 100kHz, IOUT = 50mA, COUT = 2.2F Output Voltage Noise Power-Supply Rejection Ratio FB Threshold Voltage FB Input Current ENABLE LOGIC Enable Threshold Voltage Enable Threshold Hysteresis PSRR VFB IFB VOUT = 3.3V ILOAD = 1mA (MAX15006C/MAX15007C only) VFB = 0V, 1.5V (MAX15006C/MAX15007C only) VIL 350 115 VOUT = 5V f = 100Hz, VIN_RIPPLE = 500mVP-P, IOUT = 50mA 66 1.2 -100 V +100 nA 60 0.5 Enable to Regulation Time (Note 6) 0.4 mA 1.26 1.4 Internally pulled down to GND % dB 1.23 Enable Pulldown Current % VRMS 179 0.4 VIH mV 1000 VIN = VOUT + 3V, IOUT = 100A to 50mA Output Current Limit V 10 IOUT = 5mA, MAX15006B/MAX15007B IOUT = 5mA, MAX15006C/MAX15007C Dropout Voltage (Notes 4, 5) mA 60 V mV A 2 ms THERMAL SHUTDOWN Thermal Shutdown Thermal Shutdown Hysteresis Note Note Note Note TSHDN THYST Junction temperature rising +165 C 20 C 2: 3: 4: 5: Limits at TA = -40C are guaranteed by design. Output voltage regulation is guaranteed for IOUT 5A. Dropout voltage is defined as (VIN - VOUT) when VOUT is 2% below the value of VOUT when VIN = VOUT + 3V. For VOUT = 3.3V, the 700mV dropout indicates VOUT does not reach 2% below VOUT at VIN = VOUT + 3V at minimum 4V input voltage. Note 6: Enable to regulation time is the time the output takes to reach 95% of its final value with VIN = 14V and EN is taken from VIL to VIH in 5ns. www.maximintegrated.com Maxim Integrated 3 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Typical Operating Characteristics (VIN = 14V, CIN = 0.1F, COUT = 2.2F, VEN = VIN, TA = +25C, unless otherwise noted.) 3.0 2.7 5.0 4.5 2.5 0 5 10 15 20 25 30 35 40 3.30 3.27 3.18 IOUT = 0 0 5 10 15 20 25 30 35 3.15 40 -25 0 25 50 75 100 125 150 TEMPERATURE (C) OUTPUT VOLTAGE vs. TEMPERATURE (MAX15006B/MAX15007B) DROPOUT VOLTAGE vs. LOAD CURRENT (MAX15006B/MAX15007B) GROUND CURRENT vs. LOAD CURRENT (MAX15006B/MAX15007B) 450 VDROPOUT (mV) 5.00 4.95 4.90 350 90 80 300 TA = -40C 250 200 60 40 30 100 20 4.80 50 10 4.75 0 IOUT = 50mA -50 -25 0 25 50 75 100 125 150 0 5 0 10 15 20 25 30 35 40 45 50 TA = +25C 50 150 4.85 TA = +125C 70 TA = +25C IGND (A) IOUT = 1mA 5.05 TA = +125C 400 100 MAX15006 toc05 MAX15006 toc04 500 MAX15006 toc06 VIN (V) 5.10 TA = -40C 0 5 10 15 20 25 30 35 40 45 50 IOUT (mA) IOUT (mA) GROUND CURRENT vs. TEMPERATURE (IOUT = 0) GROUND CURRENT vs. TEMPERATURE (IOUT = 50mA) SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE 99 98 10 VIN = +40V 8 VIN = +14V 6 VIN = +6V IGND (A) 12 9 8 97 7 96 6 ISHDN (A) 14 10 MAX15006 toc08 MAX15006 toc07 100 95 94 3 92 2 2 91 1 0 25 50 75 100 125 150 TEMPERATURE (C) www.maximintegrated.com 90 -50 -25 0 25 50 75 100 125 150 TEMPERATURE (C) VIN = +14V VIN = +6V 4 93 -25 VIN = +40V 5 4 -50 MAX15006 toc09 TEMPERATURE (C) 16 0 -50 VIN (V) 5.15 18 IOUT = 50mA 3.21 0.5 0 3.33 3.24 1.0 5.20 VOUT (V) 3.0 1.5 IOUT = 0 IOUT = 1mA 3.36 3.5 2.0 0.9 IGND (A) 3.39 VOUT (V) VOUT (V) VOUT (V) 2.1 1.8 1.5 1.2 5.25 3.42 4.0 2.4 0.6 0.3 0 3.45 OUTPUT VOLTAGE vs. TEMPERATURE (MAX15006A/MAX15007A) MAX15006 toc03 3.3 OUTPUT VOLTAGE vs. INPUT VOLTAGE (MAX15006B/MAX15007B) MAX15006 toc02 5.5 MAX15006 toc01 3.6 OUTPUT VOLTAGE vs. INPUT VOLTAGE (MAX15006A/MAX15007A) 0 -50 -25 0 25 50 75 100 125 150 TEMPERATURE (C) Maxim Integrated 4 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Typical Operating Characteristics (continued) (VIN = 14V, CIN = 0.1F, COUT = 2.2F, VEN = VIN, TA = +25C, unless otherwise noted.) 15 12 9 6 18 15 12 9 21 18 15 12 9 6 3 3 3 0 0 0 10.6 10.7 10.8 10.9 11.0 10.8 10.9 11.0 11.1 11.2 11.3 11.4 IGND (A) IGND (A) LOAD-TRANSIENT RESPONSE (MAX15006B/MAX15007B) INPUT-VOLTAGE STEP RESPONSE (MAX15006B/MAX15007B, IOUT = 1mA) MAX15006 toc13 400s/div 11.8 11.9 12.1 MAX15006 toc15 18V VIN 14V VIN 5V/div VOUT AC-COUPLED 100mV/div VOUT 2V/div MAX15006B/MAX15007B IOUT = 1mA 200s/div ENABLE STARTUP RESPONSE MAX15006 toc16 12.0 STARTUP RESPONSE 400s/div ENABLE STARTUP RESPONSE www.maximintegrated.com 11.7 MAX15006 toc14 50mA IOUT 1mA 400s/div 11.6 IGND (A) VOUT AC-COUPLED 200mV/div MAX15006B/MAX15007B IOUT = 0 MAX15007, IOUT = 0 50 UNITS TESTED 24 6 10.4 10.5 GROUND CURRENT DISTRIBUTION (TA = +125C) MAX15006 toc12 21 27 NUMBER OF UNITS 18 MAX15007, IOUT = 0 50 UNITS TESTED 24 NUMBER OF UNITS NUMBER OF UNITS 21 27 GROUND CURRENT DISTRIBUTION (TA = +25C) MAX15006 toc11 MAX15007, IOUT = 0 50 UNITS TESTED 24 MAX15006 toc10 27 GROUND CURRENT DISTRIBUTION (TA = -40C) ENABLE STARTUP RESPONSE MAX15006 toc18 MAX15006 toc17 EN 1V/div EN 1V/div EN 1V/div VOUT 2V/div VOUT 2V/div VOUT 2V/div MAX15006B/MAX15007B IOUT = 50mA 400s/div MAX15006B/MAX15007B VIN = 40V, IOUT = 0 400s/div Maxim Integrated 5 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Typical Operating Characteristics (continued) (VIN = 14V, CIN = 0.1F, COUT = 2.2F, VEN = VIN, TA = +25C, unless otherwise noted.) IOUT = 50mA -20 EN 1V/div COUT = 2.2F PSRR (dB) -30 VOUT 2V/div -40 -50 -60 -70 -80 MAX15006B/MAX15007B VIN = 40V, IOUT = 50mA COUT = 10F -90 -100 400s/div 0.01 0.1 1 10 100 1000 10 OUTPUT-NOISE SPECTRAL DENSITY vs. FREQUENCY MAX15006 toc21 0 -10 OUTPUT-NOISE SPECTRAL DENSITY (V/Hz) MAX15006 toc19 MAX15006 toc20 POWER-SUPPLY REJECTION RATIO vs. FREQUENCY ENABLE STARTUP RESPONSE 1 0.1 0.01 MAX15006A/MAX15007A IOUT = 50mA 0.01 0.1 OUTPUT-NOISE SPECTRAL DENSITY vs. FREQUENCY 100 OUTPUT VOLTAGE NOISE vs. LOAD CURRENT 150 135 120 105 en (VRMS) 1 0.1 90 75 60 45 30 MAX15006B/MAX15007B IOUT = 50mA 0.01 1 10 0 100 MAX15006A/MAX15007A 0 5 10 15 20 25 30 35 40 45 50 FREQUENCY (kHz) IOUT (mA) FB VOLTAGE vs. INPUT VOLTAGE (MAX15007C, VOUT = 5V) FB VOLTAGE vs. TEMPERATURE (MAX15007C, VOUT = 5V) 1.230 MAX15006 toc24 1.230 0.1 15 1.229 MAX15006 toc25 0.01 10 MAX15006 toc23 10 1 FREQUENCY (kHz) MAX15006 toc22 OUTPUT-NOISE SPECTRAL DENSITY (V/Hz) FREQUENCY (kHz) 1.229 1.228 VFB (V) VFB (V) 1.227 1.228 1.227 1.226 1.225 1.224 1.223 1.226 1.222 1.221 1.225 5 10 15 20 25 VIN (V) www.maximintegrated.com 30 35 40 1.220 -50 -25 0 25 50 75 100 125 150 TEMPERATURE (C) Maxim Integrated 6 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Typical Operating Characteristics (continued) (VIN = 14V, CIN = 0.1F, COUT = 2.2F, VEN = VIN, TA = +25C, unless otherwise noted.) CLAMPED LOAD DUMP (IOUT = 0) OUTPUT VOLTAGE NOISE vs. OUTPUT CAPACITANCE MAX15006 toc27 MAX15006 toc26 150 135 120 40V VIN en (VRMS) 105 90 13.5V 75 60 VOUT AC-COUPLED 20mV/div 45 30 MAX15006A/MAX15007A IOUT = 25mA 15 0 0 2 4 6 100ms/div 8 10 12 14 16 18 20 22 COUT (F) Pin Description PIN MAX15006A/B MAX15006C MAX15007A/B MAX15007C NAME FUNCTION TDFN SO TDFN SO TDFN SO TDFN SO 1, 2 1 1, 2 1 1, 2 1 1, 2 1 IN 3 2, 3, 4, 6, 7 3 2, 3, 4, 6 -- 2, 4, 6, 7 -- 2, 4, 6 N.C. No Connection. Not internally connected. 4 5 4 5 4 5 4 5 GND Ground 5, 6 8 6 8 5, 6 8 6 8 OUT Regulator Output. Bypass OUT to GND with a low-ESR capacitor with a minimum 2.2F. -- -- -- -- -- -- 5 -- -- www.maximintegrated.com 7 -- -- -- 3 -- -- 3 -- 5 3 -- 7 3 -- Regulator Supply Input. Supply voltage ranges from 4V to 40V. Bypass with a 0.1F capacitor to GND. FB Feedback Regulation Set-Point. Connect an external resistive divider network from OUT to FB to GND to adjust the output voltage from 1.8V to 10V. EN Active-High Enable Input. Force EN high (or connect to VIN) to turn the regulator on. Pull EN low (or leave unconnected) to place the device in a low-power shutdown mode. EN is internally pulled down to GND through a 0.5A sink current. EP Exposed Pad. Internally connected to GND. Connect EP to the ground plane for enhanced thermal performance. Do not use EP as a ground connection. Maxim Integrated 7 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Functional Diagrams IN + THERMAL SENSOR 1.242V REF FET DRIVER WITH CURRENT LIMIT ERROR AMPLIFIER OUT FB (FOR MAX15006C ONLY) GND MAX15006 (FOR MAX15006A/B ONLY) Figure 1. MAX15006 Simplified Functional Diagram IN EN CONTROL LOGIC + THERMAL SENSOR 1.242V REF FET DRIVER WITH CURRENT LIMIT ERROR AMPLIFIER OUT FB (FOR MAX15007C ONLY) GND MAX15007 (FOR MAX150076A/B ONLY) Figure 2. MAX15007 Simplified Functional Diagram www.maximintegrated.com Maxim Integrated 8 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Detailed Description EN Input (MAX15007 Only) 55 VIN = 18V, VOUT = 5V OUTPUT CURRENT (mA) 50 45 VIN = 18V, VOUT = 3.3V 40 35 MAX15006 fig03a The regulator accepts an input voltage from 4V to 40V. The MAX15006A/MAX15007A have a fixed 3.3V output voltage while the MAX15006B/MAX15007B offer a fixed 5V output voltage. The MAX15006C/MAX15007C feature an adjustable voltage output by connecting an external resistive divider from OUT to FB and to GND (see the Output Voltage Setting section). 30 25 VIN = 26V, VOUT = 5V 20 15 10 VIN = 26V, VOUT = 3.3V 5 0 Thermal Protection When the junction temperature exceeds +165C, an internal thermal sensor turns the pass transistor off, and allows the device to cool. The thermal sensor turns the pass transistor on again after the junction temperature cools by 20C. This results in a cycled output during continuous thermal-overload conditions. Thermal protection protects the MAX15006/MAX15007 in the event of fault conditions. Operation at TJ = +150C without going into thermal shutdown is not guaranteed. Use Figures 3a and 3b to determine the minimum guaranteed output current. Output Short-Circuit Current Limit The MAX15006/MAX15007 feature a 175mA current limit. The output can be shorted to GND for an indefinite period of time without damage to the device. During a short circuit, the power dissipated across the pass transistor can quickly heat the device. When the die temperature reaches +165C, the MAX15006/MAX15007 shut down 55 VIN = 18V, VOUT = 5V 50 45 VIN = 18V, VOUT = 3.3V 40 35 MAX15006 fig03b Regulator EN is an active-high, logic-level enable input that turns the device on or off. Drive EN high to turn the device on. An internal 0.5A pulldown current keeps the MAX15007 in shutdown mode when driven by a three-state driver in high-impedance mode, or an open-drain driver. While in shutdown, the device consumes only 3A (typ). EN withstands voltages up to 40V, allowing it to be driven by high input level voltages or connected to IN for always-on operation. OUTPUT CURRENT (mA) The MAX15006/MAX15007 high-voltage linear regulators operate over a 4V to 40V input voltage range. These devices guarantee 50mA load drive, and offer preset output voltages of +3.3V (MAX15006A/MAX15007A) or +5V (MAX15006B/MAX15007B) or an adjustable voltage output from 1.8V to 10V (MAX15006C/MAX15007C). Thermal shutdown and short-circuit protection prevent damage during overtemperature and overcurrent conditions. The MAX15007 includes an enable input (EN) allowing the regulators to be turned on/off using a logiclevel voltage. Driving EN high turns on the device while driving EN low places the device in a low-power shutdown mode. In shutdown, the supply current is reduced to 3A (typ). The MAX15006/MAX15007 operate over the -40C to +125C automotive temperature range. All devices are available in thermally enhanced 6-pin TDFN and 8-pin SO packages capable of dissipating 1.904W and 1.509W at TA = +70C, respectively. 30 25 20 VIN = 26V, VOUT = 5V 15 10 VIN = 26V, VOUT = 3.3V 5 80 85 90 95 100 105 110 115 120 125 130 AMBIENT TEMPERATURE (C) Figure 3a. Minimum Output Current vs. Ambient Temperature (6-Pin TDFN-EP) www.maximintegrated.com 0 80 85 90 95 100 105 110 115 120 125 130 AMBIENT TEMPERATURE (C) Figure 3b. Minimum Output Current vs. Ambient Temperature (8-Pin SO-EP) Maxim Integrated 9 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO and automatically restart after the die temperature cools by 20C. Applications Information Output Voltage Setting 1.9048W for TA + 70C PD = W 1.9048W - 0.0238 C x (TA - 70C) for + 70C < TA + 125C For the SO-EP package: 1.8605W for TA + 70C PD = W 1.8605W - 0.0233 C x (TA - 70C) for + 70C < TA + 125C After determining the allowable package dissipation, calculate the maximum allowable output current, without exceeding the +150C junction temperature, using the following formula: where VFB = 1.23V and a 5A minimum current is required in the external divider for stability. Available Output Current Calculation The MAX15006/MAX15007 provide up to 50mA of continuous output current. The input voltage range extends to 40V. Package power dissipation limits the amount of output current available for a given input/output voltage and ambient temperature. Figure 5 shows the maximum allowable power dissipation for these devices to keep the junction temperature below +150C. Figure 5 assumes that the exposed metal pad of the MAX15006/MAX15007 is soldered to 1in2 of PCB copper. Use Figure 5 to determine the allowable package dissipation for a given ambient temperature. Alternately, use the following formulas to calculate the allowable package dissipation. For the TDFN package: 0.1F R1 MAX15007C OFF EN R2 GND VOUT = VFB (1 + R1/R2) VFB = 1.23V Figure 4. Setting the Adjustable Output Voltage www.maximintegrated.com TA = +125C VIN = 26V VOUT = 3.3V Calculate the maximum allowable package dissipation at the given temperature as follows: = PD 1.9048W - 0.0238 2.2F FB ON Example 1 (TDFN Package): +1.8V TO +10V OUT IN The above equations do not include the negligible power dissipation from self-heating due to the IC ground current. PD (W) +4V TO +40V PD 50mA VIN - VOUT = I OUT(MAX) 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 W 70C) (125C -= C 595.8mW MAX15006 fig04 The MAX15006C/MAX15007C provide an adjustable output voltage from 1.8V to 10V and do not operate in a preset output voltage mode. Connect an external resistive divider from OUT to FB to GND as shown in Figure 4 to set the desired output voltage. VOUT is calculated as follows: R1 VOUT= VFB x 1 + R2 1.9408W (6-PIN TDFN) DERATE 23.8mW/C 1.8605W (8-PIN SO-EP) DERATE 23.3mW/C 0 20 60 80 100 120 140 40 TEMPERATURE (C) Figure 5. Calculated Maximum Power Dissipation vs. Ambient Temperature Maxim Integrated 10 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO And establish the maximum output current: I= OUT(MAX) Find the maximum output current: 595.8mW = 26.2mA 26V - 3.3V 1.9048W I OUT(MAX) = 476mA IOUT(MAX) = 50mA = 9V - 5V Example 2 (TDFN Package): In Examples 2 and 3, the maximum output current is calculated as 172mA and 476mA, respectively; however, the allowable output current cannot exceed 50mA. TA = +85C VIN = 14V VOUT = 5V Calculate the maximum allowable package dissipation at the given temperature as follows: W = PD 1.9048W - 0.0238 (85C -= 70C) 1.5478W C Then determine the maximum output current: 1.5478W I OUT(MAX) = 172mA IOUT(MAX) = 50mA = 14V - 5V Example 3 (TDFN Package): TA = +50C VIN = 9V VOUT = 5V Alternately, use Figures 6a and 6b to quickly determine the maximum allowable output current for selected ambient temperatures and input voltages. Output-Capacitor Selection and Regulator Stability For stable operation over the full temperature range and with load currents up to 50mA, use a low-ESR 2.2F (min) ceramic or tantalum output capacitor. Use larger outputcapacitor values such as 22F to reduce noise, improve load-transient response, and power-supply rejection. Some ceramic dielectrics exhibit large capacitance and ESR variations with temperature. Ensure the minimum capacitance under worst-case conditions does not drop below 1.3F to ensure output stability. With an X7R dielectric, 2.2F should be sufficient at all operating temperatures. Calculate the maximum allowable package dissipation at the given temperature as follows: PD = 1.9048W 35 30 25 TA = +85C TA = +125C VOUT = 5V 6-PIN TDFN 0 5 10 15 20 25 30 35 40 VIN (V) Figure 6a. Calculated Maximum Output Current vs. Input Voltage (6-Pin TDFN-EP) www.maximintegrated.com MAX15006 fig05b MAX15006 fig05a TA = +70C 40 20 15 10 5 0 60 55 50 45 IOUT(MAX) (mA) IOUT(MAX) (mA) 60 55 50 45 TA = +70C 40 35 30 25 20 15 10 5 0 TA = +85C TA = +125C VOUT = 5V 8-PIN SO-EP 0 5 10 15 20 25 30 35 40 VIN (V) Figure 6b. Calculated Maximum Output Current vs. Input Voltage (8-Pin SO-EP) Maxim Integrated 11 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Selector Guide PART ENABLE INPUT FIXED OUTPUT VOLTAGE (V) ADJUSTABLE OUTPUT VOLTAGE (V) MAX15006AASA+ -- 3.3 -- 8 SO-EP MAX15006AATT+ -- 3.3 -- 6 TDFN-EP MAX15006BASA+ -- 5 -- 8 SO-EP MAX15006BATT+ -- 5 -- 6 TDFN-EP MAX15006CASA+ -- -- ADJ (1.8 to 10) 8 SO-EP MAX15006CATT+ -- -- ADJ (1.8 to 10) 6 TDFN-EP MAX15007AASA+ 3.3 -- 8 SO-EP MAX15007AATT+ 3.3 -- 6 TDFN-EP MAX15007BASA+ 5 -- 8 SO-EP MAX15007BATT+ 5 -- 6 TDFN-EP MAX15007CASA+ -- ADJ (1.8 to 10) 8 SO-EP MAX15007CATT+ -- ADJ (1.8 to 10) 6 TDFN-EP PIN-PACKAGE Pin Configurations (continued) TOP VIEW OUT OUT (FB) GND 6 5 4 MAX15007A MAX15007B MAX15007C EP + 1 2 3 IN IN EN TDFN www.maximintegrated.com IN 1 N.C. 2 EN 3 N.C. 4 + MAX15007A MAX15007B MAX15007C EP 8 OUT 7 N.C. (FB) 6 N.C. 5 GND SO ( ) FOR MAX15007C ONLY. Maxim Integrated 12 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Chip Information Ordering Information (continued) PART TEMP RANGE PINPACKAGE TOP MARK MAX15006BASA+ -40C to +125C 8 SO-EP* -- MAX15006BASA/V+ -40C to +125C 8 SO-EP* -- MAX15006BATT+ -40C to +125C 6 TDFN-EP* APF MAX15006BATT/V+ -40C to +125C 6 TDFN-EP* AUN MAX15006CATT+ -40C to +125C 6 TDFN-EP* API MAX15006CATT/V+ -40C to +125C 6 TDFN-EP* AVA MAX15006DATT/V+ -40C to +125C 6 TDFN-EP* AVL MAX15007AASA+ -40C to +125C 8 SO-EP* MAX15007AATT+ -40C to +125C 6 TDFN-EP* MAX15007BASA+ -40C to +125C 8 SO-EP* MAX15007BATT+ -40C to +125C 6 TDFN-EP* APH MAX15007BATT/V+ -40C to +125C 6 TDFN-EP* AVK MAX15007CATT+ -40C to +125C 6 TDFN-EP* APJ MAX15007CATT/V+ -40C to +125C 6 TDFN-EP* AUU PROCESS: BiCMOS Package Information For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. -- PACKAGE TYPE APG -- PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 6 TDFN-EP T633+2 21-0137 90-0058 8 SO-EP S8E+12 21-0111 90-0150 +Denotes a lead(Pb)-free/RoHS-compliant package. /V denotes an automotive qualified part. *EP = Exposed pad. www.maximintegrated.com Maxim Integrated 13 MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Revision History REVISION NUMBER REVISION DATE PAGES CHANGED 0 10/06 Initial release 1 5/08 Added MAX15006C/MAX15007C adjustable version to data sheet including Ordering Information, Electrical Characteristics, Pin Description, and Detailed Description 1-14 2 11/09 Added the MAX15006A/MAX15006B automotive packages to the Ordering Information 1, 13 3 12/10 Added the MAX15006CATT and MAX15007CATT automotive packages to the Ordering Information 13 4 7/11 Added the MAX15006AASA and MAX15006BASA automotive packages to the Ordering Information 1, 13 5 11/11 Changed the maximum IOUT = 50mA dropout of the MAX15006A/MAX15007A from 700mV to 1000mV 6 1/13 Added MAX15006DATT/V and MAX15007BATT/V 7 8/14 Corrected thermal resistance data in Package Thermal Characteristics section 2 8 3/15 Corrected continuous power dissipation for SO package in Absolute Maximum Ratings 2 DESCRIPTION -- 3 1-14 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated's website at www.maximintegrated.com. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. (c) 2015 Maxim Integrated Products, Inc. 14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX15006AASA+ MAX15006BASA+ MAX15007AASA+ MAX15007BASA+ MAX15007CATT/V+T MAX15006CATT/V+T MAX15006BASA/V+ MAX15006BASA/V+T MAX15006AASA+T MAX15006AATT+T MAX15006AATT/V+T MAX15006BASA+T MAX15006BATT+T MAX15006CATT+T MAX15007AASA+T MAX15007AATT+T MAX15007BASA+T MAX15007BATT+T MAX15007CATT+T MAX15006BATT/V+T MAX15007AATT+TW MAX15007BATT/V+