SCHOTTKY BARRIER RECTIFIER
VOLTAGE 30 Volts CURRENT 10 Ampere
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
resistive or inductive load.
SR1030CK
D-PAK
MAXIMUM RATINGS
(@ TA=25
OC unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(@TA=25
OC unless otherwise noted)
Dimensions in inches and (millimeters)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Case Temperature
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
SYMBOL
V
RRM
V
DC
I
FSM
C
J
T
STG
V
RMS
UNITS
Volts
Volts
Volts
Amps10
150
60
3
200
Amps
0
C/W
0
C
Storage Temperature Range
Rq
JA
Rq
JC
I
O
pF
Operating Temperature Rang e T
J
150
-55 to + 150
0
C
SR1030CK
SR1030CK
30
30
21
NOTES : 1.Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
4. Suffix "R" for Reverse Polarity.
5. Suffix "S" for D2-PAK Pkg.
2010-05
REV: O
CHARACTERISTICS
Maximum Average Reverse Current
at Rated DC Blocking Voltage
V
F
SYMBOL
I
R
mA
Maximum Instantaneous Forward Voltage at 5.0A DC Volts
0.2
2
@T
A
= 25
o
C
@T
A
= 100
o
CmA
UNITS
.85
FEATURES
* High reliability
* Low switching loss
* Low forward voltage drop
* High current capability
* High switching capability
* Epoxy: Device has UL flammability classification 94V-O
* Case: Molded plastic
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting: position: Any
* Weight: 0.33 grams
MECHANICAL DA TA
.264 (6.7)
.248 (6.3).098 (2.5)
.083 (2.1)
.024 (0.6)
.016 (0.4)
.051 (1.3)
.035 (0.9)
.244 (6.2)
.228 (5.8)
.398 (10.11)
.382 (9.71)
TYP 1.00
.217 (5.5)
.201 (5.1)
.031 (0.8)
.016 (0.4)
.183 (4.65)
TYP .091
(2.30) TYP .020
(0.50)
.179 (4.55)
PIN 1
PIN 2
PIN 3
HEATSINK
PIN1 PIN2
PIN3
6. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
Typical Current Squared Time 93.3 A2SI2T
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (mA)
CASE TEMPERATURE, (OC)
0
0.01
0.1
1.0
10
100
AVERAGE FORWARD CURRENT, (A)
CJ, JUNCTION CAPACITANCE, (nF)
0
2
4
6
8
10
12
20 40 60 80 100 120 140
150100500
0 0.2 0.4 0.8 1.0 1.4 1.6
0.1
1.0
10
50
1.20.6 1.8
RATING AND CHARACTERISTICS CURVES ( SR1030CK )
FIG.3 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE FIG.2 TYPICAL REVERSE
CHARACTERISTICS
REVERSE VOLTAGE, (V)
INSTANTANEOUS FORWARD CURRENT, (A)
0.1
10
80
60
40
20
100
200
400
400.4 1.0 4 10 80100
FIG.4 TYPICAL JUNCTION CAPACITANCE
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
1
125
150
25
0
50
100
75
2 5 10 20 50 100
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Single Phase Half Wave
60Hz Inductive or
Resistive Load
0.375" (9.5mm) Lead Length
T
A
= 100 OC
T
A
= 25 OC
8.3mS Single Half Sine-Wave
JEDEC Method
T
J
= 25 OC
Pulse width=300mS
1% Duty Cycle
T
J
= 25 OC
Marking Description
V Y W W
S R 1 0 3 0 C
Rectron Logo
Year – code
(Y: Last digit of year &
A:2010,B:2011…...)
Week – code
(WW:01~52)
Part No.
Voltage-code
30-------30V
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
