Z-Bulk Metal® Foil Technology
RNC90Z to MIL-PRF-55182/9
Military and Space Established Reliability (ER)
Vishay Foil Resistors
Document Number: 63082 For any questions, contact: foil@vishaypg.com www.foilresistors.com
Revision: 25-Mar-10 1
INTRODUCTION
The RNC90Y has been the benchmark for high precision
established reliability discrete resistors since 1982. In 2000,
Vishay achieved a technological breakthrough with the
introduction of the commercial ultra precision low TCR Z201
resistor. This breakthrough has now allowed Vishay to
introduce an established reliability
“
R
”
level very low TCR
resistor. The RNC90Z TCR limit of ± 2 ppm/°C over the
extended range of - 55 °C to + 175 °C is a significant
improvement over the existing RNC90Y specification.
The RNC90Z is a direct replacement for the RNC90Y.
FEATURES
•
QPL product with established reliability (ER): meets
requirements of MIL-PRF-55182/9
•
Temperature coefficient of resistance (TCR): ± 2 ppm/°C
max. (- 55 °C to + 175 °C)
•
Load life stability: to 0.005 %, 0.3 W at + 125 °C for 2000 h
•
Resistance tolerance: to ± 0.005 %
•
Qualified resistance range: 30.1
Ω
to 121 k
Ω
(for other
values please check Z555)
•
Electrostatic discharge (ESD) above 25 000 V
•
Non inductive, non capacitive design
•
Current noise < - 42 dB
•
Thermal EMF: < 0.1 µV/°C
•
Fast thermal stabilization
•
Rise time: 1 ns without ringing
•
A radiation test has been performed in the past on Vishay’s
Foil Resistors
•
Prototype samples available from 72 h
•
“R” level high reliability resistor qualified to MIL-PRF-55182/9
FIGURE 1 - COMPARISON OF RNC90Y TO RNC90Z TEMPERATURE COEFFICIENT OF RESISTANCE
- 55 25 125 175
+ 300
+ 200
- 200
- 300
Temperature (
°
C)
Specification ± 2 ppm/°C
+ 500
- 500
- 55 25 125 175
+ 400
0
- 400
+ 1000
- 1000
Δ
R/R (ppm)
Temperature (
°
C)
Specification ± 5 ppm/°C± 10 ppm/°C
+ 1000
- 1000
+ 1000 + 1000
- 1000
- 1000
Z09CNRY09CNR
0
Δ
R/R (ppm)
+ 160
- 160
TABLE 1 - SPECIFICATIONS COMPARISON
SPECIFICATION
MIL-PRF-55182/9
CHARACTERISTIC Y LIMITS
QUALIFIED RNC90Y
MIL-PRF-55182/9
CHARACTERISTIC Z LIMITS
QUALIFIED RNC90Z
Temperature Coefficient of Resistance ± 5 ppm/°C (- 55 °C to + 125 °C)
± 10 ppm/°C (+ 125 °C to + 175 °C)
± 2 ppm/°C (- 55 °C to + 175 °C)
± 2 ppm/°C (+ 125 °C to + 175 °C)
Resistance Range 4.99 Ω to 121 kΩ30.1 Ω to 121 kΩ
Failure Rate Level R Level R
Load-Life Stability 0.3 W at + 125 °C
at 2000 h
at 10 000 h
± 0.05 % maximum ΔR
± 0.5 % maximum ΔR
± 0.05 % maximum ΔR
± 0.5 % maximum ΔR
Voltage Coefficient 0.0005 %/V 0.0005 %/V
Working Voltage 300 V maximum 300 V maximum
Military and Space Established Reliability (ER)
Vishay Foil Resistors
www.foilresistors.com For any questions, contact: foil@vishaypg.com Document Number: 63082
2Revision: 25-Mar-10
Note
1. ± 0.5 % and ± 1.0 % resistors available only in standard values
per MIL-PRF-55182
TABLE 2 - MODEL SELECTION
MODEL NUMBER
RESISTANCE
RANGE
(Ω)
STANDARD RESISTANCE
TOLERANCE FAILURE
RATE
AMBIENT
POWER RATING AVERAGE
WEIGHT
(g)
TIGHTEST % LOOSEST % at + 70 °C at + 125° C
RNC90Z (RNC90S) 30.1 Ω to 121 kΩ± 0.005 ± 1.0 R 0.6 W 0.3 W 0.6
FIGURE 2 - IMPRINTING AND DIMENSIONS
RNC90Z Military Approved Resistors DIMENSIONS
Note
1. 0.200" (5.08 mm) lead spacing available - specify RNC90S for RNC90Z
INCHES MILLIMETERS
W: 0.105 ± 0.010 2.67 ± 0.25
L: 0.300 ± 0.010 7.62 ± 0.25
H: 0.326 ± 0.010 8.28 ± 0.25
ST: 0.015 ± 0.005 0.381 ± 0.13
SW: 0.040 ± 0.006 1.02 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.150 ± 0.0051) 3.81 ± 0.13
LS
1)
Jan Designator
(Not Present If
Non-Qualified)
VISHAY
18612
XXXX J
ST
H
L
Mfr. Code
W
Resistance
Value Code
RNC90Z
100R01
B R
LL
SW
Manufacturers
Identification
Number
Model Number
Failure Rate Code
(Not Present If
Non-Qualified)
Resistance
Tolerance
Code
Front View Side View
Lead Material
#22 AWG
(0.025 Dia.)
Solder Coated
Copper
B
Factory
01
Year
11
Week
Rear View
FIGURE 3 - TRIMMING TO VALUES
(Conceptual Illustration)
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Note: Foil shown in black, etched spaces in white
Interloop Capacitance
Reduction in Series
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Current Path
After Trimming
FIGURE 4 - POWER DERATING CURVE
250
200
150
100
50
0- 55 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temperature °C
Percent of Rated Power
+ 70 °C
Rated Power
TABLE 3 - RESISTANCE TOLERANCE
TOLERANCE SYMBOL
± 0.005 % V
± 0.01 % T
± 0.05 % A
± 0.1 % B
± 0.5 %1) D
± 1.0 %1) F
TABLE 4 - FAILURE RATE LEVEL (FRL)
FRL SYMBOL
± 0.01 % R
± 0.1 % P
± 1.0 % M
Military and Space Established Reliability (ER)
Vishay Foil Resistors
Document Number: 63082 For any questions, contact: foil@vishaypg.com www.foilresistors.com
Revision: 25-Mar-10 3
Note
* For non-standard requests, please contact application engineering.
TABLE 5 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1189100R500AR0L (preferred part number format)
DENOTES PRECISION VALUE LIFE FAILURE RATE (LFR) AER*
YR = Ω
K = kΩ
R = ± 0.01 %
P = ± 0.1 %
M = ± 1.0 %
0 = standard
1 - 999 = custom
PRODUCT CODE RESISTANCE TOLERANCE PACKAGING
1189 = RNC90Z
1506 = RNC90S V = ± 0.005 %
T = ± 0.01 %
A = ± 0.05 %
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
L= bulk pack
R= tape and reel
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1189 100R500 A R 0 L:
TYPE: RNC90Z
VALUE: 100.5 Ω
ABSOLUTE TOLERANCE: ± 0.05 %
LIFE FAILURE RATE (LFR): ± 0.01 %
AER: standard
PACKAGING: bulk pack
HISTORICAL PART NUMBER: RNC90Z 100R50 A R B (will continue to be used)
RNC90Z 100R50 A R B
MODEL OHMIC VALUE RESISTANCE
TOLERANCE
LIFE FAILURE
RATE (LFR) PA C K AG I N G
RNC90Z 100.5 ΩV = ± 0.005 %
T = ± 0.01 %
A = ± 0.05 %
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
R = ± 0.01 %
P = ± 0.1 %
M = ± 1.0 %
B = bulk pack
CAGE #18612
“Commercial and Government Entity”
Formerly “FSCM”
1891 0R50Y1 AR0 00 L
Military and Space Established Reliability (ER)
Vishay Foil Resistors
www.foilresistors.com For any questions, contact: foil@vishaypg.com Document Number: 63082
4Revision: 25-Mar-10
The response of military and non military grade resistors to environmental stresses can be made better by “Improved
Performance Testing” (IPT). The IPT part will see burn-in and cycling that removes the “knee” from the normal drift of non IPT
parts. (See Table 6 for the improvement to expect in military parts when calling for Vishay recommended screening). Users
should be aware that IPT testing renders the part non QPL and so a 3XXXXX part number will be assigned by Vishay. Consult
Applications Engineering for details and ordering advice.
TABLE 6 - IMPROVED PERFORMANCE TESTING (NON-QPL APPROVED) VS. QPL
TEST
GROUP TEST
RNC90Z
MIL-PRF-55182/9
VISHAY
IMPROVED PERFORMANCE
TESTING
(IPT) LIMITS
METHOD PARAGRAPH LIMITS
I Power Conditioning not done - ± 0.0025 %
Thermal Shock and 4.8.2 ± 0.05 % ± 0.0025 %
Overload Combined 4.8.3 ± 0.05 % ± 0.0025 %
II
Resistance Temperature
Characteristic
4.8.9 ± 2 ppm/°C < ± 2 ppm/°C
(- 55 °C to + 125 °C)
(Can be sorted for tighter tracking)
Low Temperature Storage 4.8.23 ± 0.05 % ± 0.0025 %
Low Temperature Operation 4.8.10 ± 0.05 % ± 0.0025 %
Terminal Strength 4.8.11 ± 0.02 % ± 0.001 %
III DWV 4.8.12 ± 0.02 % ± 0.001 %
Insulation Resistance 4.8.13 104 MΩ> 104 MΩ
Resistance to Soldering Heat 4.8.14 ± 0.02 % ± 0.001 %
Moisture Resistance 4.8.15 ± 0.05 % ± 0.015 %
IV Shock 4.8.16 ± 0.01 % ± 0.0025 %
Vibration 4.8.17 ± 0.02 % ± 0.0025 %
V Load Life at + 125 °C; 2000 h 4.8.18 ± 0.05 % ± 0.005 % (50 ppm)
Load Life at + 125 °C; 10 000 h 4.8.18 ± 0.5 % ± 0.015 % (150 ppm)
V (a) + 85 °C Power Rating - - ± 0.005 % (50 ppm)
+ 70 °C Power Rating 4.8.18 ± 0.05 % ± 0.005 % (50 ppm)
V (b) + 25 °C Power Rating - - ± 0.005 % (50 ppm)
VI Storage Life - - ± 0.0025 %
VII High Temperature Exposure 4.8.19 ± 0.5 % ± 0.005 %
VIII Max. Allowance Reactance - - < 1 %
Current Noise - - < - 32 dB
Voltage Coefficient 4.8.20 0.0005 %/V < 0.00001 %/V
- (5 ppm/V) (< 0.1 ppm/V)
Thermal EMF - - 0.1 µV/°C
FIGURE 4 - IPT IMPRINTING AND DIMENSIONS in inches (millimeters)
0.150 ± 0.005
(3.81 ± 0.13)
VISHAY
XXXX
3XXXXX
0.015 ± 0.005
(0.381 ± 0.13)
0.326 ± 0.010
(8.28 ± 0.25)
0.300 ± 0.010
(7.62 ± 0.25) 0.105 ± 0.010
(2.67 ± 0.25)
Lead Material
#22 AWG
(0.025 Dia.)
Solder Coated
Copper
Resistance
Value Code
XXXXXX
100R01
0.01 %
1.00 ± 0.125
(25.4 ± 3.18)
Model Number
Date Code
10
Week
Optional
Customer P/N
6 Digits Maximum
Tolerance
0.040 ± 0.005
(1.02 ± 0.13)
01
Year
Rear ViewSide ViewFront View
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11
