Features
• High collector-emitter voltage
(VCEO = 70 V)
• High input-output isolation voltage
(Viso = 5000 Vrms)
• Current Transfer Ratio
(CTR: min. 40% at IF = 10 mA, VCE = 5 V)
• Response time
(tr: typ., 5 µs at VCC = 10 V, IC = 2 mA, RL = 100 Ω)
• Dual-in-line package
• UL approved
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available:
– Leads with 0.4" (10.16 mm) spacing (W00)
– Leads bend for surface mounting (300)
– Tape and reel for SMD (500)
– IEC/EN/DIN EN 60747-5-2 approvals (060)
Description
The CNY17 contains a light emitting diode opti-
cally coupled to a photo-transistor. It is packaged in a
6-pin DIP package and available in wide-lead spacing
option and lead bend SMD option. Collector-emitter
voltage is above 70 V. Response time, tr, is typically
5 µs and minimum CTR is 40% at input current of
10 mA.
Applications
• System appliances, measuring instruments
• Signal transmission between circuits of dierent
potentials and impedances
• Feedback circuit in power supply
Functional Diagram
Schematic
CNY17-x
Phototransistor Optocoupler High Collector-Emitter
Voltage Type
Data Sheet
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
1
2
ANODE
CATHODE
VF
+
–
IF6
5
4
BASE
COLLECTOR
EMITTER
IC
6 5 4
1 2 3
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
1. ANODE
2. CATHODE
3. NC
4. EMITTER
5. COLLECTOR
6. BASE
2
Ordering Information
CNY17-x is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Accep-
tance Notice #5, File CA 88324.
RoHS Compliant Option
-1 -2 -3 -4
40% 63% 100% 160%
Part <CTR< <CTR< <CTR< <CTR< Surface Gull Tape IEC/EN/DIN
Number 80% 125% 200% 320% Package Mount Wing & Reel EN60747-5-2 Quantity
-000E -000E -000E -000E 300 mil 65 pcs
DIP-6 per tube
-300E -300E -300E -300E 300 mil X X 65 pcs
DIP-6 per tube
-500E -500E -500E -500E 300 mil X X X 1000 pcs
DIP-6 per reel
-060E -060E -060E -060E 300 mil X 65 pcs
DIP-6 per tube
CNY17
-360E -360E -360E -360E 300 mil X X X 65 pcs
DIP-6 per tube
-560E -560E -560E -560E 300 mil X X X X 1000 pcs
DIP-6 per reel
-W00E -W00E -W00E -W00E 400 mil 65 pcs
DIP-6 per tube
-W60E -W60E -W60E -W60E 400 mil X 65 pcs
DIP-6 per tube
To order, choose a part number from the part number column and combine with the desired option from the op-
tion column to form an order entry.
Example 1:
CNY17-1-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with
40%<CTR<80%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.
Example 2:
CNY17-2-W00E to order product of 400 mil DIP-6 DC in Tube packaging with 63%<CTR<125% and RoHS compli-
ant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
3
Package Outline Drawings
CNY17-X-000E
CNY17-X-W00E
CNY17-X-060E
ANODE
LEAD FREE
DATE
CODE
A CNY17 -
Y Y W W
6.5 ± 0.5
(0.256)
DIMENSIONS IN MILLIMETERS AND (INCHES)
7.3 ± 0.5
(0.287)
2.8 ± 0.5
(0.110)
2.54 ± 0.25
(0.1)
0.5 ± 0.1
(0.02)
3.5 ± 0.5
(0.138)
3.3 ± 0.5
(0.13)
0.5
(0.02)
7.62 ± 0.3
(0.3)
0.26
(0.010)
7.62 ~ 9.98
TYP.
MODEL
NO.
ANODE
LEAD FREE
DATE
CODE
A CNY17- V
Y Y W W
6.5 ± 0.5
(0.256)
DIMENSIONS IN MILLIMETERS AND (INCHES)
7.3 ± 0.5
(0.287)
2.8 ± 0.5
(0.110)
2.54 ± 0.25
(0.1)
0.5 ± 0.1
(0.02)
3.5 ± 0.5
(0.138)
3.3 ± 0.5
(0.13)
0.5
(0.02)
7.62 ± 0.3
(0.3)
0.26
(0.010)
7.62 ~ 9.98
TYP.
MODEL
NO.
6.5 ± 0.5
(0.256)
DIMENSIONS IN MILLIMETERS AND (INCHES)
7.3 ± 0.5
(0.287)
2.8 ± 0.5
(0.110)
2.54 ± 0.25
(0.1)
0.5 ± 0.1
(0.02)
3.5 ± 0.5
(0.138)
7.62 ± 0.3
(0.3)
10.16 ± 0.5
(0.4)
2.3 ± 0.5
(0.09)
6.9 ± 0.5
(0.272)
MODEL
NO.
ANODE
DATE
CODE
LEAD FREE
A CNY17 -
Y Y W W
0.26
(0.010)
4
CNY17-X-300E
30 seconds
60 ~ 150 sec 90 sec 60 sec
60 sec
25°C
150°C
200°C
250°C260°C (Peak Temperature)
217°C
Time (sec)
Temperature (°C)
Absolute Maximum Ratings
Storage Temperature, TS –55˚C to +150˚C
Operating Temperature, TA –55˚C to +100˚C
Lead Solder Temperature, max. 260˚C for 10 s
(1.6 mm below seating plane)
Average Forward Current, IF 60 mA
Reverse Input Voltage, VR 6 V
Input Power Dissipation, PI 100 mW
Collector Current, IC 150 mA
Collector-Emitter Voltage, VCEO 70 V
Emitter-Collector Voltage, VECO 6 V
Collector-Base Voltage, VCBO 70 V
Collector Power Dissipation 150 mW
Total Power Dissipation 250 mW
Isolation Voltage, Viso 5000 Vrms
(AC for 1 minute, R.H. = 40 ~ 60%)
Solder Reow Temperature Prole
1) One-time soldering reow is recommended within
the condition of temperature and time prole shown
at right.
2) When using another soldering method such as in-
frared ray lamp, the temperature may rise partially
in the mold of the device. Keep the temperature on
the package of the device within the condition of (1)
above.
6.5 ± 0.5
(0.256)
DIMENSIONS IN MILLIMETERS AND (INCHES)
7.3 ± 0.5
(0.287)
2.54 ± 0.25
(0.1)
3.5 ± 0.5
(0.138)
7.62 ± 0.3
(0.3)
0.35 +0.15/-0.10
(0.014)
10.16 ± 0.3
(0.4)
1.2 ± 0.1
(0.047)
0.35 ± 0.25
(0.014)
1.0 ± 0.25
(0.039)
ANODE
DATE
CODE
LEAD FREE
A CNY17 -
Y Y W W
MODEL
NO.
Note: Non-halide ux should be used.
Figure 1. Forward current vs. temperature. Figure 2. Collector power dissipation vs. tempera-
ture.
Figure 3. Frequency response.
* CTR = x 100%
IC
IF
Electrical Specications (TA = 25˚C)
Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage VF – 1.4 1.7 V IF = 60 mA
Reverse Current IR – – 10 µA VR = 6 V
Terminal Capacitance Ct – – 100 pF V = 0, f = 1 MHz
Collector Dark Current ICEO – – 50 nA VCE = 10 V
Collector-Emitter Breakdown Voltage BVCEO 70 – – V IC = 0.1 mA, IF = 0
Emitter-Collector Breakdown Voltage BVECO 6 – – V IE = 10 µA, IF = 0
Collector-Base Breakdown Voltage BVCBO 70 – – V IC = 0.1 mA, IF = 0
Collector Current IC 4 – 32 mA IF = 10 mA
*Current Transfer Ratio CNY17-1 CTR 40 – 80 % VCE = 5 V
CNY17-2 63 – 125
CNY17-3 100 – 200
CNY17-4 160 – 320
Collector-Emitter Saturation Voltage VCE(sat) – – 0.3 V IF = 10 mA, IC = 2.5 mA
Response Time (Rise) tr – 5 10 µs VCE = 5 V, IC = 10 mA
Response Time (Fall) tf – 5 10 µs RL = 100 Ω
Isolation Resistance Riso 1 x 1011 – – Ω DC 500 V
40 ~ 60% R.H.
Floating Capacitance Cf – – 2 pF V = 0, f = 1 MHz
IF – FORWARD CURRENT – mA
0
TA – AMBIENT TEMPERATURE – °C
-25 75 125
60
25
20
40
0 50 100-55
80
CNY17-1 fig 1
PC – COLLECTOR POWER DISSIPATION – mW
0
TA – AMBIENT TEMPERATURE – °C
-25 75 125
100
25
50
200
0 50 100-55
150
CNY17-1 fig 2
160
VOLTAGE GAIN AV – dB
-10
f – FREQUENCY – kHz
1 20 500
-2
5
-8
-6
2
2 10 500.5
0
CNY17-1 fig 3
100 200
RL = 200 Ω
IF = 10 mA
VCC = 5 V
TA = 25°C
RL = 150 Ω
RL = 75 Ω
-4
6
Figure 5. Current transfer ratio vs. forward current. Figure 6. Collector current vs. collector-emitter volt-
age.
Figure 7. Relative current transfer ratio vs. tempera-
ture.
Figure 8. Collector-emitter saturation voltage vs.
temperature.
Figure 9. Collector dark current vs. temperature.
Figure 4. Forward current vs. forward voltage.
Figure 11. Collector-emitter saturation voltage vs.
forward current.
Figure 10. Response time vs. load resistance.
CTR – CURRENT TRANSFER RATIO – %
0
IF – FORWARD CURRENT – mA
2 50
120
10
40
80
200
5 200
160
CNY17-1 fig 5
VCE = 5 V
TA = 25°C
RBE =
100 kΩ
180
140
100
60
20 500 kΩ
IC – COLLECTOR CURRENT – mA
0
VCE – COLLECTOR-EMITTER VOLTAGE – V
8 10
30
15
45
20
CNY17-1 fig 6
PC (MAX.)
TA = 25°C
IF = 30 mA
IF = 20 mA
IF = 10 mA
IF = 5 mA
IF = 2 mA
10
5
20
25
35
40
4 6
RELATIVE CURRENT TRANSFER RATIO – %
0
100
50
150
CNY17-1 fig 7
VCE = 5 V
IF = 10 mA
TA – AMBIENT TEMPERATURE – °C
-25 75250 50 100-55
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
0
TA – AMBIENT TEMPERATURE – °C
-25 7525
0.02
0.16
0 50 100-55
0.10
CNY17-1 fig 8
IC = 2.5 mA
IF = 10 mA
0.04
0.06
0.08
0.12
0.14
ICEO – COLLECTOR DARK CURRENT – A
10-13
80200 40 100-30
CNY17-1 fig 9
TA – AMBIENT TEMPERATURE – °C
VCE = 10 V
10-12
10-11
10-10
10-9
10-8
10-7
10-6
60
RESPONSE TIME – µs
RL – LOAD RESISTANCE – kΩ
0.5
1
0.05
0.5
0.02 0.2
2
CNY17-1 fig 10
IF = 10 mA
VCC = 5 V
TA = 25°C
tf
0.1
5
10
tr
0
IF – FORWARD CURRENT – mA
7.5 12.5
2
5.00
CNY17-1 fig 11
2.5 10.0
1
3
4
5
6
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
TA = 25°C
IC = 0.5 mA
IC = 1 mA
IC = 2 mA
IC = 3 mA
IC = 5 mA
7
Test Circuit for Response Time Test Circuit for Frequency Response
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologie s Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0536EN
AV02-0772EN - October 18, 2007
VCC
RD
INPUT
RL
OUTPUT
INPUT
OUTPUT 10%
90%
t
tt
t
f
ds
r
VCC
RD
RL
OUTPUT
~