PulseJackTM Surface Mount 1x1 Description: 100 Base-TX (Fast Ethernet) surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cars (NIC). Features and Benefits: RoHS peak wave reflow temperature rating 245C J0C SMT product, reduced size and low cost alternative to JV series Meets IEEE 802.3 specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE 802.3 requirement SMT Contacts JV0 J0C J30 Electrical Specifications @ 25C - Operating Temperature 0C to +70C Tab 1 Option LEDs Up/Down L/R Turns Ratios RoHS Compliant Part No. BST Circuit Insertion Loss EMI Finger (dB MAX) Return Loss (dB MIN) 100 (15) Common Mode Hipot Rejection (Vrms MIN) (dB MIN) Crosstalk (dB MIN) 1-65 MHz 1-10 MHz 30 MHz 60-80 MHz 1-10 MHz 30-60 MHz 60-100 MHz 1-50 MHz No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JV026I21NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 J3011G21DNL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 J3026G01DNL 1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 TX RX J0C-0003NL 1CT:1 1CT:1 Down No No J0C-0004NL 1CT:1 1CT:1 Down No J0C-0005NL 1CT:1 1CT:1 Down J0C-0006NL 1CT:1 1CT:1 JV006I21NL 1CT:1 JV011I21NL J3026G21DNL 3 JX30-0005NL 50-130 @ 60 Hz MHz 1 MIN Notes: 3 1. LEDs Left/Right: G = green; Y = yellow. 2. Add suffix "T" for Tape & Reel option (e.g. J0C-0004T). 3. Extended Temperature: -40 to 85 C RJ45 Durability Test Rating Mating Force (MAX) Unmating Force (MAX) Durability Part Number Plug to Jack Retention (MIN) J0C/JV/J3 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs. USA 858 674 8100 Germany 49 7032 7806 0 1 Singapore 65 6287 8998 pulseelectronics.com Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 J409.O (07/15) PulseJackTM Surface Mount 1x1 RJ45 Material Specification Housing Shield Part Number Material MSL2 Rating Contact Finish Material J0C/JV/J3 Brass 20-40 inches thick Phosphor Series nickel over Brass Bronze Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements. 2. MSL = Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5 3. (X) = 30 inches gold for JV and J30 platforms and 15 inches gold for J0C platform. Plating Area 3 Solder Area4 Material Specification (X) inches gold over 30-80 inches nickel Tin matte finish High Temp. Thermoplastic UL 94 V-0 1 4. NL parts are tin matte finish over nickel. J0C Platform Schematics J0C-0005NL/J0C-0006NL J0C-0003NL/J0C-0004NL TD+ 1 1 TX+ TD+ 1 CT 4 CT 5 RD- 6 1:1 RECEIVE 6 RX4 5 NC 7 PCB SIDE TO PHY 3 RX+ RD+ 3 CABLE SIDE PCB SIDE TO PHY 1:1 TRANSMIT TD- 2 2 TX- 75 2 TX- 1:1 TRANSMIT RD+ 3 3 RX+ CT 5 75 6 RX- RD- 6 1:1 RECEIVE NC 7 4 75 7 8 GND* 8 CABLE SIDE CT 4 TD- 2 1 TX+ 5 7 GND 8 75 8 NOTE: Connect GND to PCB ground. 2 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 JV Platform Schematics JV011 J0C006 TD+ 2 CT 1 3 RX+ RD+ 4 CT 6 RD- 5 6 RX- 1:1 RECEIVE TD- 3 2 TX- 1:1 TRANSMIT 3 RX+ RD+ 4 CABLE 2 TX- 1:1 TRANSMIT CABLE TD- 3 PCB SIDE TO PHY CT 1 PCB SIDE TO PHY 1 TX+ TD+ 2 1 TX+ CT 6 RD- 5 6 RX- 1:1 RECEIVE 4 4 75 5 75 7 5 75 7 0.001 8 75 75 C1 SHIELD 8 JV026 1 TX+ TD+ 2 TD- 3 2 TX- 1:1 TRANSMIT 3 RX+ RD+ 4 CT 6 RD- 5 75 75 1:1 RECEIVE 75 3 pulseelectronics.com 6 RX4 5 7 0.001 C1 SHIELD CABLE PCB SIDE TO PHY CT 1 8 75 J409.O (07/15) PulseJackTM Surface Mount 1x1 J3 Platform Schematics J3011 J3026 CT 5 6 RX- 1:1 RECEIVE 3 RX+ RD+ 7 CT 6 6 RXRD- 8 1:1 RECEIVE 4 75 9 75 4 5 75 N/C 9 10 75 5 75 75 0.001 2 TX- 1:1 TRANSMIT CABLE CT 6 PCB SIDE TO PHY 3 RX+ RD+ 7 RD- 8 TD- 4 2 TX- 1:1 TRANSMIT CABLE PCB SIDE TO PHY CT 5 TD- 4 1 TX+ TD+ 3 1 TX+ TD+ 3 7 75 7 8 0.001 10 75 8 C1 JX30-0005NL 1 TX+ TD+ 3 CT1 5 2 TX- 1:1 TRANSMIT RD+ 7 3 RX+ 6 RD- 8 CABLE PCB SIDE TO PHY TD- 4 CT2 6 RX- 1:1 RECEIVE 75 4 75 75 9 5 7 10 0.001 75 8 CT1 4 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 J0C Platform Mechanicals J0C-0004NL/06NL EMI Fingers EMI Fingers 5 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 JV Platform Mechanicals JV Series JV0XX121 Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 6 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 J3 Platform Mechanical J3 Series J30XXGX1D Date of Code Country of Origin JX30-0005NL & J3026G21D With EMI Tabs J30-0005NL J3026G21D Date of Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 7 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 J0C Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350H. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attentuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10 (0.004"). Note: Modules are packaged in trays, unless Tape & Reel is specified (ex: J0C-0003NL for Trays and J0C-0003NLT for Tape & Reel). J0C-0003NL/04NL Connector PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to VCC and 50 connections. 2. Connections to ground should be as short as possible. 8 pulseelectronics.com 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length. J409.O (07/15) PulseJackTM Surface Mount 1x1 JV Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350H. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attentuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10 (0.004"). Note: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix "T" for Tape & Reel orders (ex: JVO006121T). Add the suffix "NL" for RoHS compliant parts (ex: JV006I21NLT for Trays and JV006I21NLT for Tape & Reel). JV006I21 Connector PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to VCC and 50 connections. 2. Connections to ground should be as short as possible. 9 pulseelectronics.com 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length. J409.O (07/15) PulseJackTM Surface Mount 1x1 J0C Packaging Specifications J0C Series Tape and Reel Specification Weight ..............7.07 grams Tape & Reel ............ 90/reel Tray ........................ 80/tray Tape ................... 44x32mm Tube ...................... 25/tube Tray Specification 10 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 JV Packaging Specifications JV Series Tape and Reel Specification Weight ................6.6 grams Tape & Reel .......... 150/reel Tray ........................ 45/tray Tape ................... 44x32mm Tray Specification 11 pulseelectronics.com J409.O (07/15) PulseJackTM Surface Mount 1x1 J3 Packaging Specifications J3 Series Tape and Reel Specification O1.50 +0.10 -0 2.000.10 Weight ................8.1 grams Tape & Reel ............ 75/reel Tray ........................ 45/tray Tape ................... 56x32mm 16.95 4.000.10 16.80 52.40.20 26.20.10 56.00.30 32.0 O2.00 +0.25 0 Tray Specification For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 858 674 8100 Tel: 49 7032 7806 Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Road High-Tech Zone Nanshan District Shenzen, PR China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 135 Joo Seng Road #03-02 PM Industrial Bldg. Singapore 368363 Tel: 65 6287 8998 Fax: 65 6287 8998 Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Fax: 886 3 4356823 (Pulse) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2013. Pulse Electronics, Inc. All rights reserved. 12 pulseelectronics.com J409.O (07/15)