DS25004 Rev. 8 - 2 1 of 3 UF3001 - UF3007
www.diodes.com ã Diodes Incorporated
UF3001 - UF3007
3.0A ULTRA-FAST RECTIFIER
Features
DO-201AD
Dim Min Max
A25.40 ¾
B7.20 9.50
C1.20 1.30
D4.80 5.30
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
·Diffused Junction
·Ultra-Fast Switching for High Efficiency
·Surge Overload Rating to 150A Peak
·Low Reverse Leakage Current
·Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
·Case: DO-201AD
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish - Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
·Polarity: Cathode Band
·Marking: Type Number
·Ordering Information: See Last Page
·Weight: 1.1 grams (approximate)
Characteristic Symbol UF
3001 UF
3002 UF
3003 UF
3004 UF
3005 UF
3006 UF
3007 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
(Note 1) @ TA = 55°CIO3.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM 150 A
Forward Voltage @ IF = 3.0A VFM 1.0 1.3 1.7 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage (Note 5) @ TA = 100°CIRM 5.0
100 mA
Reverse Recovery Time (Note 3) trr 50 75 ns
Typical Total Capacitance (Note 2) CT75 50 pF
Typical Thermal Resistance Junction to Ambient RqJA 35 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5.
4. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
5. Short duration pulse test used to minimize self-heating effect.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.